Hostname: page-component-745bb68f8f-b95js Total loading time: 0 Render date: 2025-01-12T10:00:53.479Z Has data issue: false hasContentIssue false
  • English
  • Français

Microstructure of Swift Heavy Ion Irradiated SiC, Si3N4 and AlN

Published online by Cambridge University Press:  21 March 2011

S.J. Zinkle ,
J.W. Jones  and
V.A. Skuratov
S.J. Zinkle
Affiliation:
Oak Ridge National Laboratory, P.O. Box 2008, Oak Ridge, TN 37831-6138USA, [email protected]
J.W. Jones
Affiliation:
Oak Ridge National Laboratory, P.O. Box 2008, Oak Ridge, TN 37831-6138, USA
V.A. Skuratov
Affiliation:
Joint Institute for Nuclear Research, Flerov Lab, Center of Applied Physics, 141980 Dubna, Russia
Get access

Abstract

Cross-section transmission electron microscopy was used to investigate the microstructure of single crystal silicon carbide and polycrystalline silicon nitride and aluminum nitride following room temperature irradiation with either 245 MeV Kr or 710 MeV Bi ions. The fluences ranged from 1×1012/cm2 (single track regime) to 1×1013/cm2. Ion track formation was observed in the Bi ion-irradiated Si3N4 specimen in regions where the electronic stopping power exceeded a critical value of ∼15 keV/nm (depths <24 μm). Ion track formation was not observed at any depth in 245 MeV Kr ion-irradiated Si3N4, in which the maximum electronic stopping power was 14.5 keV/nm. There was no evidence for track formation in either SiC or AlN irradiated with 710 MeV Bi ions, which indicates that the threshold electronic stopping power for track formation in these two ceramics is >34 keV/nm. The high resistance of SiC and AlN to track formation may be due to their high thermal conductivity, but further study is needed to quantitatively evaluate the suitability of the various track formation models.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 650: Symposium R – Microstructural Processes in Irradiated Materials-2000 , 2000 , R3.19
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Toulemonde, M., Bouffard, S., and Studer, F., Nucl. Instr. Meth. B 91, 108 (1994).Google Scholar
2. Zinkle, S.J., Matzke, Hj., and Skuratov, V.A., in Microstructural Processes During Irradiation, MRS Symposium Proceedings, edited by Zinkle, S.J., Lucas, G.E., Ewing, R.C., and Williams, J.S. (Materials Research Society, Warrendale, PA, 1999), Vol. 540, p. 299.Google Scholar
3. Lhermitte-Sebire, I., Vicens, J., Chermant, J.L., Levalois, M., and Paumier, E., Philos. Mag. A 69 (2), 237 (1994).Google Scholar
4. Krstic, V.D., Vlajic, M.D., and Verrall, R.A., Key Engineering Materials 122–124, 387 (1996).Google Scholar
5. Liszkay, L., Havancsák, K., Barthe, M.-F. et al. , in Proc. 12th International Conference on Positron Annihilation, Munich, Germany, August 6-12, 2000, in press.Google Scholar
6. Ziegler, J.F., Biersak, J.P., and Littmark, U., The Stopping and Range of Ions in Solids (Pergamon Press, New York, 1985).Google Scholar
7. Yano, T. and Iseki, T., J. Nucl. Mater. 203, 249 (1993).Google Scholar
8. Wang, C-M, Pan, X., Rühle, M., Riley, F.L., and Mitomo, M., J. Mater. Sci. 31, 5281 (1996).Google Scholar
9. Toulemonde, M., Costantini, J.M., Dufour, Ch. et al. , Nucl. Instr. Meth. B 116, 37 (1996).Google Scholar
10. Meftah, A., Djebara, M., Khalfaoui, N. et al. , Mater. Sci. Forum 248–249, 53 (1997).Google Scholar
11. Toulemonde, M., Ch. Dufour, Meftah, A., and Paumier, E., Nucl. Instr. Meth. B 166–167, 903 (2000).Google Scholar
12. Szenes, G., Phys. Rev. B 51 (13), 8026 (1995).Google Scholar
13. Szenes, G., Nucl. Instr. Meth. B 116, 141 (1996).Google Scholar