Hostname: page-component-586b7cd67f-rdxmf Total loading time: 0 Render date: 2024-11-28T13:51:42.075Z Has data issue: false hasContentIssue false
  • English
  • Français

Hard and Soft Composition Lead Zirconate Titanate Thin Films Deposited by Pulsed Laser Deposition

Published online by Cambridge University Press:  10 February 2011

Johanna L. Lacey  and
Susan Trolier-McKinstry
Johanna L. Lacey
Affiliation:
Intercollege Materials Research Laboratory, The Pennsylvania State University, University Park, PA [email protected]
Susan Trolier-McKinstry
Affiliation:
Intercollege Materials Research Laboratory, The Pennsylvania State University, University Park, PA 16803
Get access

Abstract

Lead zirconate titanate thin films offer considerably larger piezoelectric coefficients than do ZnO, and so are attractive for microelectromechanical sensors and actuators. To date, much of the research in this field has concentrated on undoped PZT. In this work, PZT films grown from both hard and soft PZT targets have been deposited on platinum coated silicon wafers by pulsed laser deposition so that the effect of doping on the properties can be determined. Dielectric constants of 1000–1500 are regularly achieved in both types of films, with loss values varying from 0.01 for soft films to 0.03 for hard films. Remanent polarizations are typically 30 μC/cm2 for both types of films with no observable difference in coercive fields. When subjected to ∼140 MPa of biaxial tension and compression, only small (∼5%) reversible changes were observed, indicating a lack of substantial domain reorientation in the films.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 459: Symposium Y – Materials for Smart Systems II , 1996 , 207
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Jaffe, B., Cook, W., and Jaffe, H., Piezoelectric Ceramics, Academic Press, 1971.Google Scholar
[2] Tuttle, B., Garino, T.J., Voigt, J., Headley, T., Dimos, D., and Eatough, M.O., Scince and Technology of Electroceramic Thin Films, Auciello, O. and Waser, R., eds. Kluwer Academic Publishers (1995).Google Scholar
[3] Klissurska, R.D., Brooks, K., Reaney, I. M., Pawlaczyk, C., Kosec, M., and Setter, N., Journal of the American Ceramic Society, 786 pp. 1513–1520, (1995).Google Scholar
[4] Cao, W. and Randall, C., J. Phys. Chem. Solids, 57 10 pp 1499–1505 (1996).Google Scholar
[5] Shepard, J. and Trolier-McKinstry, S., Materials Research Society Meeting, Fall 1996.Google Scholar
[6] Kim, N., Ph.D. Thesis, The Pennsylvania State University, (1994).Google Scholar
[7] Brown, R.F., Can. J. of Phys. 39 (1961).Google Scholar
[8] Zhang, Q.M., Zhao, J., Uchino, K., Zheng, J., J. Mat. Res., submitted April 1996.Google Scholar