Hostname: page-component-586b7cd67f-rdxmf Total loading time: 0 Render date: 2024-11-28T20:21:01.951Z Has data issue: false hasContentIssue false
  • English
  • Français

Planarization of GaN by the Etch-Back Method

Published online by Cambridge University Press:  01 February 2011

Adrian Williams  and
T.D. Moustakas
Adrian Williams
Affiliation:
[email protected], Boston University, Electrical and Computer Engineering, 8 Saint Mary Street, Boston, MA, 02215, United States
T.D. Moustakas
Affiliation:
[email protected], Boston University, Electrical and Computer Engineering, United States
Get access

Abstract

The planarization of GaN has been mainly addressed by chemo-mechanical polishing methods in the literature. Such techniques were found to be successful in planarizing the nitrogen polar (000-1) surface of GaN. However, planarization of the gallium polar (0001) surface presents a challenge due to its higher degree of chemical inertness. Moreover, studies on the planarization of the remaining crystal orientations remain a topic with sparse representation in the literature. In this paper, we report our planarization studies of GaN films using an etch-back technique. Photoresist is employed as the sacrificial layer and a chlorine inductively coupled plasma (ICP) used for etching. We demonstrate the planarization of rough C-plane and A-plane GaN films grown by hydride vapor phase epitaxy (HVPE). Specifically, an rms roughness of approximately 2.1nm and 4.1nm was realized after iterative etch-back for a representative C-plane and A-plane sample with initial rms roughness of 134nm and 414nm respectively.

Keywords

reactive ion etchingvapor phase epitaxy (VPE)nitride
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 892 , 2005 , 0892-FF14-11
Copyright
Copyright © Materials Research Society 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Chen, Chao-Chang A., et al. ., J. of Materials Processing Technology, 140, p. 373 (2003)CrossRefGoogle Scholar
2. Higuchi, M., Journal of the Electrochemical Society, 136, p2710 (1989)CrossRefGoogle Scholar
3. Tuppen, C. G., Conen, B. H., Journal of Crystal Growth, 80, p. 459 (1987)CrossRefGoogle Scholar
4. Zhuang, D., Edgar, J.H., Material Science and Engineering R, 48, p. 1, (2005)CrossRefGoogle Scholar
5. Yonenaga, I., MRS Internet Journal Nitride Semiconductor Research, 7, Article 6 (2002)CrossRefGoogle Scholar
6. Haines, J., Annual Review of Materials Research, 31, p. 1, (2001)CrossRefGoogle Scholar
7. Weyher, J.L., et al. . Journal of Crystal Growth, 182, p. 17 (1997)CrossRefGoogle Scholar
8. Tavernier, P.R., et al. ., Electrochemical and Solid State Letters, 5, G61-G64 (2002)CrossRefGoogle Scholar
9. Eddy, C.R. Jr., et al. ., Journal of Applied Physics, 73, p. 448 (1993)CrossRefGoogle Scholar