Hostname: page-component-78c5997874-fbnjt Total loading time: 0 Render date: 2024-11-03T08:55:09.186Z Has data issue: false hasContentIssue false
  • English
  • Français

Generation and focusing of high-power ion beams in a magnetically insulated diode with applied B field

Published online by Cambridge University Press:  09 March 2009

V. M. Bystritskii ,
I. V. Lisitsyn ,
S. N. Volkov ,
Ya. E. Krasik  and
N. M. Polkovnikova
V. M. Bystritskii
Affiliation:
Institute of Electrophysics, 620219, Sverdlovsk, USSR
I. V. Lisitsyn
Affiliation:
Institute of Electrophysics, 620219, Sverdlovsk, USSR
S. N. Volkov
Affiliation:
Insitute of Nuclear Physics, 634050, Tomsk, USSR
Ya. E. Krasik
Affiliation:
Insitute of Nuclear Physics, 634050, Tomsk, USSR
N. M. Polkovnikova
Affiliation:
Insitute of Nuclear Physics, 634050, Tomsk, USSR
Get access Rights & Permissions [Opens in a new window]

Abstract

The results of high-power ion beam (HPIB) generation and in the magnetically insulated diode (MID) installed on a 3 × 1010-W nanosecond accelerator are given. The possibility of efficient HPIB ballistic focusing with the use of the preformed plasma in the HPIB transport region was demonstrated.

Several new diagnostics (spring pendulum and acoustic probe) were used to measure the plasma ablation pressure during the impact of the HPIB with the target.

The highest degree of HPIB focusing attained during the experiments with spherical geometries of the diode electrodes was equal to 60. The ablation average pressures measured by the spring pendulum gave several kilobars for 8–10 kA/cm2 of HPIB density. The peak pressure measured by acoustic probes attained tens of kilobars for the same HPIB current amplitudes.

Type
Research Article
Information
Laser and Particle Beams , Volume 9 , Issue 3 , September 1991 , pp. 699 - 711
Copyright
Copyright © Cambridge University Press 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Akerman, D. R. et al. 1983 Pribory Technica Experimenta (Soviet), 4, 34.Google Scholar
Dreike, P. L., Burns, E. I. T. & Slutz, S. A. 1986 J. Appl. Phys. 60, 878.CrossRefGoogle Scholar
Dreike, P. L. et al. 1983 In Proceedings of the 5th International Conference on High Power Particle Beams,San Francisco, edited by K. Prestwitch, V. 1, pp. 199–203.Google Scholar
Fedorov, V. M. 1988 In Proceedings of the 7th Symposium on High Current Electronics, edited by Schenin, P.M., Tomsk, USSR, p. 160.Google Scholar
Johnson, D. J., Quintenz, J. P. & Sweeney, M. A. 1985 J. Appl. Phys. 57, 794.CrossRefGoogle Scholar
Johnson, D. J. et al. 1983 In Proceedings of the 5th International Conference on High Power Particle Beams,San Francisco, edited by K. Prestwitch, V. 1, p. 89.Google Scholar
Miyamoto, S. et al. 1981 In Proceedings of the Topical Symposium on Particle Beam Applications to Fusion Research, edited by Niu, K., Institute of Plasma Physics, Nagoya University, p. 166.Google Scholar
Olson, C. L. 1982 J. Fusion Energy 4, 309.Google Scholar