Hostname: page-component-586b7cd67f-2brh9 Total loading time: 0 Render date: 2024-11-28T01:52:10.541Z Has data issue: false hasContentIssue false
  • English
  • Français

The effect of the carbon fibre insert for the Varian Exact™ couch on the attenuation and build-up of high energy photon beams

Published online by Cambridge University Press:  23 November 2010

ML Wilson ,
WP Colley  and
AW Beavis
ML Wilson*
Affiliation:
Queen’s Centre for Oncology and Haematology, Castle Hill Hospital, Cottingham, UK
WP Colley
Affiliation:
Queen’s Centre for Oncology and Haematology, Castle Hill Hospital, Cottingham, UK
AW Beavis
Affiliation:
Queen’s Centre for Oncology and Haematology, Castle Hill Hospital, Cottingham, UK Department of Computer Science, University of Hull, Cottingham Road, UK Faculty of Health and Wellbeing, Sheffield-Hallamshire University, Broomfield Road, Sheffield, UK
*
Correspondence to: ML Wilson, Radiation Physics Department, Queen’s Centre for Oncology and Haematology, Castle Hill Hospital, Cottingham, HU16 5JQ, UK. E-mail: [email protected]
Get access Rights & Permissions [Opens in a new window]

Abstract

Carbon fibre couch inserts are widely used in external beam radiotherapy to provide rigid and lightweight patient support. Carbon fibre is often perceived to be essentially radiotranslucent implying that it does not interfere with the radiation beam. However, there is evidence in the literature which suggests that this perception may not be appropriate, particularly at oblique angles of incidence. Furthermore, there is evidence indicating that the use of carbon fibre significantly reduces the skin sparing effect. In this study, the radiation attenuation and surface dose enhancement characteristics of the carbon fibre insert for the Varian ExactTM couch have been investigated. It was found that attenuation increased significantly with increasing angle of incidence, resulting in in-phantom dose reductions of up to 6% at 6 MV and 4% at 15 MV. It has been shown that it is possible to model couch attenuation on a commercial treatment planning system (Elekta CMS XiO) by including the carbon fibre insert in the planning computed tomography (CT) dataset. Finally, the carbon fibre insert was found to significantly increase skin dose to the patient. The skin dose was approximately three times as large when the couch insert was added to 6 and 15 MV photon beams. However, even with this substantial increase it is highly unlikely that the skin tolerance dose will be exceeded.

Keywords

Carbon Fibretreatment couchattenuationskin dose
Type
Original Article
Information
Journal of Radiotherapy in Practice , Volume 10 , Issue 2 , June 2011 , pp. 77 - 83
Copyright
Copyright © Cambridge University Press 2010

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

De Ost, B, Vanregemorter, J, Schaeken, B, Van den Weyngaert, D. The effect of carbon fibre inserts on the build-up and attenuation of high energy photon beams. Radiother Oncol 1997; 45:275–277.CrossRefGoogle ScholarPubMed
Higgins, DM, Whitehurst, P, Morgan, AM. The effect of carbon fiber couch inserts on surface dose with beam size variation. Med Dosim 2001; 26:251–254.CrossRefGoogle ScholarPubMed
McCormack, S, Diffey, J, Morgan, A. The effect of gantry angle on megavoltage photon beam attenuation by a carbon fiber couch insert. Med Phys 2005; 32:483–487.CrossRefGoogle ScholarPubMed
Myint, WK, Niedbala, M, Wilkins, D, Gerig, LH. Investigating treatment dose error due to beam attenuation by a carbon fiber tabletop. J Appl Clin Med Phys 2006; 7:21–27.CrossRefGoogle ScholarPubMed
Miften, M, Wiesmeyer, M, Monthofer, S, Krippner, K. Implementation of FFT convolution and multigrid superposition models in the FOCUS RTP system. Phys Med Biol 2000; 45:817–833.CrossRefGoogle ScholarPubMed
Nilsson, B, Montelius, A. Fluence perturbation in photon beams under nonequilibrium conditions. Med Phys 1986; 13:191–195.CrossRefGoogle ScholarPubMed
Gerbi, BJ, Khan, FM. Measurement of dose in the buildup region using fixed-separation plane-parallel ionization chambers. Med Phys 1990; 17:17–26.CrossRefGoogle ScholarPubMed
The International Commission on Radiological Units and Measurements. ICRU Report 35: Electron dosimetry: Electron beams with energies between 1 and 50 MeV. ICRU, 1984, p. 105.Google Scholar
Emami, B, Lyman, J, Brown, A, Coia, L, Goitein, M, Munzenrider, JE, Shank, B, Solin, LJ, Wesson, M. Tolerance of normal tissue to therapeutic irradiation. Int J Radiat Oncol Biol Phys 1991; 21:109–122.CrossRefGoogle ScholarPubMed
Van der Kogel, AJ. Radiation response and tolerance of normal tissues. In: Steel, GG (ed.), Basic Clinical Radiobiology, 3rd edn. Arnold, 2002, pp. 33–34.Google Scholar