Article contents
Comparison of Vanadium Oxide Thin Films Prepared Using Femtosecond and Nanosecond Pulsed Laser Deposition
Published online by Cambridge University Press: 03 May 2016
Abstract
Pulsed laser deposition (PLD) is a technique which utilizes a high energy pulsed laser ablation of targets to deposit thin films on substrates in a vacuum chamber. The high-intensity laser pulses create a plasma plume from the target material which is projected towards the substrate whereupon it condenses to deposit a thin film. Here we investigate the properties of vanadium oxide thin films prepared utilizing two variations of the pulsed laser deposition (PLD) technique: femtosecond PLD and nanosecond PLD. Femtosecond PLD (f-PLD) has a significantly higher peak intensity and shorter duration laser pulse compared to that of the excimer-based nanosecond PLD (n-PLD). Experiments have been conducted on the growth of thin films prepared from V2O5 targets on glass substrates using f-PLD and n-PLD. Characterization using SEM, XRD and Raman spectroscopy shows that the f-PLD films have significantly rougher texture prior to annealing and exhibit with an amorphous nano-crystalline character whereas the thin films grown using n-PLD are much smoother and highly predominantly amorphous. The surface morphology, structural, vibrational, and chemical- and electronic-state elemental properties of the vanadium oxide thin films, both prior to and after annealing to 450 °C, will be discussed.
Keywords
- Type
- Articles
- Information
- Copyright
- Copyright © Materials Research Society 2016
References
REFERENCES
- 6
- Cited by