Hostname: page-component-78c5997874-t5tsf Total loading time: 0 Render date: 2024-11-02T23:24:36.793Z Has data issue: false hasContentIssue false
  • English
  • Français

Exploration of Electrophoretic Deposition of YSZ Electrolyte for Solid Oxide Fuel Cells

Published online by Cambridge University Press:  01 February 2011

Zhigang Xu ,
Gukan Rajaram  and
Jag Sankar
Zhigang Xu
Affiliation:
Center for Advanced Materials and Smart Structures, North Carolina Agricultural and Technical State University, 1601. East Market Street, Greensboro, NC 27411, U.S.A.
Gukan Rajaram
Affiliation:
Center for Advanced Materials and Smart Structures, North Carolina Agricultural and Technical State University, 1601. East Market Street, Greensboro, NC 27411, U.S.A.
Jag Sankar
Affiliation:
Center for Advanced Materials and Smart Structures, North Carolina Agricultural and Technical State University, 1601. East Market Street, Greensboro, NC 27411, U.S.A.
Get access

Abstract

The suspensions of yttria stabilized zirconia (YSZ) were prepared in pure acetylacetone and ethanol and their mixtures. In all of the suspensions, YSZ thin films were obtained using electrophoretic deposition technique on the substrates of stainless steel and porous strontium-doped lanthanum manganite (LSM) which is a typical cathode materials used in solid oxide fuel cells (SOFCs). The deposition behavior in the different suspensions was studied. The deposited films were dried at room temperature and then sintered at high temperature. Observation with scanning electron microscopy (SEM) showed the sintered YSZ were of high density.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 835: Symposium K – Solid-State Ionics , 2004 , K8.2
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Sarkar, P., Huang, X., and Nicholson, P., J. Am. Ceram. Soc., 76, 1055 (1993).Google Scholar
2. Nicholson, P.S., Sarkar, P., and Haung, X., J. Mater. Sci, 28, 6274 (1993).Google Scholar
3. Baumgartner, C.E., Decarlo, V.J., Glugla, P.G., and Grimaldi, J., J. Electrochem. Soc. 132, 57 (1985).Google Scholar
4. Chu, C.T. and Dunn, B., Appl. Phys. Lett., 55, 492–94(1993).Google Scholar
5. Yuan, Y., Wang, X., and Xiao, P., J. Euro. Ceram. Soc., 24, 2233 (2004).Google Scholar
6. Negishi, H., Yamaji, K., Sakai, N., Horita, T., Yanagishita, H. and Yokokawa, H., J. Mater. Sci, 39, 833 (2004).Google Scholar
7. Wang, Z., Shemilt, J., and Xiao, P., J. Euro. Ceram. Soc. 22, (2002).Google Scholar
8. Naigai, M., Yamashita, K., Umegaki, T., and Takuma, Y., J. Am. Ceram. Soc., 76, 253 (1993).Google Scholar
9. Louh, R., Hsu, Y., Mater. Chem. Phy. 79, 226 (2003).Google Scholar
10. Zhitomirsky, I. and Petric, A., J. Mater. Sci., 39, 825 (2004).Google Scholar