Fabrication and Characterization of Antimony Tin Oxide Nanoparticle Networks Inside Polystyrene

Abstract

Recently, there has been much interest in the creation of 3D networks of nanowires. One possible way to do this is to encase the nanowires inside transparent polymer matrices since there is also a demand for obtaining conducting transparent composites. If the filler of the composite is made from a strongly conducting material, the degree of connectivity of the networked nanowires can be tested by measuring its conductivity. Though much work has been done with ITO (Tin-doped indium oxide), little has been done with the chemically similar, but cheaper, ATO (Antimony-doped tin oxide). In this study, ATO nanoparticles were added into a polystyrene matrix and simultaneously pressed and heated so that a 3D network of the nanoparticles would form. The effecti veness of the conducting pseudo-nanowire networks was measured as the concentration of ATO in polystyrene was varied. Another variable utilized was the temperature at which the samples were pressed. The optical transmittance of the composites was also measured in order to quantify their transparency. It was found that, once the nanowire networks had percolated at a concentration of about 1.25 PHR, the conductivity and, consequently, the coherence of the networks increased at a decreasing rate as the concentration was increased. The effect of the pressing temperature was complex and required many additional sets of specimens to understand. Samples pressed at the highest temperature had the least coherent networks, as the polystyrene became too fluid and disrupted the ATO networks while at lower temperatures the opposite occurred. The optical transmittance dropped sharply as the concentration of ATO reached and surpassed 1.0 PHR. Nanowire networks were, indeed, formed through this process using these materials, but use as a conducting transparent composite in the visible range is unlikely as the percolation threshold occurs at a concentration greater than that of the optical transmittance drop, creating a trade-off between conductivity and transparency. The resistivity did drop as much as six orders of magnitude and may be useful for other applications.