Hostname: page-component-cd9895bd7-p9bg8 Total loading time: 0 Render date: 2024-12-25T04:50:54.159Z Has data issue: false hasContentIssue false
  • English
  • Français

Directions for reactor target design based on the U.S. Heavy Ion Fusion Systems Assessment

Published online by Cambridge University Press:  09 March 2009

D. C. Wilson ,
D. Dudziak ,
G. Magelssen ,
D. Zuckerman  and
D. Driemeyer
D. C. Wilson
Affiliation:
Los Alamos National Laboratory, Los Alamos, New Mexico, U.S.A.
D. Dudziak
Affiliation:
Los Alamos National Laboratory, Los Alamos, New Mexico, U.S.A.
G. Magelssen
Affiliation:
Los Alamos National Laboratory, Los Alamos, New Mexico, U.S.A.
D. Zuckerman
Affiliation:
McDonnell Douglas Astronautics Co., P.O. Box 516, St. Louis, Missouri, U.S.A.
D. Driemeyer
Affiliation:
McDonnell Douglas Astronautics Co., P.O. Box 516, St. Louis, Missouri, U.S.A.
Get access Rights & Permissions [Opens in a new window]

Abstract

The Heavy-Ion Fusion Systems Assessment project is nearing completion of a two-year effort. The resulting system modelwill be used to set directions for future target design work.

Major uncertainties in target design were studied using thecost of electricity as a figure of merit. Net electric power was fixed at 1000 MW to eliminate large effects due to economies of scale. The system is relatively insensitive to target gain, factors of three changes in gain resulting in 8 to 12% changes in electricity cost. Possible increased peak power requirements pose only a small cost risk, but require many more beamlets for transport. A shortening ofthe required ion range causes both cost and beamlet difficulties. A factor of 4 decrease in the required range at a fixed driver energy increases electricity cost by 44% and raises the number of beamlets to 240. Finally, the heavy ion fusion system can accommodate large increases in target costs. Thus, to address the major uncertainties, target design should concentrate on requirements for ion range andpeak driver power.

Type
Research Article
Information
Laser and Particle Beams , Volume 5 , Issue 3 , August 1987 , pp. 517 - 524
Copyright
Copyright © Cambridge University Press 1987

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Badger, B. et al. 1984 KfK Report 3840.Google Scholar
Hovingh, J. et al. 1986 Fusion Technology, 10–3, 1424.CrossRefGoogle Scholar
Lee, E. P. 1986 International Symposium on Heavy Ion Fusion, Washington D. C.Google Scholar
Lindl, J. D. & Mark, J. W. K. 1984 INS International Symp. on Heavy Ion Accelerators and Their Applications to Inertial Fusion, Tokyo, Japan, 629.Google Scholar
Magelssen, G. R. 1986 Fusion Technology, 10–3, 1427.CrossRefGoogle Scholar
Mark, J. W.-K. & Pan, Y. L. 1985 Bull. Amer. Phys. Soc., 20, 1633.Google Scholar
Pendergrass, J. H. & Meier, W. R. 1986 Fusion Technology, 10–3, 1431.CrossRefGoogle Scholar
Pendergrass, J. H. et al. 1981 U.S. DOE Report CONF-80101, 2, 1131.Google Scholar
Pendergrass, J. H. et al. 1986 Fusion Technology,10–3, 1243.Google Scholar
Zuckerman, D. S. et al. 1986 Fusion Technology, 10–3, 1435.Google Scholar