Hostname: page-component-78c5997874-g7gxr Total loading time: 0 Render date: 2024-11-08T02:45:41.333Z Has data issue: false hasContentIssue false
  • English
  • Français

Design and Commissioning of a Continuous Transferred ARC Plasma Melter for the Vitrification of Nuclear Waste

Published online by Cambridge University Press:  25 February 2011

R. J. Munz  and
G. Q. Chen
R. J. Munz
Affiliation:
Department of Chemical Engineering, McGill University, Montreal, Quebec, Canada, H3A 2A7
G. Q. Chen
Affiliation:
Department of Chemical Engineering, McGill University, Montreal, Quebec, Canada, H3A 2A7
Get access

Abstract

A 40-kW transferred arc plasma melter has been designed and constructed to test the potential of this type of system for the vitrification of high level nuclear waste. Present technology relies on joule or induction heaters which are limited in operating temperature and are characterized by large liquid holdup and long residence times. The use of a plasma melter will allow the production of higher melting glasses and glass ceramics which are more durable and leach resistant in underground storage. The use of a plasma greatly decreases residence times in the heater and may even reduce the loss of volatiles by control of the melting atmosphere and continuous removal of the product as a solid ingot. Standard borosilicate glass has been melted with continuous withdrawal of product in a series of commissioning runs.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 98: Symposium K – Plasma Processing and Synthesis of Materials II , 1987 , 417
Copyright
Copyright © Materials Research Society 1987

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Dixon, R.S. and Rosinger, E.L.J.,”Third Annual Report of the Canadian Nuclear Fuel Waste Management Program ” AECL-6821 1981.Google Scholar
2. Cameron, D.L.,”Materials research for the Canadian nuclear fuel waste management program”,The Scientific Basis for Nuclear Waste Management Topp, S.V. ed. Elsevier 1982 pp 741–751.Google Scholar
3. Burrill, K.A.,”Development of a batch process for immobilizing some CRNL radioactive wastes in glass “,AECL-7334 presented at the 2nd Annual Meeting of the Canadian Nuclear Society,Ottawa,June 1981.Google Scholar
4. Lefevre, J and Sugier, A.,”Nuclear Waste management in France” AECL-7334 presented at the 2nd Annual Meeting of the Canadian Nuclear Society,Ottawa,June, Moore ed. v-3 1983 pp 391–397.Google Scholar
5. Siemans, O.H., and Bonner, W.F.,”Design features of a full scale high-level waste vitrification system”, Proc.of the 24th Conference on Remote Systems Technology, pp 37–42, 1976.Google Scholar
6. Dierks, R.D.,”Design and performance of a 100 kg/h, direct calcine-fed electric -melter system for nuclear waste vitrification”, PNL-2387 UC-70 Nov.,1980 Google Scholar
7. Chishar, P.H, “Experimental joule-heated ceramic melter for converting radioactive waste to glass”, Proc.26th Conf.on Remote Systems Technology, pp 408–412,1978.Google Scholar
8. Haywood, P.J., and Ceccetto, E.V.,”Development of sphene-based glass-ceramics for Canadian waste disposal conditions”, The Scientific Basis of Nuclear Waste Management,Topp, S.V. ed.,Elsevier,1982, pp 991–99.Google Scholar
9. Nafziger, R.H. and Oden, L.L., Mater.Res.Soc.Symp.Proc. 1983, 15 (Sci.Basis Nucl.Waste Manage.v 6) 639–46.Google Scholar
10. Osaki, M.,et al,”Behavior of radionuclides during the smelting of noncombustible solid wastes”,Sci.Basis Nucl.Waste Manage.,Topp, S.V. ed., Elsevier,1982, pp 595–608.Google Scholar
11. Hiratake, S.,”Processing of nuclear wastes by plasma arc melting” presented at the Amelia island 2nd International Conf.on Pilot Plants. Sponsored by the VMD of the American Vacuum Society,Sept 1981.Google Scholar