Hostname: page-component-586b7cd67f-dsjbd Total loading time: 0 Render date: 2024-11-28T19:49:47.379Z Has data issue: false hasContentIssue false
  • English
  • Français

Novel Composite Coatings With 3D Coating Architectures for Tribological Applications Fabricated Using Semiconductor Patterning Processes

Published online by Cambridge University Press:  11 February 2011

James E. Krzanowski ,
Jose L. Endrino  and
Karl Hirschman
James E. Krzanowski
Affiliation:
Mechanical Engineering Department, University of New Hampshire, Durham, NH, 03824
Jose L. Endrino
Affiliation:
Mechanical Engineering Department, University of New Hampshire, Durham, NH, 03824
Karl Hirschman
Affiliation:
Semiconductor and Microsystems Fabrication Laboratory, Rochester Institute of Technology, Rochester, NY 14623
Get access

Abstract

Composite coatings consisting of hard compounds and soft solid lubricant phases have been actively investigated as tribological coatings for reducing friction while improving wear resistance. In most cases structural modifications in these coatings have been achieved by either natural phase separation or sequential layer deposition. In this study, we explore the concept of creating a three-dimensional structure in a tribological composite coating by using well-established semiconductor patterning methods. Using photolithography, we have patterned the substrate surface with a regular array of micron-size islands. The substrate was then coated with various metal and carbide coatings, including Cr and TiC, using sputter deposition. The substrates were sonicated in a solvent to remove the photoresist islands leaving an array of holes. MoS2 was then deposited onto the substrates. A pin-on-disk friction and wear test was conducted on a TiC/MoS2 sample to examine the effects of these islands on wear morphology. The results showed that the MoS2-filled holes can act as lubricant reservoirs, and the areas of the sample coated with TiC/MoS2 provided better wear protection than areas coated with only MoS2.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 750: Symposium Y – Surface Engineering 2002–Synthesis, Characterization and Applications , 2002 , Y3.9
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Endrino, Jose L., Nainaprampil, Jose J., and Krzanowski, James E., Surface Coatings and Technology, vol. 157, p. 95–101 (2002)Google Scholar
2. Endrino, J., Nainaparampril, J.J. and Krzanowski, J.E., Scripta Mat., v 74, pp. 613–618 (2002).Google Scholar
3. Voevodin, A.A., O'Neill, J.P., and Zabinski, J.A., Tribology Letters v. 6, pp. 75–78 (1999).Google Scholar
4. Voevodin, A.A., Hu, J.J., Fitz, T.A. and Zabinski, J.S., Surf. Coat. Tech., v. 146–157, pp. 351–356 (2001).Google Scholar
5. Voevodin, A.A., Bultman, J. and Zabinski, J.S., Surf. Coat. Tech. v. 107, pp. 12–19 (1998).Google Scholar
6. Spalvins, T., Thin Solid Films, v. 96, p. 17 (1982).Google Scholar
7. Fleishauer, P.D. and Bauer, R., Tribol. Trans. v. 31, p. 239 (1988).Google Scholar
8. Donley, M.S., Murray, P.T., Barber, S.A., and Haas, T.W., Surf. Coat. Tech., v. 36, pp. 329–340 (1988).Google Scholar
9. Le Monge, T., Donnet, C., Martin, J.M., Milliard-Pinard, N., Fayeulie, S., and Moncoffre, N., J. Vac. Sci. Tech. A12, pp. 1998–2004 (1994).Google Scholar
10. Zabinski, J.S., Donley, M.S., Walck, S.D., Schneider, T.R., and McDevitt, N.T., Tribology Transactions, v. 38, pp 894–904 (1995).Google Scholar
11. Fox, V.C., Renevier, N., Teer, D.G., Hampshire, J., literature available from Teer Coatings Ltd.Google Scholar