Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by
Crossref.
Richert, Claudia
and
Huber, Norbert
2018.
Skeletonization, Geometrical Analysis, and Finite Element Modeling of Nanoporous Gold Based on 3D Tomography Data.
Metals,
Vol. 8,
Issue. 4,
p.
282.
Fu, Jintao
Corsi, John S.
Wang, Zeyu
Wei, Heng
and
Detsi, Eric
2018.
Integrated Metal–Air Battery and Selective Electrolytic Leaching Cell for the Preparation of Nanoporous Metals.
ACS Applied Nano Materials,
Vol. 1,
Issue. 8,
p.
4164.
Fu, Jintao
Deng, Ziling
Lee, Timothy
Corsi, John S.
Wang, Zeyu
Zhang, Dongyang
and
Detsi, Eric
2018.
pH-Controlled Dealloying Route to Hierarchical Bulk Nanoporous Zn Derived from Metastable Alloy for Hydrogen Generation by Hydrolysis of Zn in Neutral Water.
ACS Applied Energy Materials,
Vol. 1,
Issue. 7,
p.
3198.
Mokhtari, Morgane
Le Bourlot, Christophe
Adrien, Jérome
Bonnin, Anne
Wada, Takeshi
Duchet-Rumeau, Jannick
Kato, Hidemi
and
Maire, Eric
2018.
Microstructure characterization by X-ray tomography and EBSD of porous FeCr produced by liquid metal dealloying.
Materials Characterization,
Vol. 144,
Issue. ,
p.
166.
Ruestes, Carlos J.
Schwen, Daniel
Millán, Emmanuel N.
Aparicio, Emiliano
and
Bringa, Eduardo M.
2018.
Mechanical properties of Au foams under nanoindentation.
Computational Materials Science,
Vol. 147,
Issue. ,
p.
154.
Weissmüller, Jörg
and
Sieradzki, Karl
2018.
Dealloyed nanoporous materials with interface-controlled behavior.
MRS Bulletin,
Vol. 43,
Issue. 1,
p.
14.
Huber, Norbert
2018.
Connections Between Topology and Macroscopic Mechanical Properties of Three-Dimensional Open-Pore Materials.
Frontiers in Materials,
Vol. 5,
Issue. ,
Beets, Nathan
and
Farkas, Diana
2018.
Mechanical Response of Au Foams of Varying Porosity from Atomistic Simulations.
JOM,
Vol. 70,
Issue. 10,
p.
2185.
Jin, Hai-Jun
Weissmüller, Jörg
and
Farkas, Diana
2018.
Mechanical response of nanoporous metals: A story of size, surface stress, and severed struts.
MRS Bulletin,
Vol. 43,
Issue. 1,
p.
35.
X. Gan, Yong
Zhang, Yongping
and
B. Gan, Jeremy
2018.
Nanoporous metals processed by dealloying and their applications.
AIMS Materials Science,
Vol. 5,
Issue. 6,
p.
1141.
Corsi, John S.
Fu, Jintao
Wang, Zeyu
Lee, Timothy
Ng, Alexander K.
and
Detsi, Eric
2019.
Hierarchical Bulk Nanoporous Aluminum for On-Site Generation of Hydrogen by Hydrolysis in Pure Water and Combustion of Solid Fuels.
ACS Sustainable Chemistry & Engineering,
Vol. 7,
Issue. 13,
p.
11194.
Champion, Yannick
Laurent-Brocq, Mathilde
Lhuissier, Pierre
Charlot, Frédéric
Moreira Jorge Junior, Alberto
and
Barsuk, Daria
2019.
Understanding the Interdependence of Penetration Depth and Deformation on Nanoindentation of Nanoporous Silver.
Metals,
Vol. 9,
Issue. 12,
p.
1346.
Larsson, Emanuel
Gürsoy, Doğa
De Carlo, Francesco
Lilleodden, Erica
Storm, Malte
Wilde, Fabian
Hu, Kaixiong
Müller, Martin
and
Greving, Imke
2019.
Nanoporous gold: a hierarchical and multiscale 3D test pattern for characterizing X-ray nano-tomography systems.
Journal of Synchrotron Radiation,
Vol. 26,
Issue. 1,
p.
194.
Gnegel, Stephan
Li, Jie
Mameka, Nadiia
Huber, Norbert
and
Düster, Alexander
2019.
Numerical Investigation of Polymer Coated Nanoporous Gold.
Materials,
Vol. 12,
Issue. 13,
p.
2178.
McDevitt, Kyle M.
Thorson, Todd J.
Botvinick, Elliot L.
Mumm, Daniel R.
and
Mohraz, Ali
2019.
Microstructural characteristics of bijel-templated porous materials.
Materialia,
Vol. 7,
Issue. ,
p.
100393.
Wang, Dong
and
Schaaf, Peter
2019.
Synthesis and characterization of size controlled bimetallic nanosponges.
Physical Sciences Reviews,
Vol. 4,
Issue. 6,
Li, Yong
Dinh Ngô, Bao-Nam
Markmann, Jürgen
and
Weissmüller, Jörg
2019.
Topology evolution during coarsening of nanoscale metal network structures.
Physical Review Materials,
Vol. 3,
Issue. 7,
Shao, Jun-Chao
and
Jin, Hai-Jun
2020.
From liquid metal dealloying to liquid metal expulsion.
Journal of Materials Science,
Vol. 55,
Issue. 19,
p.
8337.
Odermatt, A.
Richert, C.
and
Huber, N.
2020.
Prediction of elastic-plastic deformation of nanoporous metals by FEM beam modeling: A bottom-up approach from ligaments to real microstructures.
Materials Science and Engineering: A,
Vol. 791,
Issue. ,
p.
139700.
Flenner, Silja
Storm, Malte
Kubec, Adam
Longo, Elena
Döring, Florian
Pelt, Daniël M.
David, Christian
Müller, Martin
and
Greving, Imke
2020.
Pushing the temporal resolution in absorption and Zernike phase contrast nanotomography: enabling fast in situ experiments.
Journal of Synchrotron Radiation,
Vol. 27,
Issue. 5,
p.
1339.