Hostname: page-component-586b7cd67f-dsjbd Total loading time: 0 Render date: 2024-11-24T07:54:49.788Z Has data issue: false hasContentIssue false
  • English
  • Français

Comparative Study of Annealed and High Temperature Grown ITO and AZO Films for Solar Energy Applications

Published online by Cambridge University Press:  19 June 2017

Diego Alonso-Álvarez ,
Lourdes Ferre Llin ,
Alexander Mellor ,
Douglas J. Paul  and
Nicholas J. Ekins-Daukes
Diego Alonso-Álvarez*
Affiliation:
Imperial College London, Department of Physics, London SW7 2AZ, United Kingdom
Lourdes Ferre Llin
Affiliation:
University of Glasgow, School of Engineering, Glasgow G12 8LT, United Kingdom
Alexander Mellor
Affiliation:
Imperial College London, Department of Physics, London SW7 2AZ, United Kingdom
Douglas J. Paul
Affiliation:
University of Glasgow, School of Engineering, Glasgow G12 8LT, United Kingdom
Nicholas J. Ekins-Daukes
Affiliation:
Imperial College London, Department of Physics, London SW7 2AZ, United Kingdom
*
*(Email: [email protected])
Get access

Abstract

We present the optical and electrical properties of ITO and AZO films fabricated directly on silicon substrates under several growth and annealing temperatures, as well as their potential performance when used as low emissivity coatings in hybrid photovoltaic-thermal systems. We use broadband spectroscopic ellipsometry measurements (from 300 nm to 20 μm) to obtain a consistent model for the permittivity of each of the films. The best performance is found using the properties of the ITO film grown at 250 °C, with a state of the art resistivity of 0.2 mΩ-cm and an optimized thickness of 75 nm which leads to an estimated 50% increase in the extracted power compared to a standard diffused silicon solar cell. The Hall mobility and resistivity measurements of all the films are also provided, complementing and supporting the observed optical properties.

Keywords

transparent conductoroptical propertiesphotovoltaic
Type
Articles
Information
MRS Advances , Volume 2 , Issue 53: Energy Storage and Conversion , 2017 , pp. 3117 - 3122
Copyright
Copyright © Materials Research Society 2017 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Ellmer, K., Nature Photon, 6, 1, (2012).CrossRefGoogle Scholar
Green, M. A., J Mater Sci: Mater Electron, 18, 15, (2007).Google Scholar
Khalil, A., Ahmed, Z., Touati, F., and Masmoudi, M.. Proceedings of the 13th Int. Multi-Conference on Systems, Signals & Devices, 342 (2016).Google Scholar
Louwen, A., van Sark, W., Schropp, R., and Faaij, A., Solar Energy Materials and Solar Cells, 147, 295, (2016).CrossRefGoogle Scholar
Alonso-Álvarez, D., Ferre Llin, L., Mellor, A., Paul, D. J., and Ekins-Daukes, N. J., Submitted to Solar Energy, (2017) (unpublished).Google Scholar
Song, S., Yang, T., Liu, J., Xin, Y., Li, Y., and Han, S., App. Surf. Sc., 257, 7061, (2011).Google Scholar
Das, A. K., Misra, P., Ajimsha, R. S., Bose, A., Joshi, S. C., Phase, D. M., and Kukreja, L. M., J. Appl. Phys., 112, 103706–7, (2012).Google Scholar
Lämmle, M., Kroyer, T., Fortuin, S., Wiese, M., and Hermann, M., Solar Energy, 130, 161, (2016).CrossRefGoogle Scholar
Riverola-Lacasta, A., Mellor, A., Alonso-Álvarez, D., Ferre Llin, L., Guarracino, I., Ramos Cabal, A., Thoms, S., Markides, C. N., Paul, D. J., Ekins-Daukes, N. J., and Chemisana, D., Submitted to Progress in Photovoltaics (2017) (unpublished)Google Scholar