Hostname: page-component-745bb68f8f-v2bm5 Total loading time: 0 Render date: 2025-01-12T08:09:32.889Z Has data issue: false hasContentIssue false
  • English
  • Français

Real Time Monitoring of Amorphous Silicon Solar Cell Fabrication

Published online by Cambridge University Press:  15 February 2011

Yiwei Lu ,
Sangbo Kim ,
J. S. Burnham ,
Ing-Shin Chen ,
Yeeheng Lee ,
Y. E. Strausser ,
C. R. Wronski  and
R. W. Collins
Yiwei Lu
Affiliation:
Materials Research Laboratory, The Pennsylvania State University, University Park, PA 16802.
Sangbo Kim
Affiliation:
Materials Research Laboratory, The Pennsylvania State University, University Park, PA 16802.
J. S. Burnham
Affiliation:
Materials Research Laboratory, The Pennsylvania State University, University Park, PA 16802.
Ing-Shin Chen
Affiliation:
Materials Research Laboratory, The Pennsylvania State University, University Park, PA 16802.
Yeeheng Lee
Affiliation:
Materials Research Laboratory, The Pennsylvania State University, University Park, PA 16802.
Y. E. Strausser
Affiliation:
Digital Instruments, Santa Barbara, CA 93103.
C. R. Wronski
Affiliation:
Materials Research Laboratory, The Pennsylvania State University, University Park, PA 16802.
R. W. Collins
Affiliation:
Materials Research Laboratory, The Pennsylvania State University, University Park, PA 16802.
Get access

Abstract

We have applied real time spectroscopie ellipsometry (RTSE) to monitor the successive growth of p-type a-Si1-xCx:H and i-type a-Si:H on specular SnO2:F (i.e., the superstrate solar cell configuration) in a single-chamber deposition system. Both the microstructural evolution, which includes the surface roughness and bulk layer thicknesses versus time and bulk layer void volume fraction, as well as the optical properties, which include the dielectric function (1.5–4.0 eV) and optical gap of the individual layers, were determined from RTSE data collected during growth. The accuracy of our approach is demonstrated by correlating structural parameters obtained both by RTSE and atomic force microscopy. Based on prior information deduced by RTSE, the TCO/p/i structure was fabricated with optimized procedures that have sought to minimize TCO/'p and p/i interfacial problems. These studies illustrate that RTSE can be a valuable tool for identifying problems in the fabrication of a-Si:H solar cells and ultimately improving cell performance.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 377: Symposium A – Amorphous Silicon Technology 1995 , 1995 , 603
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Luft, W. and Tsuo, Y., Hydrogenated Amorphous Silicon Deposition Processes. (Marcel Dekker, New York, 1993).Google Scholar
2. Collins, R.W., in Amorphous Silicon and Related Materials, ed. Fritzsche, H., (World Scientific, 1988) pp. 1003–1044.Google Scholar
3. Kitagawa, M., Mori, K., Ishihara, S., Ohno, M., Hirao, T., Yoshioka, Y., and Kohiki, S., J. Appl. Phys. 54, 3269 (1983).Google Scholar
4. Kumar, S. and Drevillon, B., J. Appl. Phys. 65, 3023 (1989).Google Scholar
5. Lu, Y., Kim, S., Chen, I.S., Lee, Y., Fortmann, C.M., Wronski, C.R., and Collins, R.W., Proceeding of the First World Conference on Photovoltaic Energy Conversion, (IEEE, 1995), in press.Google Scholar
6. Lu, Y., Burnham, J.S., Kim, S., Koh, J. H., Collins, R.W., and Wronski, C.R., (unpublished).Google Scholar
7. Lu, Y., An, I., Gunes, M., Wakagi, M., Wronski, C.R., and Collins, R.W., Mater. Res. Soc. Symp. Proc. 297, 31 (1993).Google Scholar
8. Collins, R.W., Appl. Phys. Lett. 53, 1086 (1988).Google Scholar
9. Cody, G.D., in Semiconductors and Semimetals. Vol. 21B, ed. Pankove, J.I., (Academic, Orlando, 1984) pp. 11–82.Google Scholar
10. Aspnes, D.E., Theeten, J.B., and Hottier, F., Phys. Rev. B 20, 3292 (1979).Google Scholar
11. Such a layer appears to be detectable by scanning tunneling microscopy; see Ikuta, K., Tanaka, K., Yamasaki, S., Miki, K., and Matsuda, A., Appl. Phys. Lett. 65, 1760 (1994).Google Scholar