Hostname: page-component-78c5997874-ndw9j Total loading time: 0 Render date: 2024-11-03T08:25:20.478Z Has data issue: false hasContentIssue false
  • English
  • Français

Aluminum Foams: On the Road to Real Applications

Published online by Cambridge University Press:  31 January 2011

John Banhart
Get access

Abstract

Metallic foams have become an attractive research field both from a scientific viewpoint and the prospect of industrial applications. Various methods for making such foams are available. Some techniques start from specially prepared molten metals with adjusted viscosities. Such melts can be foamed by injecting gases or by adding gas-releasing blowing agents that decompose in situ, causing the formation of bubbles. Another method is to prepare supersaturated metal–gas systems under high pressure and initiate bubble formation by pressure and temperature control. Yet a further class of techniques begins with solid precursors containing a blowing agent. These can be prepared by mixing metal powders with a blowing agent, compacting the mix, and then foaming the compacted mix by melting. Alternatively, casting routes can be used to make such precursors. The unique properties of foams offer promise in a variety of applications ranging from lightweight construction and impact-energy absorption to various types of acoustic damping and thermal insulation.

Keywords

alloyscastingcellular solidsindustrial applicationsmetalsmechanical propertiespowder metallurgystructural materials
Type
Research Article
Information
MRS Bulletin , Volume 28 , Issue 4: Cellular Solids , April 2003 , pp. 290 - 295
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Banhart, J., Prog. Mater. Sci. 46 (2001) p. 559.Google Scholar
2.Banhart, J., Ashby, M.F., and Fleck, N.A., eds., Metal Foams and Porous Metal Structures (MITVerlag, Bremen, 1999).Google Scholar
3.Banhart, J., Ashby, M.F., and Fleck, N.A., eds., Cellular Metals and Metal Foaming Technology (MIT-Verlag, Bremen, 2001).Google Scholar
4.Degischer, H.P. and Kriszt, B., eds., Handbook of Cellular Metals (WILEY-VCH, Weinheim, 2002).CrossRefGoogle Scholar
5. Metal foam information Web site, www.metalfoam.net (accessed December 2002).Google Scholar
6.Harte, A.-M. and Nichol, S., in Cellular Metals and Metal Foaming Technology, edited by Banhart, J., Ashby, M.F., and Fleck, N.A. (MIT-Verlag, Bremen, 2001) p. 49.Google Scholar
7.Kenny, L.D., Mater. Sci. Forum 217–222 (1996) p. 1883.Google Scholar
8.Leitlmeier, D., Degischer, H.P., and Flankl, H.J., Adv. Eng. Mater. 4 (10) (2002) p. 735.3.0.CO;2-Y>CrossRefGoogle Scholar
9.Miyoshi, T., in Cellular Metals and Metal Foaming Technology, edited by Banhart, J., Ashby, M.F., and Fleck, N.A. (MIT-Verlag, Bremen, 2001) p. 125.Google Scholar
10.Shapovalov, V.L., in Porous and Cellular Materials for Structural Applications, edited by Schwartz, D.S., Shih, D.S., Evans, A.G., and Wadley, H.N.G. (Mater Res. Soc. Symp. Proc. 521, Warrendale, PA, 1998) p. 281.Google Scholar
11.Hyun, S.K. and Nakajima, H., Adv. Eng. Mater. 4 (10) (2002) p. 741.3.0.CO;2-9>CrossRefGoogle Scholar
12.Baumgärtner, F., Duarte, I., and Banhart, J., Adv. Eng. Mater. 2 (2000) p. 168.3.0.CO;2-O>CrossRefGoogle Scholar
13.Baumeister, J., in Sandwich Construction 5, Vol. I, edited by Meyer-Piening, H.R. and Zenkert, D. (EMAS, Solihull, U.K., 2000) p. 339.Google Scholar
14.Stanzick, H., Wichmann, M., Weise, J., Helfen, L., Baumbach, T., and Banhart, J., Adv. Eng. Mater. 4 (10) (2002) p. 814.Google Scholar
15.Melzer, A., Banhart, J., Baumeister, J., and Weber, M., German Patent No. 19813176 (August 24, 2000).Google Scholar
16.Gergely, V. and Clyne, T.W., Adv. Eng. Mater. 2 (2000) p. 175.3.0.CO;2-W>CrossRefGoogle Scholar
17.Ashby, M.F., Evans, A.G., Fleck, N.A., Gibson, L.J., Hutchinson, J.W., and Wadley, H.N.G., Metal Foams: A Design Guide (Butterworth-Heinemann, Boston, 2000).Google Scholar
18.Seeliger, W., in Cellular Metals and Metal Foaming Technology, edited by Banhart, J., Ashby, M.F., and Fleck, N.A. (MIT-Verlag, Bremen, 2001) pp. 5, 29.Google Scholar