Hostname: page-component-586b7cd67f-g8jcs Total loading time: 0 Render date: 2024-11-28T18:24:06.265Z Has data issue: false hasContentIssue false
  • English
  • Français

High-resolution Electron Microscopy of grain Boundary Structures in Yttria-stabilized Cubic Zirconia

Published online by Cambridge University Press:  21 March 2011

K. L. Merkle ,
L. J. Thompson ,
G.-R. Bai  and
J. A. Eastman
K. L. Merkle
Affiliation:
Materials Science Division, Argonne National Laboratory, Argonne, IL 60439, U. S. A
L. J. Thompson
Affiliation:
Materials Science Division, Argonne National Laboratory, Argonne, IL 60439, U. S. A
G.-R. Bai
Affiliation:
Materials Science Division, Argonne National Laboratory, Argonne, IL 60439, U. S. A
J. A. Eastman
Affiliation:
Materials Science Division, Argonne National Laboratory, Argonne, IL 60439, U. S. A
Get access

Abstract

The atomic-scale structure of grain boundaries (GBs) in yttria-stabilized cubic zirconia (YSZ) was investigated by high-resolution electron microscopy (HREM). Non-stoichiometric oxides have found a wide range of applications and therefore it is of importance to explore the role of GBs and their atomic-scale relaxation modes. [001] and [110] tilt GBs were examined by HREM in highly textured thin films of YSZ grown by metal-organic chemical vapor deposition (MOCVD). In addition, a special technique was developed to also allow the HREM study of twist and general GBs. GBs and triple junctions show quite dense arrangements of cation atomic columns. The GB core structures in YSZ can be contrasted to the more open structures in stoichiometric cubic oxides, such NiO, which are characterized by a relatively large GB excess volume. This appears to be due to several factors, including the necessary rearrangement of the oxygen sublattice near GBs in a CsCl2 type structure, the redeployment of oxygen vacancies near GBs, and the segregation of Y to the GB. Relative to stoichiometric oxides, such mechanisms provide additional degrees of freedom for atomic relaxations at GBs and the development of low-energy GBs. These additional relaxation modes, which result in GB cation arrangements more akin to metallic systems, are also reflected by Burgers vector dissociations observed in low-angle YSZ GBs.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 654: Symposia AA – Structure-Property Relationships of Oxide Surfaces & Interfaces , 2000 , AA1.6.1
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Merkle, K. L., Bai, R.-R., Li, Z., Song, C.-Y., and Thompson, L. J., phys. stat. sol. (a) 166, 73 (1998).Google Scholar
2. Bollmann, W., Crystal defects and crystalline interfaces, (Springer, Berlin, 1970).Google Scholar
3. Merkle, K. L., Microscopy and Microanalysis 3, 339 (1997).Google Scholar
4. Merkle, K. L., and Smith, D. J., Phys. Rev. Lett. 59, 2887 (1987).Google Scholar
5. Sutton, A. P., and Balluffi, R. W., Interfaces in Crystalline Materials, (Clarendon Press, Oxford, 1995).Google Scholar
6. Pond, R. C.. Interfaces and Dislocations, Oxford. Oxford University Press 1985, 71.Google Scholar
7. Merkle, K. L., and Smith, D. J., Ultramicroscopy 22, 57 (1987).Google Scholar
8. Merkle, K. L., and Wolf, D., Materials Science Forum 126–128, 65 (1993).Google Scholar
9. Merkle, K. L., Interface Science 2, 311 (1995).Google Scholar
10. Rittner, J. D., and Seidman, D. N., Phys. Rev. B 54, 6999 (1996).Google Scholar
11. Merkle, K. L., and Thompson, L. J., Phys. Rev. Lett. 83, 556 (1999).Google Scholar