Hostname: page-component-586b7cd67f-rcrh6 Total loading time: 0 Render date: 2024-12-01T01:19:35.590Z Has data issue: false hasContentIssue false
  • English
  • Français

Preliminary Measurements of Selective Sensing of DMMP and NH3 Using CNTFET Array Based Gas Sensors Fabricated Using Metal Diversified Electrodes for Electronic Fingerprinting

Published online by Cambridge University Press:  01 February 2011

Paolo Bondavalli ,
Pierre Legagneux  and
Didier Pribat
Paolo Bondavalli
Affiliation:
[email protected], Thales Research and Technology, NANOCARB Lab., 128 Route departementale, Palaiseau, 91767, France, 0033169415883
Pierre Legagneux
Affiliation:
[email protected], Thales Research and Technology, Nanocarb, 128 Rt Dpt, Palaiseau, 91767, France
Didier Pribat
Affiliation:
[email protected], Ecole Polytechnique, LPICM lab, Site de Polytechnique, Palaiseau, 91128, France
Get access

Abstract

This paper deals with preliminary measurements for prove-of-concept of a Carbon Nanotubes Field Effect Transistors (CNTFETs) based sensor array which could improve dramatically gas selectivity. CNTFET based sensors exploit the extremely sensitive change of the Schottky barrier heights between Single Wall Carbon NanoTubes (SWCNTs) and drain/source metal electrodes: the gas adsorption creates an interfacial dipole that modifies the metal work function and so the bending and the height of the Schottky barrier at the contacts [1,2]. Using CNTFET array fabricated using SWCNT mat as channel, we have achieved a sort of electronic fingerprinting of different gases. Actually, we want to demonstrate that the change of the metal electrode work function strictly depends on the metal/gas interaction : CNTFET transfer characteristics will change specifically as a function of this interaction. In this study we have fabricated different CNTFETs using three metal contacts (Au, Pd, Mo) and exposed them to two gases, DMMP and NH3, which have the same “electron-withdrawing” behavior. The CNTFETs array has been exposed to 1ppm of DMMP and 10ppm NH3 and we have identified two electronic fingerprinting. The totality of our measures have been performed at ambient conditions.

Keywords

sensorCfilm
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1081: Symposium P – Carbon Nanotubes and Related Low-Dimensional Materials , 2008 , 1081-P14-02
Copyright
Copyright © Materials Research Society 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Derycke, V., Martel, R., Appenzeller, J., Ph.Avouris, Applied Phys.Lett., 80, 15, p.2773–2775 (2002)Google Scholar
2. Martel, R., Derycke, V., C. Lavoie et al., Phys. Rev. Lett. 87, 85 (2001)Google Scholar
3. Kong, J., Dai, H. et al. Science, 287, p.622–625 (2000)Google Scholar
4. Novak, J. P., Snow, E. S., Houser, E. J. et al., Applied Physics Letters, 83, 19, p.4026–4028 (2003)Google Scholar
5. Qi, P., Vermesh, O., Grecu, M., Dai, H. et al., Nano Lett., 3, p.347–351 (2003)Google Scholar
6. Chen, R. J., Choi, H. C., Bangsaruntip, S., Yenilmez, E. et Dai, H., J. Am. Chem. Soc. 126, 5, p.1563–1568 (2004)Google Scholar
7. Kumar, S. et al., Appl. Phys. Lett., 89, 143501 (2006)Google Scholar
8. Kumar, S., Murthy, J. Y., and Alam, M. A., Phys. Rev. Lett., 95, 066802 (2005)Google Scholar
9. Berkyarova, E., Itkis, M.E., Cabrera, N., Zhao, B., Yu, A., Gao, J., Haddon, R.C., J. Am. Chem. Soc. 127, 5990–5995 (2005)Google Scholar
10. http://www.ou.edu/engineering/nanotube/comocat.htmlGoogle Scholar