Hostname: page-component-586b7cd67f-2brh9 Total loading time: 0 Render date: 2024-12-01T00:20:34.854Z Has data issue: false hasContentIssue false
  • English
  • Français

The Effect of Slag and Limestone Filler on Resistivity, Sorptivity, and Permeability of Concrete with Low Paste Content

Published online by Cambridge University Press:  22 November 2012

Yury A. Villagrán Zaccardi ,
Ángel A. Di Maio  and
Roberto Romagnoli
Yury A. Villagrán Zaccardi
Affiliation:
LEMIT and CONICET, 52 entre 121 y 122, 1900 La Plata, Argentina
Ángel A. Di Maio
Affiliation:
LEMIT and CONICET, 52 entre 121 y 122, 1900 La Plata, Argentina
Roberto Romagnoli
Affiliation:
CIDEPINT and CONICET, 52 entre 121 y 122, 1900 La Plata, Argentina
Get access

Abstract

This paper deals with several concrete properties and to what extent they are influenced by slag and limestone filler, either one or both of them are included. Concrete was designed for low paste content, this is, a water reducing admixture (WR) was used to limit mixing water content. The results are compared with concrete made with commercial composite cement, blended during milling. Concrete was tested for compressive strength, sorptivity, resistivity, and water penetration under pressure. The volume of paste in all concrete mixes was the same.

Results showed the effect of slag on concrete transport properties. The effect of limestone filler was minimal either admixed solely or in conjunction with slag. On the other hand, blended cement appeared to be less effective on improving concrete transport properties. Compressive strength was less affected than transport properties by slag inclusion.

Keywords

compositeadditiveselectrical properties
Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 1488: Symposium 7B – Concrete with Smart Additives and Supplementary Cementitious Materials , 2012 , imrc12-1488-07b-002
Copyright
Copyright © Materials Research Society 2012 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Bonavetti, V.L., in Hormigones Especiales, ed. Irassar, E.F., (AATH, La Plata, Argentina, 2004), 97–142.Google Scholar
Thomas, M.D.A., Bamforth, P.B., Cem. Concr. Res., 29, (1999), 487–495.CrossRefGoogle Scholar
Irassar, E.F., Bonavetti, V., Trezza, M., Donza, H., in Memorias del V CONPAT, (ALCONPAT, Montevideo, Uruguay, 1999), 305–312.Google Scholar
Menéndez, G., in Memorias de las Jornadas Tecnológicas sobre Corrosión de Armaduras en Estructuras de Hormigón, (AATH, Mar del Plata, Argentina, 2002), 96–109.Google Scholar
Bonavetti, V.L., Donza, H., Rahal, V., Irassar, E.F., Cem. Concr. Res., 30, (2000), 703–708.CrossRefGoogle Scholar
IRAM 50000, (IRAM, Buenos Aires, Argentina, 2000), 31p.Google Scholar
Menéndez, G., Bonavetti, V., Irassar, E.F., Cem. Concr. Comp., 25, (2003), 61–67.CrossRefGoogle Scholar
Bonavetti, V.L., Irassar, E.F., Menéndez, G., Carrasco, M.F., Donza, H., in Proceedings fib Simposium Structural Concrete and Time, (fib, La Plata, Argentina, 2005), 1, 201–208.Google Scholar
Villagrán Zaccardi, Y.A., Ingreso de cloruro en hormigones con CPC - Influencias del tiempo y de la capacidad de fijación, (MSc Thesis, UNCPBA, Olavarría, 2009), 128p.Google Scholar
Villagrán Zaccardi, Y.A., Matiasich, C. (2004), Cienc. Tecnol. Hormig., 11, (2004), 59–72.Google Scholar
Menéndez, G., Bonavetti, V.L., Irassar, E.F., Mater. Construcc., 285, (2007), 31–43.Google Scholar
IRAM 1871, (IRAM, Buenos Aires, Argentina, 2004), 12 p.Google Scholar
Hall, C., Hoff, W.D., Water Transport in Brick, Stone and Concrete, (Taylor & Francis, Nueva York, USA, 2002), 318p.Google Scholar
Taus, V.L., Análisis de la Succión Capilar en Hormigones: Influencia de distintos Parámetros de Ensayo, (MSc Thesis, UNCPBA, 2010), 170p.Google Scholar
IRAM 1554, (IRAM, Buenos Aires, Argentina, 1983), 13p.Google Scholar
Basheer, P.A.M., in Handbook of analytical techniques in concrete science and technology. Principles, Techniques and Applications, ed. Ramachandran, V.S., Beaudoin, J.J., (Noyes Publications, New Jersey, USA, 2001), 658–737.CrossRefGoogle Scholar
Osterminsky, K., Schieβl, P., Volkwein, A., Mayer, T.F., Mater. Corr., 57, (2006), 926–931.CrossRefGoogle Scholar
Basheer, P.A.M., Gilleece, P.R.V., Long, A.E., Mc Carter, W.J., Cem. Concr. Comp., 24, (2002), 437–449.CrossRefGoogle Scholar
Polder, R.B., Peelen, W.H.A., Cem. Concr. Comp., 24, (2002), 427–435.CrossRefGoogle Scholar
Richardson, M.G., Fundamentals of Durable Reinforced Concrete, (Spon Press, London and New York, 2002), 260p.CrossRefGoogle Scholar