Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by
Crossref.
Woesz, A.
Stampfl, J.
and
Fratzl, P.
2004.
Cellular Solids beyond the Apparent Density – an Experimental Assessment of Mechanical Properties.
Advanced Engineering Materials,
Vol. 6,
Issue. 3,
p.
134.
Williams, Martha K.
Weiser, Erik S.
Fesmire, James E.
Grimsley, Brian W.
Smith, Trent M.
Brenner, James R.
and
Nelson, Gordon L.
2005.
Effects of cell structure and density on the properties of high performance polyimide foams.
Polymers for Advanced Technologies,
Vol. 16,
Issue. 2-3,
p.
167.
Zeschky, Jürgen
Lo, Jason
Höfner, Thomas
and
Greil, Peter
2005.
Mg alloy infiltrated Si–O–C ceramic foams.
Materials Science and Engineering: A,
Vol. 403,
Issue. 1-2,
p.
215.
Ding, Shuqiang
Zeng, Yu-Ping
and
Jiang, Dongliang
2006.
Thermal shock resistance of in situ reaction bonded porous silicon carbide ceramics.
Materials Science and Engineering: A,
Vol. 425,
Issue. 1-2,
p.
326.
Zhang, Yin
Yokogawa, Yoshiyuki
and
Kameyama, Tetsuya
2006.
Preparation of Bimodal Porous Apatite Ceramics through Slip Casting Using Fine Hydroxyapatite Powders.
Key Engineering Materials,
Vol. 317-318,
Issue. ,
p.
723.
Ding, Shuqiang
Zhu, Sumin
Zeng, Yuping
and
Jiang, Dongliang
2006.
Effect of Y2O3 addition on the properties of reaction-bonded porous SiC ceramics.
Ceramics International,
Vol. 32,
Issue. 4,
p.
461.
Kaur, Sumanjeet
Ajayan, Pulickel M.
and
Kane, Ravi S.
2006.
Design and Characterization of Three-Dimensional Carbon Nanotube Foams.
The Journal of Physical Chemistry B,
Vol. 110,
Issue. 42,
p.
21377.
Conde, Y.
Despois, J.‐F.
Goodall, R.
Marmottant, A.
Salvo, L.
San Marchi, C.
and
Mortensen, A.
2006.
Replication Processing of Highly Porous Materials.
Advanced Engineering Materials,
Vol. 8,
Issue. 9,
p.
795.
Colombo, Paolo
2006.
Conventional and novel processing methods for cellular ceramics.
Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences,
Vol. 364,
Issue. 1838,
p.
109.
Kucheyev, S. O.
Baumann, T. F.
Cox, C. A.
Wang, Y. M.
Satcher, J. H.
Hamza, A. V.
and
Bradby, J. E.
2006.
Nanoengineering mechanically robust aerogels via control of foam morphology.
Applied Physics Letters,
Vol. 89,
Issue. 4,
Ding, Shuqiang
Zeng, Yu-Ping
and
Jiang, Dongliang
2007.
Thermal shock behaviour of mullite-bonded porous silicon carbide ceramics with yttria addition.
Journal of Physics D: Applied Physics,
Vol. 40,
Issue. 7,
p.
2138.
Fratzl, Peter
and
Weinkamer, Richard
2007.
Nature’s hierarchical materials.
Progress in Materials Science,
Vol. 52,
Issue. 8,
p.
1263.
Zoldesi, C.I.
Steegstra, P.
and
Imhof, A.
2007.
Encapsulation of emulsion droplets by organo–silica shells.
Journal of Colloid and Interface Science,
Vol. 308,
Issue. 1,
p.
121.
Zhang, Yin
Yokogawa, Yoshiyuki
and
Kameyama, Tetsuya
2007.
Advanced Mechanical Properties of Porous Hydroxyapatite Ceramics Prepared Using Hydroxyapatite Slip and its Slurry Synthesis.
Key Engineering Materials,
Vol. 361-363,
Issue. ,
p.
151.
Maire, Eric
Colombo, Paolo
Adrien, Jerome
Babout, Laurent
and
Biasetto, Lisa
2007.
Characterization of the morphology of cellular ceramics by 3D image processing of X-ray tomography.
Journal of the European Ceramic Society,
Vol. 27,
Issue. 4,
p.
1973.
Deville, Sylvain
Saiz, Eduardo
and
Tomsia, Antoni P.
2007.
Ice-templated porous alumina structures.
Acta Materialia,
Vol. 55,
Issue. 6,
p.
1965.
Ding, Shuqiang
Zhu, Sumin
Zeng, Yu-Ping
and
Jiang, Dongliang
2007.
Fabrication of mullite-bonded porous silicon carbide ceramics by in situ reaction bonding.
Journal of the European Ceramic Society,
Vol. 27,
Issue. 4,
p.
2095.
Zhu, Xin Wen
Sakka, Yoshio
Tan, Shou Hong
and
Jiang, Dong Liang
2007.
Bend Deformation Behavior of Silicon Carbide Reticulated Porous Ceramics.
Materials Science Forum,
Vol. 534-536,
Issue. ,
p.
941.
Ding, Shu Qiang
Jiang, Dong Liang
and
Zhu, Su Min
2007.
In Situ Reaction Synthesis of Porous Silica-Matrix Ceramics.
Key Engineering Materials,
Vol. 280-283,
Issue. ,
p.
1143.
Deville, S.
2008.
Freeze‐Casting of Porous Ceramics: A Review of Current Achievements and Issues.
Advanced Engineering Materials,
Vol. 10,
Issue. 3,
p.
155.