Hostname: page-component-586b7cd67f-gb8f7 Total loading time: 0 Render date: 2024-11-24T10:36:20.620Z Has data issue: false hasContentIssue false
  • English
  • Français

Modulated surface-textured substrates with high haze for thin-film silicon solar cells

Published online by Cambridge University Press:  27 June 2011

O. Isabella ,
P. Liu ,
B. Bolman ,
J. Krč  and
M. Zeman
O. Isabella
Affiliation:
Delft University of Technology, EEC Unit / DIMES, 2600 GB Delft, The Netherlands
P. Liu
Affiliation:
Delft University of Technology, EEC Unit / DIMES, 2600 GB Delft, The Netherlands
B. Bolman
Affiliation:
Delft University of Technology, EEC Unit / DIMES, 2600 GB Delft, The Netherlands
J. Krč
Affiliation:
University of Ljubljana, Faculty of Electrical Engineering, SI-1000 Ljubljana, Slovenia
M. Zeman
Affiliation:
Delft University of Technology, EEC Unit / DIMES, 2600 GB Delft, The Netherlands
Get access

Abstract

Modulated surface-textured substrates for thin-film silicon solar cells exhibiting high haze in a broad range of wavelengths were fabricated. Glass substrates coated with different thicknesses of a sacrificial layer were wet-etched allowing the manipulation of the surface morphology with surface roughness ranging from 200 nm up to 1000 nm. Subsequently, zinc-oxide layers were sputtered and then wet-etched constituting the final modulated textures. The morphological analysis of the substrates demonstrated the surface modulation, and the optical analysis revealed broad angle intensity distributions and high hazes. A small anti-reflective effect with respect to untreated glass was found for etched glass samples. The performance of solar cells on high-haze substrates was evaluated. The solar cells outperformed the reference cell fabricated on a randomly-textured zinc-oxide-coated flat glass. The trend in the efficiency resembled the increased surface roughness and the anti-reflective effect was confirmed also in solar cell devices.

Keywords

photovoltaicscanning electron microscopy (SEM)optoelectronic
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1321: Symposium A – Amorphous and Polycrystalline Thin-Film Silicon Science and Technology , 2011 , mrss11-1321-a17-04
Copyright
Copyright © Materials Research Society 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Krč, J., Zeman, M., Kluth, O., et al. ., Thin Solid Films 426 (2003) 296–304.10.1016/S0040-6090(03)00006-3Google Scholar
2. Carniglia, C. K., Opt. Eng. 18, 104 (1979).10.1117/12.7972335Google Scholar
3. Kambe, M., Takahashi, A., Taneda, N., et al. ., Proceedings of the 33rd IEEE PVSC, San Diego (IEEE, New York, 2008), pp. 1–4.Google Scholar
4. Isabella, O., Moll, F., Krč, J., et al. ., Phys. Status Solidi A, 10.1002/pssa.200982828.Google Scholar
5. Bailat, J., Fesquet, L., Orhan, J.-B., et al. ., 10.4229/25thEUPVSEC2010–3BO.11.5 Google Scholar
6. Isabella, O., Krč, J., and Zeman, M., Appl. Phys. Lett. 97, 101106 (2010);10.1063/1.3488023Google Scholar
7. Jäger, K., Isabella, O., Zhao, L., et al. ., Phys. Status Solidi C, 10.1002/pssc.200982695.Google Scholar