Hostname: page-component-78c5997874-ndw9j Total loading time: 0 Render date: 2024-11-08T08:12:56.689Z Has data issue: false hasContentIssue false
  • English
  • Français

Pulsed Laser Deposition of Epitaxial (110) Tin Films on (100) Gaas - Processing, Characterization and Modeling

Published online by Cambridge University Press:  15 February 2011

Tsvetanka Zheleva ,
K. Jagannadham ,
N. Biunno  and
J. Narayan
Tsvetanka Zheleva
Affiliation:
Department of Materials Science and Engineering, North Carolina State University, Raleigh, NC 27695–7916
K. Jagannadham
Affiliation:
Department of Materials Science and Engineering, North Carolina State University, Raleigh, NC 27695–7916
N. Biunno
Affiliation:
Department of Materials Science and Engineering, North Carolina State University, Raleigh, NC 27695–7916
J. Narayan
Affiliation:
Department of Materials Science and Engineering, North Carolina State University, Raleigh, NC 27695–7916
Get access

Abstract

Epitaxial (110) titanium nitride films have been grown on (100) GaAs by pulsed laser deposition technique. The film quality has been found to be a strong function of the processing parameters. The films have been characterized using four point probe resistivity technique, Raman spectroscopy, X-ray diffraction analysis, and transmission electron Microscopy. Single crystal films were obtained at the deposition temperature 450° C and the room temperature resistivity was found to be 49.7 ΜΩ-cm. The epitaxial orientation relationship of the TiN films with the substrate is given by [001]TiN//[110] GaAs and [īlO]TiN// [līO]GaAs. Modeling studies have been performed to characterize the domain epitaxial growth in these large mismatch systems.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 317: Symposium B – Mechanisms of Thin Film Evolution , 1993 , 205
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Vulkonen, E., Karlson, T., Karlson, B. and Johanson, B.O., Proceedings of SPIE, 1983, International TechnicaConference, 401, 41, (1983).Google Scholar
2. McCaldin, J. O. and Sanken, H., Appl. Phys. Utters, 22, 64 (1983).Google Scholar
3. Narayan, J., Tiwari, P., Chen, X., Singh, J., Chowdhury, R., Zheleva, T., Appl. Phys. Letters, 61, 1290, (1992).Google Scholar
4. Singh, R. K., Biunno, N., and Narayan, J., Appl. Phys. Lett., 53, 1013 (1988).Google Scholar
5. Valkonen, E., Karlson, T., Karlson, B. and Johnson, B. O., in Thin Film Technologies, Proc. Soc. Photo-Optical Instruments, Eng, 401 (1982).Google Scholar
6. Spengler, W., Kaiser, R., Christensen, A., Muler-Vogt, G., Phys. Rev. B, 17, 1095, (1978).Google Scholar
7. Zheleva, T., Jagannadham, K., Narayan, J., J. Appl. Phys., 75, (2), (1994).Google Scholar
8. Jagannadham, K. and Marcinkowski, M., Unified Theory of Fracture (Trans. Tech, Zurich, (1983).Google Scholar