Article contents
Carbochlorination of Fly Ash in a Fused Salt Slurry Reactor
Published online by Cambridge University Press: 25 February 2011
Abstract
Carbochlorination of the metal oxides in fly ash by suspending the solid reactants in a NaCl-AlCl3 melt at 530–850°C and then sparging chlorine into the melt has been investigated. A mechanically agitated, semi-batch reactor was used to test the effects of temperature, oxide and carbon loading, salt composition and gas flow on the reaction rate. The process was modeled using the carbochlorination of pure alumina, the rate of which was found to be chemical reaction controlled at temperatures below about 650°C and gas-liquid mass transfer controlled at higher temperature. The carbochlorination rate of the mixed oxides in coal fly ash was also mass transfer controlled at higher temperatures when aluminum recoveries were less than about 50%. At higher aluminum recoveries, the overall rate was limited by the rate of ash dissolution into the melt.
- Type
- Research Article
- Information
- Copyright
- Copyright © Materials Research Society 1987
References
REFERENCES
- 2
- Cited by