Hostname: page-component-586b7cd67f-g8jcs Total loading time: 0 Render date: 2024-12-01T06:09:02.255Z Has data issue: false hasContentIssue false
  • English
  • Français

Fabrication of (Ti-O-N-Si)/Ti Composite Coating on NiTi Shape Memory Alloy Using PIIID and Coating Evaluation

Published online by Cambridge University Press:  31 January 2011

Tao Sun ,
Langping Wang  and
Min Wang
Tao Sun
Affiliation:
[email protected], The University of Hong Kong, Mechanical Engineering, Hong Kong, China
Langping Wang
Affiliation:
[email protected], Harbin Institue of Technology, Welding Science and Engineering, Harbin, Hei Long Jiang, China
Min Wang
Affiliation:
[email protected], The University of Hong Kong, Mechanical Engineering, Hong Kong, Hong Kong
Get access

Abstract

A compact and uniform (Ti, Si, O, N)/Ti composite coating was fabricated on the surface of a NiTi shape memory alloy (SMA) (containing 50.8 at.% Ni) using plasma immersion ion implantation and deposition (PIIID) with radio-frequency (RF) magnetron sputtering. The coating and coated NiTi SMA were studied using various techniques. Analysis showed that the Ni content was drastically reduced on the surface of coated samples due to coating formation. This could greatly improve the biocompatibility of NiTi SMA. There was no TiO2 or TiN formation in the coating. The shape memory ability of NiTi SMA samples was no deteriorated by the coating process. The coating significantly improved the corrosion resistance and wear resistance of NiTi SMA and also rendered the material bioactive.

Keywords

biomaterialcoatingphysical vapor deposition (PVD)
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1239: Symposium VV – Micro- and Nanoscale Processing of Biomaterials , 2009 , 1239-VV02-04
Copyright
Copyright © Materials Research Society 2010

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Michiardi, A. Aparicio, C. Ratner, B.D. Planell, J.A. and Gil, J. Biomaterials 28, 586–594 (2007).Google Scholar
2 Kokubo, T. Kim, H.M. and Kawashita, M. Biomaterials 24, 2161–2175 (2003).Google Scholar
3 Goodman, S.B. Ma, T. Chiu, R. Ramachandran, R. and Smith, R.L. Biomaterials 27, 6096–6101 (2006).Google Scholar
4 Liu, J.X. Yang, D.Z., Shi, F. and Cai, Y.J. Thin Solid Films 429, 225–230 (2003).Google Scholar
5 Sun, T. and Wang, M. Appl. Surf. Sci. 255, 396–400 (2008).Google Scholar
6 Sun, T. Wong, J.H.W. and Wang, M. Mater. Sci. Forum 618-619, 319–323 (2009).Google Scholar
7 Wang, J. and Jiang, N. Diam. Relat. Mater. 18, 1321–1325 (2009).Google Scholar
8 Sun, T. Wang, L.P. Wang, M. Proc. 2nd Asian Symposium on Advanced Materials. Shanghai 54-56 (2009).Google Scholar
9 Thian, E.S., Huang, J., Best, S.M., Barber, Z.H., Bonfield, W., Biomaterials, 26, 2947–2956 (2005).Google Scholar
10 Wang, L. Huang, L. Xie, Z. Wang, X. and Tang, B. Rev. Sci. Instrum. 79, 023306-1-023306-4 (2008).Google Scholar
11 Chan, Y.L. Wu, S.L. Liu, X.M. Chu, P.K. K.Yeung, W.K. Lu, W.W. A.Ngan, H.W. Luk, K.D.K., Chan, D. and K.Cheung, M.C. Surf. Coat. Tech. 202, 1308–1312 (2007).Google Scholar