Hostname: page-component-586b7cd67f-dsjbd Total loading time: 0 Render date: 2024-11-28T13:58:07.737Z Has data issue: false hasContentIssue false
  • English
  • Français

Alloying and selenization of Cu-In stacked layers evaporated onto large areas

Published online by Cambridge University Press:  21 March 2011

Raquel Caballero ,
Cecilia Guillén  and
Rocío Bayón
Raquel Caballero
Affiliation:
Departamento de Energías Renovables (CIEMAT) Avd. Complutense, 22, 28040, Madrid, SPAIN
Cecilia Guillén
Affiliation:
Departamento de Energías Renovables (CIEMAT) Avd. Complutense, 22, 28040, Madrid, SPAIN
Rocío Bayón
Affiliation:
Departamento de Energías Renovables (CIEMAT) Avd. Complutense, 22, 28040, Madrid, SPAIN
Get access

Abstract

In this work, Cu and In thin films, as precursors for CuInSe2 (CIS) formation, have been deposited on glass substrate up to 30 × 30 cm2 area using an electron beam evaporator in sequential processes. In order to obtain a similar global composition, three types of sequential processes of evaporation: A) Cu/In/Cu/In, B) Cu/In/Cu/In/Cu/In and C) In/Cu/In/Cu have been tested. As-grown thin films were studied at room temperature and after 120° C annealing. XRD analysis of these films showed mainly the CuIn2−x (0≤ × ≤ 1) phase at room temperature, and Cu11In9 after annealing at 120° C. After alloying, the films were selenized at temperature between 250° and 400° C in vacuum using elemental selenium vapour. XRD of the selenized thin films corresponding to In/Cu/In/Cu sequence and previously annealing at 120° C, showed the major presence of the polycrystalline chalcopyrite structure CuInSe2 with preferential orientation (112) plane at temperature as low as 250° C. From SEM studies and profilometer measurements a decrease in the mean roughness could be observed after annealing at 120° C. In contrast the resistivity of the films increased.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 668: Symposium H – II-IV Compound Semiconductor Photovoltaic Materials , 2001 , H8.2
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Contreras, M.A., Egaas, B., Ramanathan, K., Hiltner, J., Swartzlander, A., Hasoon, F. and Noufi, R., Progress in Photovoltaics 7, 311–316, (1999).Google Scholar
2. Coutts, T.J. and Meakin, J.D., Current Topics in Photovoltaics, Academic Press, (1985).Google Scholar
3. Schock, H.W. and Noufi, R., Progress in Photovoltaics 8, 151–160, (2000).Google Scholar
4. Birkmire, R.W., Solar Energy Materials and Solar Cells 65, 17–28, (2001).Google Scholar
5. Nakano, T., Suzuki, T., Ohnuki, N., Baba, S., Thin Solid Films 334, 192–195, (1998).Google Scholar
6. Sadigov, M.S., Özkan, M., Bacaksiz, E., Altunbas, M., Kopya, A.I., Journal of materials science 34, 4579–4584, (1999).Google Scholar
7. Guillén, C. and Herrero, J., J. Electrochemical Society vol. 143, No. 2, 493–498, 1996.Google Scholar
8. Guillén, C. and Herrero, J., J. Electrochemical Society vol 142, No. 6, 1834–1838, 1995.Google Scholar
9. Adurodija, F.O., Song, J., Kim, S.D., Kwon, S.H., Kim, S.K., Yoon, K.H., Ahn, B.T., Thin Solid Films 338, 13–19, (1999).Google Scholar
10. Basol, B. M., Thin Solid Films 361–362, 514–519, (2000).Google Scholar