Hostname: page-component-586b7cd67f-2plfb Total loading time: 0 Render date: 2024-11-28T14:08:33.986Z Has data issue: false hasContentIssue false
  • English
  • Français

Optimization of the metal/silicon ratio on nickel assisted crystallization of amorphous silicon

Published online by Cambridge University Press:  01 February 2011

L. Pereira ,
M. Beckers ,
R.M.S. Martins ,
E. Fortunato  and
R. Martins
L. Pereira
Affiliation:
Departamento de Ciência dos Materiais, Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa and CEMOP, Campus da Caparica, 2829-516 Caparica, Portugal
M. Beckers
Affiliation:
Institute of Ion Beam Physics and Materials Research, Forschungszentrum Rossendorf, P.O.B. 510119, 01314 Dresden, Germany
R.M.S. Martins
Affiliation:
Institute of Ion Beam Physics and Materials Research, Forschungszentrum Rossendorf, P.O.B. 510119, 01314 Dresden, Germany
E. Fortunato
Affiliation:
Departamento de Ciência dos Materiais, Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa and CEMOP, Campus da Caparica, 2829-516 Caparica, Portugal
R. Martins
Affiliation:
Departamento de Ciência dos Materiais, Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa and CEMOP, Campus da Caparica, 2829-516 Caparica, Portugal
Get access

Abstract

The aim of this work is to optimize the metal/silicon ratio on nickel metal induced crystallization of silicon. For this purpose amorphous silicon layers with 80, 125 and 220 nm thick were used on the top of which 0.5 nm of Ni was deposited and annealed during the required time to full crystallize the a-Si. The data show that the 80 nm a-Si layer reaches a crystalline fraction of 95.7% (as detected by spectroscopic ellipsometry) after annealed for only 2 hours. No significant structural improvement is detected by ellipsometry neither by XRD when annealing the films for longer times. However, on 125 nm thick samples, after annealing for 2 hours the crystalline fraction is only 59.7%, reaching a similar value to the one with 80 nm only after 5 hours, with a crystalline fraction of 92.2%. Here again no significant improvements were achieved by using longer annealing times. Finally, the 220 nm thick a-Si sample is completely crystallized only after 10 hours annealing. These data clear suggest that the crystallization of thicker a-Si layers requires thicker Ni films to be effective for short annealing times. A direct dependence of the crystallization time on the metal/silicon ratio was observed and estimated.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 869: Symposium D – Materials, Integration and Technology for Monolithic Instruments , 2005 , D2.5
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Yoon, S. Y., Park, S. J., Kim, K. H., Jang, J., Thin Solid Films, 383 (2001) 34 Google Scholar
[2] Muramatsu, S.-I., Minagawa, Y., Oka, F., Sasaki, T., Yazawa, Y., Sol. Energy Mater. Sol. Cells 74 (2002) 275 Google Scholar
[3] Harbeke, G., Krausbauer, L., Steigmeier, E. F., a. Widmer, E., Kappert, H. F., Neugebauer, G., J. Electrochem. Soc., 131 (1984) 675 Google Scholar
[4] Iverson, R.B., Reif, R., J. Appl. Phys. 62 (1987) 1675 Google Scholar
[5] Im, J. S., Sposili, R. S., MRS Bulletin, March (1996) 39 Google Scholar
[6] Kim, K. H., Park, S. J., Kim, A. Y., Jang, J., J. Non-Cryst. Solids 299-302 (2002) 83 Google Scholar
[7] Andrade, K., Jang, J., Moon, B. Y., Journal of the Korean Physical Society, 39 (2001) 376 Google Scholar
[8] Ahn, J. H., Eom, J. H., Yoon, K. H., Ahn, B. T., Sol. Energy Mater. Sol. Cells 74 (2002) 315 Google Scholar
[9] Bruggemann, D.A.G., Ann. Phys. (Leipzig) 24 (1935) 636 Google Scholar
[10] Yoon, S. Y., Oh, J. Y., Kim, C. O., J. Jang, Solid State Communications, 106, 6 (1998) 325Google Scholar
[11] Yoon, S. Y., Kim, K. H., Kim, C. O., Oh, J. Y., Jang, J., J. Appl. Phys., 82 (1997) 5865 Google Scholar
[12] Petrik, P., Lohner, T, Fried, M., Bir, L. P.ó, Khanh, N. Q., Gyulai, J., Lehnert, W., Schneider, C., Ryssel, H., J. Appl. Phys., 87 (2000) 1734 Google Scholar
[13] Pereira, L., Águas, H., Martins, R. M. S., Vilarinho, P., Fortunato, E., Martins, R., Thin Solid Films, 451-452 (2004) 334 Google Scholar
[14] Pereira, L., Águas, H., Martins, R. M. S., Fortunato, E., Martins, R., J. Non-Cryst. Solids 338-340 (2004) 178 Google Scholar
[15] Hirose, M., Taniguchi, M., Osaka, Y., J. Appl. Phys., 50 (1979) 377–382 Google Scholar