Hostname: page-component-cd9895bd7-mkpzs Total loading time: 0 Render date: 2024-12-25T03:32:57.553Z Has data issue: false hasContentIssue false
  • English
  • Français

Thermal-Barrier Coatings for Advanced Gas-Turbine Engines

Published online by Cambridge University Press:  31 January 2011

Dongming Zhu  and
Robert A. Miller
Get access

Extract

Ceramic thermal-barrier coatings (TBCs) have received increasing attention for gasturbine engine applications. The advantages of using TBCs include increased fuel efficiency by allowing higher gas temperatures and improved durability and reliability from lower component temperatures. As illustrated in Figure 1, TBCs can provide effective heat insulation to engine components, thus allowing higher operating temperatures and reduced cooling requirements. Atypical two-layer TBC system consists of a porous ZrO2-Y2O3 ceramic top coat and an oxidation-resistant metallic bond coat. These TBC systems can be applied to the metal substrate either by plasma spray or by electron-beam physical vapor deposition (EB-PVD) techniques.

Type
Research Article
Information
MRS Bulletin , Volume 25 , Issue 7: Thermal Spray Coatings , July 2000 , pp. 43 - 47
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Firestone, R.F., Logan, W.R., and Adams, J.W., Creep of Plasma Sprayed Zirconia, NASA CR-167868 (NASA Lewis Research Center, Cleveland, OH, 1982).Google Scholar
2.Eaton, H.E. and Novak, R.C., Surf. Coat. Technol. 32 (1987) p. 227.CrossRefGoogle Scholar
3.Meier, S.M., Nissley, D.M., and Sheffler, K.D., Thermal Barrier Coating Life Prediction Model Development: Phase II-Final Report, NASA CR-182230 (NASA Lewis Research Center, Cleveland, OH, 1991).CrossRefGoogle Scholar
4.Eaton, H.E., Linsey, J.R., and Dinwiddie, R.B., in Thermal Conductivity, vol. 22, edited by Tong, T.W. (Technomic, Lancaster, PA, 1994) p. 289.Google Scholar
5.Goedjen, J.G., Brindley, W.J., and Miller, R.A., in Advances in Thermal Spray Science and Technology, edited by Berndt, C.C. and Sampath, S. (ASM International, Materials Park, OH, 1995) p. 73.Google Scholar
6.Zhu, D. and Miller, R.A., Surf. Coat. Technol. 94–95 (1997) p. 94.CrossRefGoogle Scholar
7.Zhu, D. and Miller, R.A., Surf. Coat. Technol. 108–109 (1998) p. 114.CrossRefGoogle Scholar
8.Zhu, D. and Miller, R.A., J. Mater. Res. 14 (1999) p. 146.CrossRefGoogle Scholar
9.Zhu, D. and Miller, R.A., “Thermophysical and Thermomechanical Properties of Thermal-Barrier Coating Systems,” Ceram. Eng. Sci. Proc. 21 (2000) in press.Google Scholar
10.Zhu, D. and Miller, R.A., Thermal Conductivity and Elastic Modulus Evolution of Thermal Barrier Coatings Under High Heat Flux Conditions, NASATM-209069 (NASA Glenn Research Center, Cleveland, OH, 1999).Google Scholar
11.Zhu, D. and Miller, R.A., Evaluation of Oxidation Damage in Thermal Barrier Coatings, NASA TM-107360 (NASA Lewis Research Center, Cleveland, OH, 1996).Google Scholar
12.Zhu, D. and Miller, R.A., Thermal Barrier Coatings for Advanced Gas Turbine and Diesel Engines, NASATM-209453 (NASAGlenn Research Center, Cleveland, OH, 1999).Google Scholar
13.Zhu, D. and Miller, R.A.Mater. Sci. Eng., A 245 (1998) p. 212.CrossRefGoogle Scholar