Hostname: page-component-78c5997874-xbtfd Total loading time: 0 Render date: 2024-11-02T23:12:04.552Z Has data issue: false hasContentIssue false
  • English
  • Français

The effects of PBB on the dielectric properties of BST film

Published online by Cambridge University Press:  26 February 2011

Jin Cheol Kim  and
Jun Rok Oh
Jin Cheol Kim
Affiliation:
[email protected], samsung Electro-Mechanics, R & D Center, 314 Maetan-3dong Yeongtong gu, suwon, N/A, 443-743, Korea, Republic of, 82-31-21-2714
Jun Rok Oh
Affiliation:
[email protected], samsung electro mechanics, R & D center, Korea, Republic of
Get access

Abstract

The mixture of PbO-Bi2O3-B2O3 (PBB) were formed on the Ba0.5Sr0.5TiO3 (BST) film and the effects of PBB phase on the dielectric properties of the BST film were investigated. The amorphous PBB layer was deposited on the BST film using rf magnetron sputtering and diffused into the film by heat treatment. The PBB phase in BST film was identified by energy dispersive spectrometer (EDS). Dielectric properties of BST film were significantly improved after the diffusion of PBB. The leakage current density of BST film decreased from 3.24×10-5 A/cm2 to 9.45×10-8 A/cm2 at 1.5 V and the dielectric constant increased from 238 to 533. These results show that the diffusion of insulating metal oxide into the ferroelectric thin film can improve the dielectric properties of the film.

Keywords

filmdielectric propertiestransmission electron microscopy (TEM)
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 902: Symposium T – Ferroelectric Thin Films XIII , 2005 , 0902-T10-07
Copyright
Copyright © Materials Research Society 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Lee, M., Eusemann, R., Waser, R., Brand, W. and van Hal, H., J. Appl. Phys. 72 (1992) 1566.Google Scholar
2 Koyama, K., Sakuma, T., Yamamichi, S., Watanabe, H., Aoki, H., Ohya, S., Miyasaka, Y., and Kikkawa, T., IEDM, Technical Digest, 91 (1991) 823.Google Scholar
3 Horikawa, T., Mikami, N., Makita, T., Tanimura, J., Kataoka, M., Sata, K., and Nunoshita, M., Jpn. J. Appl. Phys. 32 (1993) 4126.Google Scholar
4 Bhattacharya, P., Park, K., and Nishioka, Y., Jpn. J. Appl. Phys. 33 (1994) 5231.Google Scholar
5 Park, H. D., and Payne, D. A., Grain Boundary Phenomena in Electronic Ceramics ed. by Levinson, Lionel M.(Advance in Ceramics, Vol. 1, American Ceramics Society, Columbus, Oh, 1981) 242.Google Scholar