Hostname: page-component-586b7cd67f-t7fkt Total loading time: 0 Render date: 2024-11-24T20:48:15.340Z Has data issue: false hasContentIssue false
  • English
  • Français

Combinatorial synthesis of (Al,Ti)N thin films via pulsed laser deposition

Published online by Cambridge University Press:  26 February 2011

Clara Ji-Hyun Cho ,
Rosario A Gerhardt ,
V. Siva Kumar G. Kelekanjeri  and
Hideomi Koinuma
Clara Ji-Hyun Cho
Affiliation:
[email protected], United States
Rosario A Gerhardt
Affiliation:
[email protected]
V. Siva Kumar G. Kelekanjeri
Affiliation:
[email protected], Georgia Institute of Technology, United States
Hideomi Koinuma
Affiliation:
[email protected], Japan
Get access

Abstract

Aluminum nitride (AlN), a wide band gap semiconductor (Eg = 6.2eV), has potential applications in microelectronics due to its excellent insulating properties and compatibility with silicon [1,2]. More recently, the use of AlN thin films in high electron mobility transistors, light emitting diodes and UV sources is explored by altering the band gap of the material [3]. The present work describes the combinatorial synthesis of (Al,Ti)N thin films via pulsed laser deposition (PLD) technique to obtain desirable compositional spreads and corresponding variations in the electrical properties. Films of AlN, TiN and (Al,Ti)N were deposited on 6H-SiC (0001) substrates held at a temperature of 680°C. The surface quality of the films examined using an AFM revealed island growth of SiO2 and other growth patterns possibly related to substrate defects.

X-ray diffraction studies indicated that the growth of AlN and TiN films occurred with corresponding habit planes of (0002) and (111) parallel to the substrate surface. Compositional investigations conducted using energy dispersive spectroscopy (EDS) and x-ray photoelectron spectroscopy (XPS) showed systematic changes in the Al and Ti composition across the thickness of the compositional spread film. Cross-sectional analysis of (Al,Ti)N films conducted in a high-resolution transmission electron microscope revealed that the films were multi-layered. Several orders of magnitude decrease in the measured resistivity across a 15 mm length (Al,Ti)N film was noted corresponding to a systematic increase in the Ti content. Further optimization of deposition conditions is essential for producing thicker films.

Keywords

combinatorial synthesisfilmx-ray diffraction (XRD)
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 894: Symposium LL – Combinatorial Methods and Informatics in Materials Science , 2005 , 0894-LL02-07
Copyright
Copyright © Materials Research Society 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Tanase, M., Morosanu, C., Dumitru, V., Tugulea, L. and Tomozeiu, N., CAS Proceedings 1, 221–224 (1998).Google Scholar
2. Aardahl, C. L., Rogers, J.W. Jr, Yun, K. K., Ono, Y., Tweet, D.J. and Hsu, S.-T., Thin Solid Films 346, 174–180 (1999).Google Scholar
3. Razeghi, M. and Henini, M., Optoelectronic Devices: III-Nitrides, Elsevier Ltd, (2004).Google Scholar
4. Koichi, N., Ceramic Transactions 33, 115–124 (1993).Google Scholar
5. Binh, N. B., Westinghouse Electron. Sys. Group, 567–570 (1992).Google Scholar
6. Gerhardt, R., Packaging Materials Science MRS Proceedings 108, 101–106 (1988).Google Scholar
7. Godlewski, M. and Kozanecki, A., Handbook of Electroluminescent Materials, Institute of Physics Publishing, Bristol, UK, (2004).Google Scholar
8. Feenstra, R. M., Dong, Y., Lee, C. D. and Northrup, J. E., Journal of Vacuum Science and Technology B 23[3], 1174–1180 (2005).Google Scholar
9. Raghavan, S. and Redwing, J., Journal of Applied Physics 98[2], 023515/1–023515/8 (2005).Google Scholar
10. Taniyasu, Y., Kasu, M. and Kobayashi, N., Physica Status Solidi C: Conferences and Critical Reviews 0[1], b845–b849 (2002).Google Scholar
11. http://www.physandtech.net/3.htm.Google Scholar
12. Vispute, R. D., Narayan, J. and Budai, J. D., Thin Solid Films 299, 94–103 (1997).Google Scholar