Hostname: page-component-586b7cd67f-dlnhk Total loading time: 0 Render date: 2024-11-24T09:48:22.742Z Has data issue: false hasContentIssue false
  • English
  • Français

Identification du comportement thermomécanique d’un alliageCuCr1Zr*

Published online by Cambridge University Press:  06 July 2011

D. Carron ,
J. Wisniewski ,
P. Pilvin ,
M. Carin ,
J. Costa  and
D. Ayrault
D. Carron
Affiliation:
LIMatB, Université de Bretagne-Sud / UEB, Centre de Recherche Ch. Huygens, Rue de Saint-Maudé, BP 92116, 56321 Lorient Cedex, France. e-mail: [email protected]
J. Wisniewski
Affiliation:
LIMatB, Université de Bretagne-Sud / UEB, Centre de Recherche Ch. Huygens, Rue de Saint-Maudé, BP 92116, 56321 Lorient Cedex, France. e-mail: [email protected] CEA, DEN, DM2S, SEMT, LTA, 91191 Gif-sur-Yvette, France
P. Pilvin
Affiliation:
LIMatB, Université de Bretagne-Sud / UEB, Centre de Recherche Ch. Huygens, Rue de Saint-Maudé, BP 92116, 56321 Lorient Cedex, France. e-mail: [email protected]
M. Carin
Affiliation:
LIMatB, Université de Bretagne-Sud / UEB, Centre de Recherche Ch. Huygens, Rue de Saint-Maudé, BP 92116, 56321 Lorient Cedex, France. e-mail: [email protected]
J. Costa
Affiliation:
LIMatB, Université de Bretagne-Sud / UEB, Centre de Recherche Ch. Huygens, Rue de Saint-Maudé, BP 92116, 56321 Lorient Cedex, France. e-mail: [email protected]
D. Ayrault
Affiliation:
CEA, DEN, DM2S, SEMT, LTA, 91191 Gif-sur-Yvette, France
Get access

Abstract

The mechanical properties of a CuCr1Zr alloy were measured with the help of a Gleeble3500 machine at temperatures ranging from 250 °C to 1000 °C. Some tensile tests were alsoperformed at 20 °C. The measured data were first used to determine the thermal linearcoefficient at different temperatures. The measured curves were then simulated with anelasto-visco-plastic constitutive model assuming that the material behaviour wasisotropic. This law requires the knowledge of temperature dependent parameters that weredetermined by inverse method. This work represents a part of a PhD study on hot tearingsusceptibility during welding.

Keywords

CuCr1Zr alloythermomechanical characterizationconstitutive modelinverse methodsAlliage CuCr1Zrcaractérisation thermomécaniqueloi de comportementméthodes inverses
Type
Research Article
Information
Metallurgical Research & Technology , Volume 107 , Issue 10-11 , November 2010 , pp. 445 - 448
Copyright
© EDP Sciences

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Luconi, U. et al., Fus. Eng. Des. 75-79 (2005) 271-276
J. Wisniewski, Thèse de doctorat, Université de Bretagne-Sud, mars 2009
Drezet, J. M. et al., Matér. Tech. 98 (2010) 287–296
Wisniewski, J. et al., Int. J. Mat. Forming, Suppl. 1 (2008) 1059-1062
J. Lemaitre, J.L. Chaboche, Mécanique des matériaux solides, 2e édion, Dunod, Paris, 2004
P. Pilvin, Notice d’utilisation de SiDoLo, Université de Bretagne-Sud, Version 2.4495, 2003
J. Lin, D. Balint, 7th EUROMECH Solid Mechanics Conference, J. Ambrósio et al. (Eds.) Lisbon, Portugal, 7-11 September, 2009, paper_0972_MS-20