Hostname: page-component-78c5997874-94fs2 Total loading time: 0 Render date: 2024-11-04T19:13:01.028Z Has data issue: false hasContentIssue false

A new approach to understanding the effects of surface wettability on nucleate boiling

Published online by Cambridge University Press:  05 August 2009

Hai Trieu Phan
Affiliation:
LITEN/GRETh, CEA Grenoble, 17 rue des Martyrs, 38054 Grenoble Cedex 9, France LEGI, BP 53, 38041 Grenoble Cedex 9, France
Nadia Caney
Affiliation:
LEGI, BP 53, 38041 Grenoble Cedex 9, France
Philippe Marty
Affiliation:
LEGI, BP 53, 38041 Grenoble Cedex 9, France
Stéphane Colasson
Affiliation:
LITEN/GRETh, CEA Grenoble, 17 rue des Martyrs, 38054 Grenoble Cedex 9, France
Jérôme Gavillet
Affiliation:
LITEN/LTS, CEA Grenoble, 17 rue des Martyrs, 38054 Grenoble Cedex 9, France
Get access

Abstract

Although boiling process has been a major subject of research for several decades, its physics still remain unclear and require further investigation. This study aims at highlighting the effects of surface wettability on pool boiling heat transfer. Nanocoating techniques were used to vary the water contact angle from 20 to 110° by modifying nanoscale surface topography and chemistry. The experimental results obtained disagree with the predictions of the classical models. A new approach of nucleation mechanism is established to clarify the nexus between the surface wettability and the nucleate boiling heat transfer. In this approach, we introduce the concept of macro- and micro- contact angles to explain the observed phenomenon.

Type
Research Article
Copyright
© AFM, EDP Sciences, 2009

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Fritz, W., Maximum volume of vapor bubbles, Phys. Z. 36 (1935) 379384
Wang, C.H., Dhir, V.K., Effect of surface wettability on active nucleate site density during pool boiling of water on a vertical surface, Trans ASME J. Heat Transfer 115 (1993) 670679 CrossRef
Kandlikar, S.G., A theoretical model to predict pool boiling FC incorporating effects of contact angle and orientation, J. Heat Transfer 123 (2001) 10711079 CrossRef
B. Truong, L.W. Hu, J. Buongiorno, Surface modifications using nanofluids for nucleate boiling heat transfer, ICNMM2008-62085, Darmstadt, Germany, 2008
Buyevich, Y.A., Webbon, B.W., Dynamics of vapour bubbles in nucleate boiling, Int. J. Heat Mass Transfer 39 (1996) 24092426 CrossRef
D.S. Wen, B.X. Wang, Effects of surface wettability on nucleate pool boiling heat transfer for surfactant solutions, Int. J. Heat and Mass Transfer, 45 (2002) 1739–1747
Griffith, P., Wallis, J.D., The role of surface conditions in nucleate boiling, Chem. Eng. Prog. Symp. Ser. 56 (1960) 4963
Gaertner, R.F., Methods and means for increasing the heat transfer coefficient between a wall and boiling liquid, US Patent 3 (1967) 301314
Hummel, R.L., Means for increasing the heat transfer coefficient between a wall and boiling liquid, US Patent 3 (1965) 207209
Vachon, R.I., Nix, G.H., Tanger, G.E., Evaluation of constants for the Rohsenow pool boiling correlation, J. Heat Trans. 90 (1968) 239247 CrossRef
S.C. Johnathan, J. Kim, Nanofluid boiling: The effect of surface wettability, Int. J. Heat and Mass Transfer, doi:10.1016/j.ijheatfluidflow.2008.07.004
Takata, Y., Hidaka, S., Cao, J.M., Nakamura, T., Yamamoto, H., Masuda, M., Ito, T., Effect of surface wettability on boiling and evaporation, Energy 30 (2005) 209220 CrossRef
Mitrovic, J., Formation of a liquid jet after detachment of a vapour bubble, Int. J. Heat and Mass Transfer 40 (1997) 43094317 CrossRef
Bankoff, S.G., Ebullition from solid surfaces in the absence of a pre-existing gaseous phase, Trans. Am. Mech. Engrs. 79 (1957) 735740
Kim, H., Kim, M., Effect of nanoparticle deposition on capillary wicking that influences the critical heat flux in nanofluids, Appl. Phys. Lett. 91 (2007) 014104 CrossRef