Hostname: page-component-586b7cd67f-tf8b9 Total loading time: 0 Render date: 2024-11-24T08:29:50.484Z Has data issue: false hasContentIssue false
  • English
  • Français

Design Approaches and Achievements of Novel Wrought TiAl Alloys for Jet Engine Applications

Published online by Cambridge University Press:  12 February 2019

Hideki Wakabayashi ,
Loris J. Signori ,
Ali Shaaban Open the ORCID record for Ali Shaaban [Opens in a new window] ,
Ryosuke Yamagata ,
Hirotoyo Nakashima  and
Masao Takeyama
Hideki Wakabayashi
Affiliation:
Dept. Materials Science and Engineering, School of Materials and Chemical Technology, Tokyo Institute of Technology, Meguro-ku, Tokyo, Japan
Loris J. Signori
Affiliation:
Dept. Materials Science and Engineering, School of Materials and Chemical Technology, Tokyo Institute of Technology, Meguro-ku, Tokyo, Japan
Ali Shaaban
Affiliation:
Dept. Materials Science and Engineering, School of Materials and Chemical Technology, Tokyo Institute of Technology, Meguro-ku, Tokyo, Japan
Ryosuke Yamagata
Affiliation:
Dept. Materials Science and Engineering, School of Materials and Chemical Technology, Tokyo Institute of Technology, Meguro-ku, Tokyo, Japan
Hirotoyo Nakashima
Affiliation:
Dept. Materials Science and Engineering, School of Materials and Chemical Technology, Tokyo Institute of Technology, Meguro-ku, Tokyo, Japan
Masao Takeyama*
Affiliation:
Dept. Materials Science and Engineering, School of Materials and Chemical Technology, Tokyo Institute of Technology, Meguro-ku, Tokyo, Japan
*
*(Email: [email protected])
Get access

Abstract

Design approaches and achievements for the development of wrought TiAl alloys to be used for LPT and HPC blades are constructed. In case of Ti-Al-M1-M2 quaternary systems, conventional equivalency concept does not work for the alloy design, and a new thermodynamic database for phase diagram calculations in multi-component systems of the alloys is built by introducing the interaction parameters among four phases of β−Ti, α2−Ti3Al, α−Ti and γ−TiAl phases in the systems, in order to reproduce the experimentally determined phase diagrams. Based on the phase diagram calculations, the composition range of a unique phase transformation pathway of β+α→α→β+γ in the multi-component system can be identified, and thus model alloys with excellent hot workability even at higher strain rate and mechanical properties can be successfully proposed. It can be concluded that an introduction of bcc β phase and the morphology control through the phase transformation pathway make it possible to improve the room temperature ductility, creep and fatigue crack propagation resistance.

Keywords

microstructurephase equilibriaphase transformationfatigue
Type
Articles
Information
MRS Advances , Volume 4 , Issue 25-26: Processing and Manufacturing , 2019 , pp. 1465 - 1470
Check for updates
Copyright
Copyright © Materials Research Society 2019 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Boeing Commercial Market Outlook 2018-2037 (2018). Available at http://www.boeing.com/commercial/market/commercial-market-outlook/ (Accessed 9 Nov. 2018)Google Scholar
Nakamura, H., Takeyama, M., Wei, L., Yamabe, Y., Kikuchi, M., edited by Yamaguchi, M. and Fukutomi, H., (3rdJpn Int. SAMPE Symp. Proc. 1993) pp. 1353-1358Google Scholar
Takeyama, M., Kikuchi, M., Materia Japan, 35 (10), 1058-1064 (1996).CrossRefGoogle Scholar
Tetsui, T., Shindo, K., Kobayashi, S., Takeyama, M., Scripta Materialia, 47, 399 (2002).10.1016/S1359-6462(02)00158-6CrossRefGoogle Scholar
Takeyama, M. and Kobayashi, S., Intermetallics, 13, 993 (2005).CrossRefGoogle Scholar
Bewlay, B. P., Nag, S., Suzuki, A., Weimer, M. J., J. Materials at High Temperatures, 33 (4-5), 549-559 (2016).10.1080/09603409.2016.1183068CrossRefGoogle Scholar
Structural Materials for Innovation (SM4I), Heat Resistant Alloys and Intermetallic Compounds (2014). Available at http://www.jst.go.jp/sip/k03/sm4i/en/project/project-b.html (Accessed 7 March 2015)Google Scholar
Shaaban, A., Wakabayashi, H., Nakashima, H., Takeyama, M. in Advances in Intermetallic-Based Alloys for Structural and Functional Applications , edited by Lewandowski, J., Mayer, S., Nag, S., and Yasuda, H., (Mater. Res. Soc. Symp. Proc., Warrendale, PA, 2019).Google Scholar
Nakashima, H., Takeyama, M. in Advanced Structural and Functional Intermetallic-Based Alloys , edited by Baker, I., Heilmaier, M., Kishida, K., Mills, M. and Miura, S., (Mater. Rer. Soc. Symp. Proc., Warrendale, PA, 2015) 1760, mrsf14-1760-yy06-07.Google Scholar
Saunders, N. in Gamma Titanium Aluminides, edited by Kim, Y.-W., Dimiduk, D.-M., and Loretto (TMS, M.-H., Warrendale, PA 1999), pp. 183-188.Google Scholar
Wakabayashi, H., Nakashima, H, Kobayashi, S., Hayashi, S. and Takeyama, M., JSPS 123 Committee Report, 57 (1), 83-91 (2016).Google Scholar
Signori, L.J., Nakamura, T., Okada, Y., Yamagata, R., Nakashima, H., Takeyama, M., Intermetallics 100, 77 (2018).CrossRefGoogle Scholar
Dahar, M. S., Seifi, S. M., Bewlay, B. P., Lewandowski, J. J., Intermetallics, 57, 73 (2015).CrossRefGoogle Scholar