Hostname: page-component-586b7cd67f-t7fkt Total loading time: 0 Render date: 2024-11-28T09:51:08.776Z Has data issue: false hasContentIssue false
  • English
  • Français

Field Induced Dielectric Properties of 0.7Pb(Mg1/3Nb2/3)O3-0.3PbTiO3 Thin Films

Published online by Cambridge University Press:  11 February 2011

Apurba Laha ,
S. Saha  and
S. B. Krupanidhi
Apurba Laha
Affiliation:
Materials Research Centre, Indian Institute of Science, Bangalore -560 012, INDIA
S. Saha
Affiliation:
Materials Science Division, Argonne National Laboratory, 9700, S. Cass Avenue, Argonne, IL-60439, USA
S. B. Krupanidhi
Affiliation:
Materials Research Centre, Indian Institute of Science, Bangalore -560 012, INDIA
Get access

Abstract

DC electric field induced dielectric properties of 0.7Pb(Mg1/3Nb2/3)O3-0.3PbTiO3 (PMN-PT) thin films were studied as a function of frequency at different temperatures. It was observed that the dielectric constant (ε) and dissipation factor (tanδ) were decreased in presence of bias field. The temperature of dielectric maxima was found to increase with increasing bias level. The low temperature (<Tm) frequency dispersion of dielectric permittivity was suppressed with the application of dc bias. After a certain bias voltage the relaxor property of films was disappeared i.e. the films exhibited normal ferroelectric behavior. Since the absence of long range interaction among the nanopolar clusters in PMN and its family is believed to be the origin of relaxor behavior, disappearance of relaxor nature in PMN-PT (70/30) films could be attributed to manifestation of long-range order at higher bias voltage. This was observed in the temperature dependence of dielectric constant i.e. the films neither exhibited any frequency dispersion in the temperature of dielectric maximum (Tm) nor showed any diffused phase transition. The relaxor property of PMN-PT thin films was studied in terms of diffused phase transition together with frequency dispersion of the temperature of dielectric maximum (Tm). Vogel-Fulcher relation was used to analyze the frequency dependence of temperature of dielectric maximum.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 748: Symposium U – Ferroelectric Thin Films XI , 2002 , U14.11
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Smolenski, G. A. and Agranovska, A., Sov. Phys. Solid State 1, 1429 (1960).Google Scholar
2. Viehland, , Jang, S. J., Cross, L. E., and Wuttig, M., J. Appl. Phys. 69, 414 (1991).Google Scholar
3. Buther, S. J. and Daglish, M., Ferroelectrics Letters 10, 117 (1989).Google Scholar
4. Swartz, S. L. and Shrout, T. R. Mat. Res. Bull., 72, 1335 (1989).Google Scholar
5. Zhang, Y., Gui, H., Li, L., and Gui, Z., Jpn. J. Appl. Phys. 36, L1325 (1997).Google Scholar
6. Burns, G. and Dacol, F. H., Phys. Rev. B, 28, 2527 (1983).Google Scholar
7. Viehland, D., Jang, S., Cross, L. E., and Wuttig, M., Phys. Rev. B, 43, 8316 (1991).Google Scholar
8. Tagantsev, A. K.. Phys. Rev. Lett. 72, 1100 (1994).Google Scholar
9. Tyunina, M. and Levoska, J., Phys. Rev. B 63, 224102 (2001).Google Scholar