Hostname: page-component-78c5997874-8bhkd Total loading time: 0 Render date: 2024-11-15T21:14:35.597Z Has data issue: false hasContentIssue false
  • English
  • Français

Design and Fabrication of Anisotropic Conductive Film for Application of Probe Card

Published online by Cambridge University Press:  10 April 2017

W. H. Hsu ,
M. C. Chou  and
H. Y. Tsai
W. H. Hsu
Affiliation:
Department of Mechanical EngineeringNational United UniversityMiaoli, Taiwan
M. C. Chou
Affiliation:
Mechanical and Mechatronics Systems Research Lab. Industrial Technology Research InstituteHsinchu, Taiwan
H. Y. Tsai*
Affiliation:
Department of Power Mechanical EngineeringNational Tsing Hua UniversityHsinchu, Taiwan
*
*Corresponding author ([email protected])
Get access

Abstract

Prior to integrated circuit (IC) packaging, die performance must be verified using probe cards to screen for defective products. With the decrease in IC line width, the dimensions of the pads used for performance verification and the spacing between adjacent pads have also decreased. However, when the pad pitch is reduced to less than 30 μm, commonly used probe cards will face manufacturing problems in miniaturization. To resolve probe card manufacturing problems caused by the miniaturization of IC components, the use of an anisotropic conductive film (ACF) in probe cards was proposed in this study. Theoretical calculations and experimental testing of this probe structure were conducted to demonstrate the feasibility of this concept.

In theoretical calculations, composite material and buckling theory were utilized to evaluate the buckling behavior of the ACF. In experimental testing, photolithography and electroplating techniques were used to control the line width and spacing intervals of the micron-scale metal wires in the ACF. After the ACF was fabricated, the mechanical properties of the ACF during wafer testing were assessed. Theoretical analyses and experimental testing verified that ACFs can potentially be applied to the performance verification of IC products. In the ACF structure, multiple probes came into contact with each pad. Therefore, ACFs can potentially be applied to the performance verification of IC components with pad diameters of less than 20 μm. The results of this study directly benefit the miniaturization of ICs.

Keywords

Probe cardAnisotropic conductive filmBucklingComposite materialPhotolithographyElectroplating
Type
Research Article
Information
Journal of Mechanics , Volume 33 , Issue 5 , October 2017 , pp. 655 - 661
Copyright
Copyright © The Society of Theoretical and Applied Mechanics 2017 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Chang, D.-Y. and Choi, J.-T., “Geometric Parameter Design of a Cantilever Probing Needle used in Epoxy Ring Probe Card,” Journal of Materials Processing Technology, 209, pp. 38–50 (2009).Google Scholar
2. Taber, L. F., “An Introduction to Area Array Probing,” IEEE International Test Conference, pp. 277–281 (1998).Google Scholar
3. Smith, K., “Membrane Cards with Microscrub Technology,” 9th Annual IEEE Southwest Test Workshop (1999).Google Scholar
4. Kister, J. and Franch, R. L., “Advance in Membrane Probe Technology,” IEEE International Test Conference, pp. 927–935 (1992).Google Scholar
5. Kister, J. and Franch, R. L., “Membrane Probe Card Technology,” IEEE International Test Conference, pp. 601–607 (1988).Google Scholar
6. Cu Wire Fine Pitch Wire Bonding Technology, http://www.spil.com.tw/technology/?u=2 (2017).Google Scholar
7. Chou, M.-C., Kao, T.-H. and Tsai, J.-H., “Conductive Film Structure and Conductive Film Type Probe Device for Ics.” U.S. Patent Application No. 13/887, 091 (2013).Google Scholar
8. Sato, M., Konishi, Y. and Park, S.-J., “Interlayer Coupling Effect on Buckling Modes of Spherical Bilayers,” Journal of Mechanics, 31, pp. 29–36 (2015).Google Scholar
9. Wang, Y.-G., Lin, W.-H., Zhou, C.-L. and Liu, R.-X., “Thermal Postbuckling and Free Vibration of Extensible Microscale Beams Based on Modified Couple Stress Theory,” Journal of Mechanics, 31, pp. 37–46 (2015).Google Scholar
10. Harasawa, S. and Sato, M., “Helical Buckling of Slender Beam Structures Surrounded by an Elastic Medium,” Journal of Mechanics, 31, pp. 241–247 (2015).Google Scholar
11. Mashat, D. S., Zenkour, A. M. and Sobhy, M., “Investigation of Vibration and Thermal Buckling of Nanobeams Embedded in An Elastic Medium Under Various Boundary Conditions,” Journal of Mechanics, 32, pp. 277–287 (2016).Google Scholar