Hostname: page-component-586b7cd67f-2plfb Total loading time: 0 Render date: 2024-11-27T20:54:34.896Z Has data issue: false hasContentIssue false
  • English
  • Français

Material flow analysis as basis for efficient resourcemanagement – the case of aluminium flows in Austria

Published online by Cambridge University Press:  20 November 2014

H. Buchner ,
D. Laner ,
H. Rechberger  and
J. Fellner
Get access

Abstract

Aluminium (Al) consumption growth exceeded those of all other major metals over the lastdecades. The main driver for this development is the broad range of applications for Aland Al-alloys. As the growth in consumption went along with an increase of anthropogenicstocks and flows of Al, information about material cycles became a crucial issue in termsof resource management. In this study a comprehensive material flow analysis (MFA) of theflows and stocks of Al in Austria for the year 2010 is conducted. The focus of thepresented Al balance is on data harmonization and plausibility checks, both based onextensive data and literature research. The stock of Al is derived from bottom-upcalculations indicating a total stock of about 260 kg Al per capita with an annual growthof 11 ± 3.1 kg/cap yr in 2010.Total old Al scrap generation is calculated to be 7 ± 1 kg/cap yr. For considering dataquality aspects of single input data an adopted method for uncertainty assessment has beenapplied to the different material flows. This allowed a consistent evaluation ofuncertainties within the material flow model. Due to the substantial uncertaintiesassociated with end-of-life Al flows and their significance for secondary Al production inAustria, a better data base is needed in order to evaluate and optimize national Al scraputilization in secondary production. Therefore, a dynamic MFA model will be built forAustrian Al flows and, in conjunction with the results from the static analyses, willprovide a reliable decision basis for future Al resource management.

Keywords

Aluminium budgetAustriabottom-upstocksscraprecycling efficiency
Type
Research Article
Information
Metallurgical Research & Technology , Volume 111 , Issue 6 , 2014 , pp. 351 - 357
Copyright
© EDP Sciences, 2014

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Recalde, K., Wang, J., Graedel, T.E., Res. Conser. Recycling 52 (2008) 1271-1282
Hirsch, J., Mater. Trans., 52 (2011) 7
Moors, E.H.M., J. Clean. Prod. 14 (2006) 1121-1138
Bertram, M., Martchek, K.J., Rombach, G., J. Indus. Ecol. 13 (2009) 650-654
Cullen, J.M., Allwood, J.M., Environ. Sci. Technol. 47 (2013) 3057-3064
Quinkertz, R., Rombach, G., Liebig, D., Res. Conser. Recycling 33 (2001) 217-234
Rombach, G., Acta Mater. 61 (2013) 1012-1020
Milford, R.L., Allwood, J.M., Cullen, J.M., Res. Conser. Recycling 55 (2011) 1185-1195
Ciacci, L., et al., Res. Conser. Recycling 72 (2013) 1-8
Liu, G., Müller, D.B., Environ. Sci. Technol. 47 (2013) 4882-4888
Chen, W.-Q., Graedel, T.E., Ecol. Econ. 81 (2012) 92-102
Chen, W.-Q., Shi, L., Res. Conser. Recycling 65 (2012) 18-28
Hatayama, H.E.A., Mater. Trans. 50 (2009) 7
Hatayama, H.E.A., Mater. Trans. 48 (2007) 7
Modaresi, R., Müller, D.B., Environ. Sci. Technol. 46 (2012) 8587-8594
Løvik, A.N., Modaresi, R., Müller, D.B., Environ. Sci. Technol. 48 (2014) 4257-4265
Li, P., et al., J. Indus. Ecol. 15 (2011) 743-759
P.H. Brunner, H. Rechberger, Practical Handbook of Material Flow Analysis, CRC Press LCC, Florida, USA, 2004
Cencic, O., Rechberger, H., J. Environ. Engi. Manage. 18 (2008)
Statistik Austria, Konjunkturerhebung im produzierenden Bereich, Wien, Statistik Austria, 2010
Tsakiridis, P.E., J. Hazar. Mater. 217–218 (2012) 1-10
BMLFUW, Bundes-Abfallwirtschaftsplan 2011, Bundesministerium für Land- und Forstwirtschaft, Österreich, Umwelt und Wasserwirtschaft, 2011
Hatayama, H., et al., Res. Conser. Recycl. 66 (2012) 8-14
H. Buchner, D. Laner, H. Rechberger, J. Fellner, Res. Conser. Recycling (in press)
Austrian Non-Ferrous Metals Federation, 2010
EAA, Market Report 2005, European Aluminium Association, 2005
Statistik Austria, Der Außenhandel Österreichs, Wien, Statistik Austria, 2010
Truttmann, N., Rechberger, H., Res. Conser. Recycling 48 (2006) 249-262
Ducker, Aluminium penetration in Cars, Ducker worldwide, 2011
SCA, KEMI, Swedish Chemicals Agency, 2010
G.S. Mitterbauer, Stefan, H. Rechberger, Charakterisierung der Rostasche der MVA Dürnrohr im Hinblick auf die Rück- gewinnung von Metallen, Institut für Wassergüte, Ressourcenmanagement und Abfallwirtschaft Fachbereich Abfallwirtschaft und Ressourcenman- agement TU Wien, 2009
H. Rechberger, J. Schnöller, P. Aschenbrenner, Verbleib und Menge von verwertbarem (metallischem) Aluminium nach der thermischen Behandlung von Restmüll in Müllverb- rennungsanlagen (ALMA), Institut für Wassergüte, Ressourcenman- agement und Abfallwirtschaft, TU Wien, 2010
S. Skutan, P.H. Brunner, Stoffbilanzen mechanisch-biologischer Anlagen zur Behandlung von Restmüll (SEMBA), Institut für Wassergüte, Ressourcenman- agement und Abfallwirtschaft, TU Wien, 2006
S. ARGE, Aluminiummengen Shredderbe- triebe, 2012
ARA, A.R.A, Altstoff Recycling Austria, 2013
L.E. Muchova, Peter, End-of-waste Criteria for Aluminium and Aluminium Alloy Scrap: Technical Proposals, JRC Scientific and Technical Reports, 2010, p. 69.
J. Hedbrant, L. Sörme, Water, Air, Soil Pollution1 (2000) 43-53
Weidema, B.P., Wesnaes, M.S., Data quality management for life cycle inventories-an example of using data quality indicators 4 (1996) 167-174
J. Feketitsch, B. Hanno, J. Lederer, D. Laner, J. Fellner, Material Flow Analysis of plastic products in Austria: Emphasis on data uncertainties in consumption sectors and solid waste management. Paper presented at the ISWA World Congress, 2013
D. Laner, H. Rechberger, T. Astrup, J. Indus. Ecol. (2014), in press
J.H. Schäfer, Aluminium – der Zukunft verpflichtet. in Innovationstagung 2012 – Materialien und Werkstoffe der Zukunft, 2012
IPTS, Environmental Improvement of Passenger Cars (IMPRO-car), European Comission, p. 216, 2008
J.M. Allwood, Sustainable Materials - with Both Eyes Open. Future Buildings, Vehicles, Products and Equipment – Made Efficiently and Made with Less New Material, Cambridge, UIT Cambridge, p. 373, 2012