Hostname: page-component-586b7cd67f-l7hp2 Total loading time: 0 Render date: 2024-11-24T12:57:37.849Z Has data issue: false hasContentIssue false
  • English
  • Français

Vanadium Oxide Based RRAM Device

Published online by Cambridge University Press:  21 June 2017

Zhenni Wan ,
Robert B. Darling  and
M. P. Anantram
Zhenni Wan*
Affiliation:
Department of Electrical Engineering, University of Washington, Seattle, WA, 98105, USA.
Robert B. Darling
Affiliation:
Department of Electrical Engineering, University of Washington, Seattle, WA, 98105, USA.
M. P. Anantram
Affiliation:
Department of Electrical Engineering, University of Washington, Seattle, WA, 98105, USA.
*
*(Email: [email protected])
Get access

Abstract

Forming-free bipolar resistive switching characteristics in a Vanadium oxide based sandwich structure is observed for the first time. The bottom conducting layer is the common ground electrode for all devices. The top conducting layer acts as an active element with an additional Cr/Al/Cr electrode patterned on its top for making contact. Different from the typical metal/transition metal oxide/metal sandwich structure based resistive memories, our device exhibits a low resistance state (LRS) in its virgin state, and can be switched to a high resistance state (HRS) when a positive bias of +2.5V is applied to the top electrode. Following this, the device can be reset to a LRS when a negative bias of approximately 2.5V is applied. A significant decrease of switching voltages is observed when the diameter of the top contact decreases, indicating an electric field enhanced switching mechanism. Simulation using TCAD confirms that electric field beneath the top metal contact increases due to fringing. The results suggest future applications in low power integrated non-volatile memories.

Keywords

memoryoxidesimulation
Type
Articles
Information
MRS Advances , Volume 2 , Issue 52: Electronic Devices and Materials , 2017 , pp. 3019 - 3024
Copyright
Copyright © Materials Research Society 2017 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Wong, H.-S.P., et al. ., Metal–oxide RRAM. Proceedings of the IEEE, 2012. 100(6): p. 1951–1970.Google Scholar
Semenov, A.E., Borodina, I.N., and Garofalini, S.H. In Situ Deposition and Ultrahigh Vacuum STM/AFM Study of V 2 O 5 / Li3 PO 4 Interface in a Rechargeable Lithium-Ion Battery. Journal of The Electrochemical Society, 2001. 148(11): p. A1239-A1246.Google Scholar
Cheah, Y.L., Aravindan, V., and Madhavi, S., Electrochemical Lithium Insertion Behavior of Combustion Synthesized V2O5 Cathodes for Lithium-Ion Batteries. Journal of The Electrochemical Society, 2012. 159(3): p. A273-A280.Google Scholar
Wan, Z., Darling, R.B., and Anantram, M., Programmable diode/resistor-like behavior of nanostructured vanadium pentoxide xerogel thin film. Physical Chemistry Chemical Physics, 2015. 17(45): p. 30248–30254.Google ScholarPubMed
Tuna, O., et al. ., High quality ITO thin films grown by dc and RF sputtering without oxygen. Journal of Physics D: Applied Physics, 2010. 43(5): p. 055402.Google Scholar