Hostname: page-component-586b7cd67f-g8jcs Total loading time: 0 Render date: 2024-11-24T18:19:19.011Z Has data issue: false hasContentIssue false
  • English
  • Français

Mechanical and Structural Stability of Perovskites Membranes in Reducing Environments

Published online by Cambridge University Press:  11 February 2011

Nagendra Nagabhushana ,
William F. Haslebacher ,
Venkat K. Venkataraman  and
Sukumar Bandopadhyay
Nagendra Nagabhushana
Affiliation:
School of Mineral Engineering, University of Alaska Fairbanks Fairbanks, AK 99775–5800, USA
William F. Haslebacher
Affiliation:
US Department of Energy/National Energy Technology Laboratory, 3610 Collins Ferry Road, Morgantown, WV 26507–0880
Venkat K. Venkataraman
Affiliation:
US Department of Energy/National Energy Technology Laboratory, 3610 Collins Ferry Road, Morgantown, WV 26507–0880
Sukumar Bandopadhyay
Affiliation:
School of Mineral Engineering, University of Alaska Fairbanks Fairbanks, AK 99775–5800, USA
Get access

Abstract

Mixed ionic electronic conducting perovskite type oxides are promising materials for potential use in various applications such as in fuel cells and membranes for air separation. An important issue in the development of the perovskites is the structural, chemical and mechanical stability of these materials at high temperatures and reducing environments (oxygen partial pressure from 0.21 to 10−17 atm) encountered in membrane reactors. SrFeO3 oxides doped with La on the A-site and Cr on the B-site showed high strength at room temperature in air. The strength degrades rapidly with an increase in temperature in air as compared to in N2 and CO2/CO environment. Fracture in the material is characterized by non-equilibrium segregation of elements within the grains. The observations provide valuable structure-property correlation as applicable to the long-term behavior of the material in advanced catalytic membrane reactors.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 752: Symposium AA – Membranes–Preparation, Properties and Applications , 2002 , AA6.2
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Mazanec, T.J., Solid State Ionics, 70/71, 11 (1994)Google Scholar
2. Steele, B.C.H, “Dense Ceramic Ion Conducting Membranes” Oxygen Ion and Mixed Conductors and their Technological Applications, eds. Tuller, H.L. et. al (Kluwer, 2000) pp 323–345 Google Scholar
3. Teraoka, Y., Zhang, H.M., Okamoto, K. and Yamazoe, N., Mater. Res. Bull. 23, 51–58 (1988)Google Scholar
4. Stephens, W.T., Mazanec, T.J. and Anderson, H.U., Solid State Ionics, 129, 271 (2000).Google Scholar
5. Tsai, C., Dixon, A.G., Ma, Y.H., Moser, W.R. and Pascucci, M.R., J. Am. Ceram. Soc., 81, 1437–44 (1998).Google Scholar
6. Nagendra, N., Klie, R. F., Browning, N.D. and Bandhopadhyay, S., Mat. Sci. Eng A 341/1–2, 236–246 (2002)Google Scholar
7. Anstis, G.R., Chantikul, P., Lawn, B.R. and Marshall, D.B., J. Am. Ceram. Soc., 64, 533–28 (1981)Google Scholar
8. Nagendra, N. and Bandopadhyay, S., Scripta Materialia, 48/1, 37–42 (2003)Google Scholar
9. Sakai, N., Horita, T., Yokokawa, H., Dokiya, M., Kawada, T., Solid State Ionics, 80–88, 1273–1278 (1996)Google Scholar
10. van Doorn, R.H.E. and Burggraaf, A.J., Solid State Ionics, 128, 65–78 (2000).Google Scholar
11. Klie, R.F, Browning, N.D, J. Electron. Microscopy 51, S59–S66 (2002)Google Scholar