Hostname: page-component-cd9895bd7-8ctnn Total loading time: 0 Render date: 2024-12-25T05:04:13.470Z Has data issue: false hasContentIssue false
  • English
  • Français

Control of the Hydrofoil Ship

Published online by Cambridge University Press:  18 January 2010

P. Magini  and
J. Burroughs
J. Burroughs
Affiliation:
(Advanced Marine Systems–Alinari S.P.A.)
Get access Rights & Permissions [Opens in a new window]

Extract

Modern hydrofoil ships have evolved in response to the need for a fast reliable means of sea transportation which is capable of operating in all sea conditions. It is the purpose of this paper to describe how the application of modern stabilization and navigation technology to hydrofoil ships has contributed to the achievement of these goals.

First, consider the subject of stability. In particular, consider the source of roll stability in three types of ships: a displacement ship; a surface piercing hydrofoil and a submerged-foil hydrofoil. A roll disturbance of each of the ships is depicted in Fig. 1. In both the displacement ship and in the surface piercing hydrofoil, the righting moment is produced entirely by the change in attitude of the ship relative to the water surface. In the case of the displacement ship, the righting moment is due to the shift of the centre of buoyancy. For the surface piercing hydrofoil, the moment occurs due to the shift of the hydrodynamic pressure centre of the foils. However, for the submerged-foil hydrofoil, no righting moment is produced by the change of the relative position of the water surface. The righting moment for this ship must be produced by underwater control surfaces in response to the change of ship attitude relative to inertial space, as sensed by a vertical gyro. It is this transfer of stability reference from the water surface to an inertial reference that leads to the superior seakeeping capabilities of the submerged foil hydrofoil.

Type
Automation as Applied to the Conduct of Craft by Sea and in the Air
Information
The Journal of Navigation , Volume 20 , Issue 3 , July 1967 , pp. 292 - 303
Copyright
Copyright © The Royal Institute of Navigation 1967

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1Savitsky, Daniel. (1966). On the seakeeping of planing hulls, Davidson Laboratory Stevents Institute of Technology presented at SNAME Meeting of 27 May 1966, Miami, Florida.Google Scholar
2Oakley, O. H. (1962) “Hydrofoils—a ‘state of the art’ Summary”, Aerospace Engineering.Google Scholar
3Etkin, B. (1959). Dynamics of Flight—Stability and Control. John Wiley and Sons, New York, N.Y.CrossRefGoogle Scholar
4Perkins, C. D. and Hage, R. E. (1957). Airplane Performance Stability and Control, John Wiley and Sons, New York, N.Y.Google Scholar
5Stevens, D. L. (1964). The Bureau of Ships Hydrofoil Craft FRESH-1, Chesapeake Section SNAME, February.Google Scholar
6Jamieson, J. J. (1966). ‘Controls Technology in Hydrofoil Ship Design’, Ship Control Systems Symposium, Annapolis, Maryland, November.Google Scholar