Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by
Crossref.
Xu, Changxue
Chai, Wenxuan
Huang, Yong
and
Markwald, Roger R.
2012.
Scaffold‐free inkjet printing of three‐dimensional zigzag cellular tubes.
Biotechnology and Bioengineering,
Vol. 109,
Issue. 12,
p.
3152.
Yan, Jingyuan
Huang, Yong
and
Chrisey, Douglas B
2012.
Laser-assisted printing of alginate long tubes and annular constructs.
Biofabrication,
Vol. 5,
Issue. 1,
p.
015002.
Molaei, Roya
Bayati, Mohammad Reza
and
Narayan, Jagdish
2012.
Thin film epitaxy and near bulk semiconductor to metal transition in VO2/NiO/YSZ/Si(001) heterostructures.
Journal of Materials Research,
Vol. 27,
Issue. 24,
p.
3103.
Yan, Jingyuan
Huang, Yong
Xu, Changxue
and
Chrisey, Douglas B.
2012.
Effects of fluid properties and laser fluence on jet formation during laser direct writing of glycerol solution.
Journal of Applied Physics,
Vol. 112,
Issue. 8,
Bayati, M. R.
Molaei, R.
Narayan, R. J.
Narayan, J.
Zhou, H.
and
Pennycook, S. J.
2012.
Domain epitaxy in TiO2/α-Al2O3 thin film heterostructures with Ti2O3 transient layer.
Applied Physics Letters,
Vol. 100,
Issue. 25,
Bayati, M. R.
Gupta, P.
Molaei, R.
Narayan, R. J.
and
Narayan, J.
2012.
Phase Tuning, Thin Film Epitaxy, Interfacial Modeling, and Properties of YSZ-Buffered TiO2 on Si(001) Substrate.
Crystal Growth & Design,
Vol. 12,
Issue. 9,
p.
4535.
Xu, Changxue
Christensen, Kyle
Zhang, Zhengyi
Huang, Yong
Fu, Jianzhong
and
Markwald, Roger R.
2013.
Predictive compensation-enabled horizontal inkjet printing of alginate tubular constructs.
Manufacturing Letters,
Vol. 1,
Issue. 1,
p.
28.
Molaei, R.
Bayati, M. R.
Alipour, H. M.
and
Narayan, J.
2013.
Controlled epitaxial integration of polar ZnO(0001) with Si(001).
Applied Physics Letters,
Vol. 102,
Issue. 10,
Ringeisen, Bradley R.
Pirlo, Russell K.
Wu, Peter K.
Boland, Thomas
Huang, Yong
Sun, Wei
Hamid, Qudus
and
Chrisey, Douglas B.
2013.
Cell and organ printing turns 15: Diverse research to commercial transitions.
MRS Bulletin,
Vol. 38,
Issue. 10,
p.
834.
Bayati, M. R.
Alipour, H. M.
Joshi, S.
Molaei, R.
Narayan, R. J.
Narayan, J.
and
Misture, S. T.
2013.
Thin-Film Epitaxy and Enhancement of Photocatalytic Activity of Anatase/Zirconia Heterostructures by Nanosecond Excimer Laser Treatment.
The Journal of Physical Chemistry C,
Vol. 117,
Issue. 14,
p.
7138.
Xu, Changxue
Zhang, Zhengyi
Christensen, Kyle
Huang, Yong
Fu, Jianzhong
and
Markwald, Roger R.
2014.
Freeform Vertical and Horizontal Fabrication of Alginate-Based Vascular-Like Tubular Constructs Using Inkjetting.
Journal of Manufacturing Science and Engineering,
Vol. 136,
Issue. 6,
Gudapati, Hemanth
Yan, Jingyuan
Huang, Yong
and
Chrisey, Douglas B
2014.
Alginate gelation-induced cell death during laser-assisted cell printing.
Biofabrication,
Vol. 6,
Issue. 3,
p.
035022.
Matei, Andreea
Constantinescu, Catalin
Ion, Valentin
Mitu, Bogdana
Ionita, Iulian
Dinescu, Maria
Vasiliu, Cristina
and
Emandi, Ana
2014.
Ferrocene, an old molecule with a bright future: Thin films grown by matrix-assisted pulsed laser evaporation for nonlinear optical applications.
Journal of Organometallic Chemistry,
Vol. 751,
Issue. ,
p.
638.
Visan, A.
Grossin, D.
Stefan, N.
Duta, L.
Miroiu, F.M.
Stan, G.E.
Sopronyi, M.
Luculescu, C.
Freche, M.
Marsan, O.
Charvillat, C.
Ciuca, S.
and
Mihailescu, I.N.
2014.
Biomimetic nanocrystalline apatite coatings synthesized by Matrix Assisted Pulsed Laser Evaporation for medical applications.
Materials Science and Engineering: B,
Vol. 181,
Issue. ,
p.
56.
Holban, Alina Maria
Grumezescu, Valentina
Grumezescu, Alexandru Mihai
Vasile, Bogdan Ştefan
Truşcă, Roxana
Cristescu, Rodica
Socol, Gabriel
and
Iordache, Florin
2014.
Antimicrobial nanospheres thin coatings prepared by advanced pulsed laser technique.
Beilstein Journal of Nanotechnology,
Vol. 5,
Issue. ,
p.
872.
Dias, A D
Unser, A M
Xie, Y
Chrisey, D B
and
Corr, D T
2014.
Generating size-controlled embryoid bodies using laser direct-write.
Biofabrication,
Vol. 6,
Issue. 2,
p.
025007.
Sklare, S.C.
Phamduy, Theresa B.
Curly, J. Lowry
Huang, Yong
and
Chrisey, Douglas B.
2015.
3D Bioprinting and Nanotechnology in Tissue Engineering and Regenerative Medicine.
p.
79.
Pereira, Rúben F.
and
Bártolo, Paulo J.
2015.
3D Photo-Fabrication for Tissue Engineering and Drug Delivery.
Engineering,
Vol. 1,
Issue. 1,
p.
090.
Xiong, Ruitong
Zhang, Zhengyi
Shen, Jianxin
Lin, Yafu
Huang, Yong
and
Chrisey, Douglas B.
2015.
Bubble Formation Modeling During Laser Direct Writing of Glycerol Solutions.
Journal of Micro and Nano-Manufacturing,
Vol. 3,
Issue. 1,
Bert Huis in 't Veld
Overmeyer, Ludger
Schmidt, Michael
Wegener, Konrad
Malshe, Ajay
and
Bartolo, Paulo
2015.
Micro additive manufacturing using ultra short laser pulses.
CIRP Annals,
Vol. 64,
Issue. 2,
p.
701.