No CrossRef data available.
Article contents
Electrodeposition of Group III Doped PbTe Nanowires
Published online by Cambridge University Press: 01 February 2011
Abstract
Nanowire arrays of PbTe were electrodeposited into porous alumina templates with 40nm pores. Citric acid was used as a complexing agent for HTeO2 + shifting the reduction potential of HTeO2 +/Te closer to that of Pb2+/Pb. Compositional analysis of the wires grown with the complexing agent show a 1:1 ratio of Pb:Te without any excess tellurium. Group III elements (In3+ and Tl+) can be added to the deposition solution and incorporated into the nanowires. It is proposed that indium incorporates into the PbTe lattice in a high energy interstitial site causing the lattice parameter to increase linearly with increasing indium incorporation. The addition of thallium to the deposition solution leads to a mixture of PbTe and TlTe nanowires. Upon annealing, the TlTe melts incongruently to Tl5Te3, which then alloys with PbTe, thereby increasing the lattice parameter.
- Type
- Research Article
- Information
- Copyright
- Copyright © Materials Research Society 2010