Hostname: page-component-586b7cd67f-t7fkt Total loading time: 0 Render date: 2024-11-27T22:56:53.172Z Has data issue: false hasContentIssue false
  • English
  • Français

Surface Roughening with Iron Nanoparticles for Promoted Adhesion of Spin Coated Microsupercapacitor Electrodes

Published online by Cambridge University Press:  14 January 2019

A. Vyas ,
Q. Li ,
F. Cornaglia ,
K. Wang ,
A. Anderson ,
M. Haque ,
V. Kuzmenko ,
A. D. Smith ,
P. Lundgren  and
P. Enoksson
A. Vyas*
Affiliation:
Micro and Nano Systems Group, MC2, Chalmers University of Technology, Sweden;
Q. Li
Affiliation:
Micro and Nano Systems Group, MC2, Chalmers University of Technology, Sweden;
F. Cornaglia
Affiliation:
Politecnico Di Torino, Italy;
K. Wang
Affiliation:
Micro and Nano Systems Group, MC2, Chalmers University of Technology, Sweden;
A. Anderson
Affiliation:
University of California, Santa Barbara, USA
M. Haque
Affiliation:
Micro and Nano Systems Group, MC2, Chalmers University of Technology, Sweden;
V. Kuzmenko
Affiliation:
Micro and Nano Systems Group, MC2, Chalmers University of Technology, Sweden;
A. D. Smith
Affiliation:
Micro and Nano Systems Group, MC2, Chalmers University of Technology, Sweden;
P. Lundgren
Affiliation:
Micro and Nano Systems Group, MC2, Chalmers University of Technology, Sweden;
P. Enoksson
Affiliation:
Micro and Nano Systems Group, MC2, Chalmers University of Technology, Sweden;
*
*(Email: [email protected])
Get access

Abstract

Microsupercapacitors (MSCs) are miniaturized energy storage devices that can be integrated in an on-chip platform as a component of a power supply for Internet of things’ sensors. Integration of these on-chip MSCs require them to be fabricated through CMOS compatible fabrication techniques such as spin coating. One of the biggest challenges in spin coated MSCs is the poor surface adhesion. In this work, we present a CMOS compatible electrode deposition process with enhanced adhesion and retention for reduced graphene oxide (rGO) using spin coating. In order to improve the adhesion and surface uniformity of the deposited electrode material, the surface of Si/SiO2 wafers was subjected to roughening through Fe nanoparticle formation. A 4 nm thick Fe layer deposition substantially magnified the average mean surface roughness of the substrates. In comparison with substrates without the Fe deposition, the treated ones have more than 300% improvement in surface coverage and rGO mass retention after sonication testing. These results suggest that the surface roughening has a positive influence on electrode deposition via a spin-coating method.

Keywords

adhesionmicroelectromechanical systems (MEMS)Femicroscale
Type
Articles
Information
MRS Advances , Volume 4 , Issue 23: Biomaterials and Soft Materials , 2019 , pp. 1335 - 1340
Copyright
Copyright © Materials Research Society 2019 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Lee, I. and Lee, K., Bus. Horiz., vol. 58, no. 4, pp. 431–440, (2015).CrossRefGoogle Scholar
An, S. J. et al. , J.Phys. Chem. Lett. (2010).Google Scholar
Beidaghi, M., Wang, Z., Gu, L., and Wang, C., J. Solid St. Electrochem. (2012).Google Scholar
Lee, S. W., Chen, S., and Hammond, P. T., Carbon N. Y. (2010).Google Scholar
Smith, A. D. et al. , J. Phys. Conf. Ser., vol. 1052, no. 1 (2018).CrossRefGoogle Scholar
Portet, C., Taberna, P. L., Simon, P., and Flahaut, E., J. Electrochem. Soc. (2006).Google Scholar
Huang, Y. et al. , ACS Appl. Mater. Interfaces (2018).Google ScholarPubMed
Cher, M. and Davidson, N., J. Am. Chem. Soc. (1955).Google Scholar