Article contents
Cu(In,Ga)Se2 Prepared from Electrodeposited CuGaSe2/CuInSe2 Bilayer for Solar Cell Applications
Published online by Cambridge University Press: 01 February 2011
Abstract
We report the preparation of Cu(In,Ga)Se2 (CIGS) thin-films using the electrodeposited (ED) CuGaSe2 (CGS)/CuInSe2 (CIS) bilayers. CGS/CIS bilayers were prepared on soda-lime glass /Mo substrates to realize the controlled Ga/(Ga+In) ratios and smooth layers of CIGS thin-films. It was found that the composition and morphology of CGS films was highly dependent on the composition of the bath. Crack-free and morphological CGS thin-films were obtained by the addition of supporting electrolyte and brightener. For the morphology and the crystallization of the ED-CIGS films, the best electric charges of CGS and CIS films were 1.0 C and 6.0 C respectively and the films were annealed at 600 oC for 60 min. However, the interface of the ED-CGS/CIS film had some voids and interdiffusions of Ga and In did not take place by annealing. The CIGS solar cell using ED-CGS/CIS films as an absorber exhibited diode behavior.
- Type
- Research Article
- Information
- Copyright
- Copyright © Materials Research Society 2007
References
- 1
- Cited by