Hostname: page-component-586b7cd67f-rdxmf Total loading time: 0 Render date: 2024-11-28T10:32:25.541Z Has data issue: false hasContentIssue false
  • English
  • Français

Low-temperature solution-processed sol-gel K-rich KNN thin films for flexible electronics

Published online by Cambridge University Press:  16 January 2018

Rajinder Singh Deol ,
Meenal Mehra ,
Bhaskar Mitra  and
Madhusudan Singh
Rajinder Singh Deol
Affiliation:
Functional Materials & Devices Laboratory, Electrical Engineering, Indian Institute of Technology Delhi, Hauz Khas, New Delhi, India
Meenal Mehra
Affiliation:
Momentive Performance Materials India Pvt. Ltd., Bengaluru, India
Bhaskar Mitra
Affiliation:
Functional Materials & Devices Laboratory, Electrical Engineering, Indian Institute of Technology Delhi, Hauz Khas, New Delhi, India
Madhusudan Singh*
Affiliation:
Functional Materials & Devices Laboratory, Electrical Engineering, Indian Institute of Technology Delhi, Hauz Khas, New Delhi, India
*
*(Email: [email protected])
Get access

Abstract

Sputtered lead-free piezoelectric materials like potassium sodium niobate (K1-xNaxNbO3 or KNN) have received significant technological interest in recent years in light of several reports of piezoelectric constants comparable to lead zirconium titanate (PZT). Potential applications include self-powered sensors, actuators, and low acoustic impedance transducers. For large area printed applications, it is vital to develop low-temperature solution processed deposition methods. In this work, sol-gel synthesis of K-rich (70:30) KNN was carried out under an argon atmosphere, using acetate precursors, followed by precipitation of white KNN powder upon careful drying. Powder X-ray diffraction (XRD) scans of the product with a Cu Kα source after calcination revealed a dominant (110) peak, accompanied by smaller (100) and (010) peaks, in agreement with published standard KNN data. The composition of K-rich phase was confirmed using energy dispersive X-ray spectroscopy (EDX). To produce thin films, the sol was spin coated on a surface-treated Au-coated Si substrate, followed by slow annealing to obtain low surface roughness films (RMS roughness ﹤∼10 nm) of thickness ∼200 nm after solvent removal. Atomic force microscopy (AFM) scans revealed an unremarkable amorphous film. However, deposition of the sol on the Au-coated backside of Si wafer under similar processing conditions revealed limited polycrystalline film formation observed using optical profilometry. Thin film XRD measurements of the deposited film reveal orthorhombic phase growth of KNN, though the unannealed film was more amorphous than the calcined KNN film. Preliminary piezoresponse force microscopy (PFM) scans were used to estimate a piezoelectric constant (d33) ∼ 2.7 pC/N, consistent with the general expectation of lower piezoelectric constants for thin sol-gel films. The highest processing temperature used at any step during the deposition process was 90°C, consistent with the applications involving flexible polyimide substrates. This low-temperature thin-film growth suggests a potential route towards integration of large area piezoelectric generators for environmentally-friendly autonomous flexible sensor applications, with better control of phase and composition during the solution-phase deposition of KNN.

Keywords

piezoelectricsol-gelenvironmentally benign
Type
Articles
Information
MRS Advances , Volume 3 , Issue 5: Electronics, Magnetics and Photonics , 2018 , pp. 269 - 275
Check for updates
Copyright
Copyright © Materials Research Society 2018 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Khan, A., Abas, Z., Kim, H. S., and Oh, I.-K., Smart Mater. Struct. 25, 053002 (2016).Google Scholar
Baek, S.-H., Rzchowski, M. S., and Aksyuk, V. A., MRS Bulletin 37, 1022 (2012).CrossRefGoogle Scholar
Cakare-Samardzija, L., Malic, B., and Kosec, M., Ferroelectrics 370, 113 (2008).CrossRefGoogle Scholar
Rafiq, M. A., Costa, M. E., and Vilarinho, P. M., ACS Appl. Mater. Interfaces 8, 33755 (2016).CrossRefGoogle Scholar
Dolhen, M., Mahajan, A., Pinho, R., Costa, M. E., Trolliard, G., and Vilarinho, P. M., RSC Adv. 5, 4698 (2014).CrossRefGoogle Scholar
Ahn, C. W., Lee, S. Y., Lee, H. J., Ullah, A., Bae, J. S., Jeong, E. D., Choi, J. S., Park, B. H., and Kim, I. W., J. Phys. D: Appl. Phys. 42, 215304 (2009).CrossRefGoogle Scholar
Handoko, A. D. and Goh, G. K. L., Green Chem. 12, 680 (2010).CrossRefGoogle Scholar
Singh, M., Haverinen, H. M., Dhagat, P., and Jabbour, G. E., Adv. Mater. 22, 673 (2010).CrossRefGoogle Scholar
Choi, H. W., Zhou, T., Singh, M., and Jabbour, G. E., Nanoscale 7, 3338 (2015).CrossRefGoogle Scholar
Egerton, L. and Dillon, D. M., J. Am. Ceram. Soc. 42, 438 (1959).CrossRefGoogle Scholar
Lusiola, T., Chelwani, N., Bortolani, F., Zhang, Q., and Dorey, R. A., Ferroelectrics 422, 50 (2011).CrossRefGoogle Scholar
Soin, N., Boyer, D., Prashanthi, K., Sharma, S., Narasimulu, A. A., Luo, J., Shah, T. H., Siores, E., and Thundat, T., Chem. Commun. 51, 8257 (2015).CrossRefGoogle Scholar
Singh, M., Chae, H. S., Froehlich, J. D., Kondou, T., Li, S., Mochizuki, A., and Jabbour, G., Mater. Res. Soc. Proc. 1197, (2009).CrossRefGoogle Scholar
Singh, M., Haverinen, H. M., Yoshioka, Y., and Jabbour, G. E., in Inkjet Technology for Digital Fabrication, edited by Hutchings, I. M. and Martin, G. D. (John Wiley & Sons, Ltd, 2012), pp. 207–235.CrossRefGoogle Scholar
Kupec, A., Malic, B., Tellier, J., Tchernychova, E., Glinsek, S., and Kosec, M., J. Am. Ceram. Soc. 95, 515 (2012).CrossRefGoogle Scholar
Aksel, E., Forrester, J. S., Foronda, H. M., Dittmer, R., Damjanovic, D., and Jones, J. L., J. Appl. Phys. 112, 054111 (2012).CrossRefGoogle Scholar
Chen, F., Li, Y., Gao, G., Yao, F.-Z., Wang, K., Li, J., Li, X., Gao, X., and Wu, W., J. Am. Ceram. Soc. 98, (2015).Google Scholar