Hostname: page-component-745bb68f8f-lrblm Total loading time: 0 Render date: 2025-01-15T06:10:20.977Z Has data issue: false hasContentIssue false
  • English
  • Français

Silicon-on-lnsulator Technology: Past Achievements and Future Prospects

Published online by Cambridge University Press:  29 November 2013

Jean-Pierre Colinge
Get access

Extract

In silicon-on-insulator (SOI) technology, devices are dielectrically insulated from one another—usually by silicon dioxide. Unlike in conventional silicon devices, there is no direct contact between a transistor and the silicon substrate. The advantages of this type of isolation are many: reduced parasitic capacitances and reduced crosstalk between devices, improved current drive, subthreshold characteristics, and current gain. Silicon-on-insulator devices have been and are being used in several niche-market applications such as hightemperature and radiation-hard integrated circuits. However most importantly, SOI technology seems perfectly adapted to the needs of low-voltage, low-power (LVLP) electronic circuits. Because of the growing market for portable systems, LVLP technology is bound to soon become one of the drivers of the microelectronics industry, and SOI is likely to be part of it. Moreover major companies such as IBM, Sharp, Motorola, and Peregrine have announced upcoming lowpower and high-frequency lines of SOI products. The goal of this article is to introduce the reader to the basics of SOI device physics and the integrated-circuit applications of SOI.

Type
Siucon-on-Insulator Technology
Information
MRS Bulletin , Volume 23 , Issue 12 , December 1998 , pp. 16 - 19
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.http://www.edtn.com/news/augll/081198tnews2.htmlGoogle Scholar
2.Ipri, A.C., Appl. Solid State Sci., Suppl. 2, Silicon Integrated Circuits, Part A, edited by Kahng, D. (Academic Press, 1981) p. 253.CrossRefGoogle Scholar
3.Colinge, J-P., Silicon-on-lnsulator Technology: Materials to VLSI, 2nd ed. (Kluwer Academic Publishers, Boston, Dordrecht, London, 1997).CrossRefGoogle Scholar
4.Koh, Y.H., Oh, M.R., Lee, J.W., Yang, J.W., Lee, W.C, Park, C.K., Park, J.B., Heo, Y.C., Rho, K.M., Lee, B.C., Chung, M.J., Huh, M., Kim, H.S., Choi, K.S., Lee, W.C., Lee, J.K., Ahn, K.H., Park, K.W.Yang, J.Y., Kim, H.K., Lee, D.H., and Hwang, I.S.IEDM Tech. Digest (1997) p. 579.Google Scholar
5.Allen, L.P., Smick, T.H., and Ryding, G., J. Electron. Mater. 25-1 (1996) p. 93.CrossRefGoogle Scholar
6.Sturm, J.C., Tokunaga, K., and Colinge, J.P., IEEE Electron. Device Lett. 9–9 (1988) p. 460.CrossRefGoogle Scholar
7.Huang, W.M., Papworth, K., Racanelli, M., John, J.P., Foerstner, J., Shin, H.C., Park, H., Hwang, B.Y., Wetteroth, T., Hong, S., Shin, H., Wilson, S., and Cheng, S., IEDM Tech. Digest (1995) p. 59.Google Scholar
8.Douseki, T., Shigematsu, S., Tanabe, Y., Harada, M., Inokawa, H., and Tsuchiya, T., IEEE Tech. Digest (1996) p. 84.Google Scholar
9.Ino, M., Sawada, H., Nishimura, K., Urano, M., Suto, H., Date, S., Ishiara, T., Takeda, T., Kado, Y., Inokawa, H., Tsuchiya, T., Sakakibara, Y., Arita, Y., Izumi, K., Takeya, K., and Sakai, T., IEEE Tech. Digest (1996) p. 86.Google Scholar
10.Fuse, T., Oowaki, Y., Terauchi, M., Watanabe, S., Yoshimi, M., Ohuchi, K., and Matsunaga, J.IEEE Tech. Digest (1996) p. 88.Google Scholar
11.Adan, A.O., Naka, T., Kaneko, S., Urabe, D., Higashi, K., and Kasigawa, A., in Proc. IEEE Int. SOI Conf. (Institute of Electronic and Electrical Engineering, 1996) p. 116.Google Scholar
12.Fuse, T., Oowaki, Y. , Yamada, Y., Kamoshida, M., Ohta, M., Shino, T., Kawanaka, S., Terauchi, M., Yoshida, T., Matsubara, G., Oshioka, S., Watanabe, S., Yoshimi, M., Ohuchi, K., and Manabe, S., IEEE Tech. Digest (1996) p. 286.Google Scholar
13.Ohtomo, Y., Yasuda, S., Nogawa, M., Inoue, J., Yamakoshi, K., Sawada, H., Ino, M., Hino, S., Sato, Y., Takei, Y., Watanabe, T., and Takeya, K., IEEE Tech. Digest (1997) p. 154.Google Scholar
14.Hu, Y., Teng, C., Houston, T.W., Joyner, K., and Aton, T.J., Tech. Digest Symp. VLSI Technol (1996) p. 128.Google Scholar
15.Shahidi, G.G., Ning, T.H., Chappell, T.I., Comfort, J.H., Chappell, B. A., Franch, R., Anderson, C.J., Cook, P.W., Schuster, S.E., Rosenfield, M.G., Polcari, M.R., Dennard, R.H., and Davari, B., IEDM Tech. Digest (1993) p. 813.Google Scholar
16.Eimori, T., Oashi, T., Kimura, H., Yamaguchi, Y., Iwamatsu, T., Tsuruda, T., Suma, K., Hidaka, H., Inoue, Y., Nishimura, T., Satoh, S., and Miyoshi, M., IEDM Tech. Digest (1993) p. 45.Google Scholar
17.Kim, H-S., Lee, S-B., Choi, D-U., Shim, J-H., Lee, K-C., Lee, K-P., Kim, K-N., and Park, J-W., Tech. Digest Symp. VLSI Technol. (1995) p. 143.Google Scholar
18.Oashi, T., Eimori, T., Morishita, F., Iwamatsu, T., Yamaguchi, Y., Okuda, F., Shimomura, K., Shimano, H., Sakashita, S., Arimoto, K., Inoue, Y., Komori, S., Inuishi, M., Nishimura, T., and Miyoshi, H., IEDM Tech. Digest (1996) p. 609.Google Scholar
19.Shimomura, K., Shimano, H., Okuda, F., Sakashita, N., Oashi, T., Yamaguchi, Y., Eimori, T., Inuishi, M., Arimoto, K., Maegawa, S., Inoue, Y., Nishimura, T., Komori, S., Kyuma, K., Yasuoka, A., and Abe, H., ZEEE Tech. Digest (1997) p. 68.Google Scholar
20.http://www.mtcsemi.com/html/technology.htmlGoogle Scholar
21.http://www.ssec.honeywell.com/Google Scholar
22.Eggermont, J.P., Flandre, D., and Colinge, J-P., Trans. 3rd Int. High Temp. Electron. Conf. (HiTEC) 1 (1996) p. X.3.Google Scholar
23.Eisenhut, C. and Klein, J.W., in Proc. IEEE Int. SOI Conf. (Institute of Electronic and Electrical Engineering, 1997) p. 110.Google Scholar
24.Viviani, A., Flandre, D., and Jespers, P., in Proc. IEEE Int. SOI Conf. (Institute of Electronic and Electrical Engineering, (1996) p. 110.Google Scholar
25.Dessard, V., Baldwin, D., Demeus, L., Gentinne, B., and Flandre, D., in Proc. IEEE Int. SOI Conf. (Institute of Electronic and Electrical Engineering, (1996) p. 24.Google Scholar