Hostname: page-component-586b7cd67f-g8jcs Total loading time: 0 Render date: 2024-11-28T13:52:36.686Z Has data issue: false hasContentIssue false
  • English
  • Français

Carbon Nanotube Anodes for Lithium Ion Batteries

Published online by Cambridge University Press:  15 March 2011

Ryne P. Raffaelle ,
Thomas Gennett ,
Jeff Maranchi ,
Prashant Kumta ,
Aloysius F. Hepp ,
Michael J. Heben ,
Anne C. Dillon  and
Kim C. Jones
Ryne P. Raffaelle
Affiliation:
NanoPower Research Labs, Rochester Institute of Technology, Rochester, NY 14623
Thomas Gennett
Affiliation:
NanoPower Research Labs, Rochester Institute of Technology, Rochester, NY 14623
Jeff Maranchi
Affiliation:
Carnegie-Mellon University, 4309 Wean Hall, Pittsburgh, PA 15213
Prashant Kumta
Affiliation:
Carnegie-Mellon University, 4309 Wean Hall, Pittsburgh, PA 15213
Aloysius F. Hepp
Affiliation:
NASA Glenn Research Center, 12000 Brookpark Rd., Cleveland, OH 44135
Michael J. Heben
Affiliation:
National Renewable Energy Laboratory, 1617 Cole Blvd., Golden, CO 80401
Anne C. Dillon
Affiliation:
National Renewable Energy Laboratory, 1617 Cole Blvd., Golden, CO 80401
Kim C. Jones
Affiliation:
National Renewable Energy Laboratory, 1617 Cole Blvd., Golden, CO 80401
Get access

Abstract

Highly purified single-wall carbon nanotubes (SWCNT) were investigated for use as an anode material for thin film lithium ion batteries. The high purity nanotubes were obtained through chemical refinement of soot generated by pulsed laser ablation. The purity of the nanotubes was determined via thermogravimetric analysis, scanning electron microscopy, and transmission electron microscopy. The specific surface area and lithium capacity of the SWCNT's was compared to that of other conventional anode materials (i.e., carbon black, graphite, and multi-walled carbon nanotubes). The Brunauer, Emmett, and Teller (BET) technique based on nitrogen adsorption was used to measure the specific surface area of the various anode materials. The SWCNT's exhibited a specific surface area on the order of 915 m2/g, much higher than the other carbonaceous materials. Cyclic voltammetric behavior and the lithium-ion capacity of the materials were measured using a standard 3-electrode electrochemical cell. The cyclic voltammetry showed evidence of “staging” that was similar to other carbonaceous materials. The electrochemical discharge capacity of the purified single walled carbon nanotubes was in excess of 1300 mAh/g after 30 charge/discharge cycles when tested using a current density of 20μA/cm2.

Type
Article
Information
MRS Online Proceedings Library (OPL) , Volume 706: Symposium Z – Making Functional Materials with Nanotubes , 2001 , Z10.5.1
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Dahn, J.R., Zheng, T., Liu, Y., and Xue, J.S., Science, 270, 590 (1995).Google Scholar
2. Dresselhaus, M.S. and Dresselhaus, G., Adv. Phys. 30, 139 (1981).Google Scholar
3. Tarascon, J.M. and Armand, M., Nature, 414, 359 (2001).Google Scholar
4. Claye, A., Fischer, J., Huffman, C., Rinzler, A., and Smalley, R.E.. J. Electrochem. Soc., 147, 2845 (2000).Google Scholar
5. Liu, P., Hornyak, G.L., Dillon, A.C., Gennett, T., Heben, M.J., and Turner, J.A., J. Electrochemical Soc.; Proceedings of the International Symposium, 31, 9 (1999).Google Scholar
6. Dresselhaus, M.S., Dresselhaus, G., and Eklund, P.C., Science of the Fullerenes and Carbon Nanotubes, (Academic Press, 1996).Google Scholar
7. Dillon, A.C., Gennett, T., Jones, K. M., Alleman, J. L., Parilla, P. A., and Heben, M. J., Adv. Mater., 11, 1354 (1999).Google Scholar
8. Kavan, L., Rapta, P., Dunsch, L., Chem. Phys. Lett., 328, 363 (2000).Google Scholar
9. Chang, I.W., Brinson, B.E., Smalley, R.E., Margrave, J.L., and Hauge, R.H., J. Phys. Chem. B, 105, 1157 (2001).Google Scholar
10. Hamada, N., Sawada, S., Oshiyama, A., Phys. Rev. Lett., 68, 1579 (1992).Google Scholar
11. Dahn, J.R. and McKinnon, W.R., J. Electrochem. Soc., 131, 1823 (1984).Google Scholar
12. Dahn, J.R., Phys. Rev. B, 44, 9170 (1991).Google Scholar
13. Dahn, J.R., Sleigh, A.K., Shi, H., Way, B.M., Weydanz, W.J., Reimers, J.N., Zhong, Q., and Sacken, U. von, Lithium Batteries: New Materials, Developments and Perspectives, Ed. Pistoia, G., (Elsevier Science, 1994).Google Scholar