Hostname: page-component-586b7cd67f-gb8f7 Total loading time: 0 Render date: 2024-11-24T14:53:37.219Z Has data issue: false hasContentIssue false
  • English
  • Français

Study of Flexoelectricity in Graphene Composite Structures

Published online by Cambridge University Press:  05 August 2016

Mohamed Serry  and
Mahmoud A. Sakr
Mohamed Serry*
Affiliation:
Department of Mechanical Engineering, The American University in Cairo, AUC Avenue, 11835, New Cairo, Egypt
Mahmoud A. Sakr
Affiliation:
Department of Mechanical Engineering, The American University in Cairo, AUC Avenue, 11835, New Cairo, Egypt
*
*(Email: [email protected])
Get access

Abstract

This paper introduces the theoretical and experimental investigation of flexoelectric behavior in a graphene composite structure consisting of multilayer CVD-graphene deposited on an ALD-platinum catalyst layer deposited on top of n-silicon substrate. The polarization induced by varying the radius of curvature from 200–1500 mm by applying bending stresses was investigated experimentally. Meanwhile, due to the cluster-growth nature of the ALD-platinum catalyst layer, a strong correlation was observed between the resulting number of graphene layers and the Pt catalyst layer thickness, which subsequently had a strong impact on the induced polarization. A polarization current of up to 7.4 mA was detected when the composite structure was bent through a 600-mm radius of curvature. Residual stresses at the interface of the different layers were estimated experimentally in the order of 85–217 MPa. The effect of thermally-induced stresses, residual stresses at the interface layers, thickness of graphene layers, and radius of curvature were investigated theoretically using the finite element method (FEM) and first-principle analyses. Theoretically, it was confirmed that non-uniform strain results in an appreciable non-uniform graphene band gap opening, in addition to non-uniform change of the band structure across the surface and thickness which results in increasing the potential energy difference between the graphene layers. FEM confirmed that thermally induced strains could further enhance the power output of the device by inducing a flexoelectric current combined with the thermionic response. This is verified by estimating a lattice displacement up to 0.31 Å in response to 2-mW heat flux, which corresponds to an appreciable graphene band opening and a potential energy difference across the graphene layers in the order of 1.23 eV, as estimated by the tight binding model.

Keywords

piezoresponseelastic propertiesthermal stresses
Type
Articles
Information
MRS Advances , Volume 1 , Issue 39: Materials Design , 2016 , pp. 2723 - 2729
Copyright
Copyright © Materials Research Society 2016 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Kamat, P. V., “Graphene-Based Nanoassemblies for Energy Conversion,” J. Phys. Chem. Lett., Vol. 2, No. 3, pp. 242–251, February 2011.CrossRefGoogle Scholar
Sahoo, N. G., Pan, Y., Li, L., and Chan, S. H., “Graphene-based materials for energy conversion,” Adv. Mater. Deerfield Beach Fla, Vol. 24, No. 30, pp. 4203–4210, August 2012.Google Scholar
Yudin, P. V. and Tagantsev, A. K., “Fundamentals of flexoelectricity in solids,” Nanotechnology, Vol. 24, No. 43, p. 432001, November 2013.Google Scholar
Baker, L., Cavanagh, A. S., Seghete, D., George, S. M., Mackus, A. J. M., Kessels, W. M. M., Liu, Z. Y., and Wagner, F. T., “Nucleation and growth of Pt atomic layer deposition on Al2O3 substrates using (methylcyclopentadienyl)-trimethyl platinum and O2 plasma,” J. Appl. Phys., Vol. 109, No. 8, p. 84333, April 2011.CrossRefGoogle Scholar
Subrahmanyam, K. S., Manna, A. K., Pati, S. K., and Rao, C. N. R., “A study of graphene decorated with metal nanoparticles,” Chem. Phys. Lett., Vol. 497, No. 1–3, pp. 70–75, September 2010.Google Scholar
Rutter, G. M., Jung, S., Klimov, N. N., Newell, D. B., Zhitenev, N. B., and Stroscio, J. A., “Microscopic polarization in bilayer graphene,” Nat. Phys., Vol. 7, No. 8, pp. 649–655, August 2011.CrossRefGoogle Scholar
Partoens, B. and Peeters, F. M., “ From graphene to graphite: Electronic structure around the K point,” Phys. Rev. B, Vol. 74, p. 075404–1, August 2006.Google Scholar
Serry, M. and Sakr, M. A., “Graphene-metal-semiconductor composite structure for multimodal energy conversion,” Sens. Actuators Phys., Vol. 245, pp. 169–179, July 2016.CrossRefGoogle Scholar