Hostname: page-component-78c5997874-8bhkd Total loading time: 0 Render date: 2024-11-02T23:27:00.637Z Has data issue: false hasContentIssue false
  • English
  • Français

Epoxy Cure Monitoring With An Interdigitated Gate Electrode Field Effect Transistor (IGEFET)

Published online by Cambridge University Press:  10 February 2011

E. S. Kolesar  and
J. M. Wiseman
E. S. Kolesar
Affiliation:
Texas Christian University, Department of Engineering, Forth Worth, TX 76129
J. M. Wiseman
Affiliation:
SRT Electro-Optics, Birmingham, AL 35203
Get access

Abstract

An interdigitated gate electrode field-effect transistor (IGEFET) was designed, fabricated and used to monitor the cure of a common epoxy. The IGEFET sensor consists of an interdigitated gate electrode structure which is coupled to the gate contact of a conventional metal-oxide-semiconductor field-effect transistor (MOSFET). The epoxy was deposited on the interdigitated gate electrode, and the IGEFET's electrical performance was observed as the epoxy cured. The cross-linking chemical reaction during epoxy cure caused electrical impedance changes that were quantified when the IGEFET was operated with a periodic voltage pulse signal. Charge transferred through the chemically-active epoxy is manifested as a temporally-dependent potential applied to the MOSFET's gate contact. By operating the MOSFET as a linear amplifier, a potential corresponding to the temporally-dependent gate voltage was directly measured at the amplifier's output. The Fourier transform of the IGEFET's time-domain response at specific time increments was computed. The resulting epoxy cure spectra were compared to a reproducible baseline spectrum, and an ensemble of difference spectra were computed to reveal the epoxy's chemical state at specific instances of time. The difference spectra features yield valuable information concerning the state of the epoxy's cure.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 503: Symposium JJ – Nondestructive Characterization of Materials in Aging Systems , 1997 , 93
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Goldberg, B. and Semmel, M., Dielectric Cure Monitoring: Preliminary Studies, National Aeronautics and Space Administration, NASA-TM-86452, May 1984.Google Scholar
2. Miller-Stephenson Chemical Company, Incorporated, Epoxy Systems: Technical InformatioM, Product brochure, Danbury, CT, 1988.Google Scholar
3. Gillham, J.K., Polym. Engr. Sci., 19, p. 676 (1979).Google Scholar
4. Larsen, D.W. and Strange, J.H., J. Polym. Sci., Polym. Phys. Ed., 11, p. 1453 (1973).Google Scholar
5. Warfield, R.W. and Petree, M.C., J. Polym. Sci., 37, p. 305 (1959).Google Scholar
6. Senturia, S.D. and Sheppard, N.F., “Dielectric Analysis of Thermoset Cure,” in Epoxy Resins and Composites IV, edited by K., Dusek (Springer-Verlag: New York, 1986).Google Scholar