Hostname: page-component-cd9895bd7-7cvxr Total loading time: 0 Render date: 2024-12-25T04:13:16.645Z Has data issue: false hasContentIssue false
  • English
  • Français

Numerical experiment for focus of rotating and propagating LIB in Plasma I—Quasi-neutral approximation

Published online by Cambridge University Press:  09 March 2009

Takayuki Aoki  and
Keishiro Niu
Takayuki Aoki
Affiliation:
Department of Energy Sciences, the Graduate School at Nagatsuta, Tokyo Institute of Technology, Nagatsuta, Midori-ku, Yokohama 227, Japan
Keishiro Niu
Affiliation:
Department of Energy Sciences, the Graduate School at Nagatsuta, Tokyo Institute of Technology, Nagatsuta, Midori-ku, Yokohama 227, Japan
Get access Rights & Permissions [Opens in a new window]

Abstract

Focusing processes of a rotating and propagating light ion beam in the drift region are studied numerically by using a 2-dimensional hybrid (particle–fluid) code. An intense ion beam with the current density of 8 kA/cm2 and the total current of 2·5 MA, which is extracted from the diode with the applied voltage of 5·6 MV, is injected into the drift region filled with a low-density plasma. When a radial magnetic field is applied to the neighborhood of entrance, the beam ions start to rotate in the azimuthal direction owing to the Lorentz force. When the pressure of the background plasma is chosen such as the density of the beam becomes comparable with that of the background plasma in the vicinity of the focal spot, the current-neutralization fraction decreases and large self-magnetic fields are induced. The beam is confined by the fields within a small radius, even after passing the focal spot. Because the angular momentum of the beam is conserved, the beam rotation velocity increases up to the same order of the propagation one at a few mm radius. This rotation motion induces the azimuthal magnetic field and stabilizes the beam propagation. In the case where the plasma pressure was 3·0 Torr and the 0·2-Tesla radial magnetic field was applied over the distance of 2·0 cm near the entrance, the maximum beam intensity of 108TW/cm2 in the axial direction was obtained and the half width at half maximum (HWHM) of the focused profile was 3·5 mm.

Type
Research Article
Information
Laser and Particle Beams , Volume 6 , Issue 4 , November 1988 , pp. 737 - 750
Copyright
Copyright © Cambridge University Press 1988

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Aoki, T. & Niu, , 1987a Laser and Particle Beams, 5, 481.Google Scholar
Aoki, T. & Niu, K. 1987b J. Phys. Soc. Jpn., 56, 3525.Google Scholar
Birdsall, C. K. & Langdon, A. B. 1985 Plasma Physics via Computer Simulation (McGraw-Hill).Google Scholar
Braoinskii, S. I. 1965 Rev. Plasma Phys., 1, 205.Google Scholar
Johnson, D. J. et al. 1985 J. Appl. Phys., 58, 12.Google Scholar
Maenchen, J. E. et al. 1986 Proc. 6th Intl. Conf. on High Power Particle Beams,Kobe, Japan.Google Scholar
Mankofsky, A., Sudan, R. N. & Denavit, J. 1987 J. Comp. Phys., 70, 89.CrossRefGoogle Scholar
Morse, R. L. 1970 in Methods of Computational Physics, Vol 9, edited by Alder, B., Fernbach, B. and Rotenberg, (Academic Press, New York).Google Scholar
Niu, K. et al. 1984 Proc. 14th Int. Symp.Rarefied Gas Dynamics, Tsukuba Science City, Japan Vol. 2.Google Scholar
Niu, K. & Kawata, S. 1987 Fusion Tech., 11, 365.Google Scholar
Ottinger, P. F., Mosher, D. & Goldstein, S. A. 1980 Phys. Fluids, 23, 909.Google Scholar
Sgro, A. G. & Nielson, C. W. 1976 Phys. Fluids, 19, 126.CrossRefGoogle Scholar
VanDevender, J. P. et al. 1987a Laser and Particle Beams, 3, 93.Google Scholar
VanDevender, J. P. et al. 1987b Laser and Particle Beams, 5, 439.CrossRefGoogle Scholar