Hostname: page-component-cd9895bd7-jn8rn Total loading time: 0 Render date: 2024-12-18T18:36:17.185Z Has data issue: false hasContentIssue false
  • English
  • Français

Failure Response of Two Serial Bolted Joints in Composite Laminates

Published online by Cambridge University Press:  31 August 2011

F. Sen  and
O. Sayman
F. Sen*
Affiliation:
Department of Mechanical Engineering, University of Sheffield, Sheffield, United Kingdom Department of Mechanical Engineering, Aksaray University, Aksaray, Turkey
O. Sayman
Affiliation:
Department of Mechanical Engineering, Dokuz Eylul University, Bornova, Izmir, Turkey
*
*Assistant Professor, corresponding author
Get access

Abstract

In this study, the failure response of two serial bolted joints in composite laminates was investigated. The composite material was consisted of epoxy matrix and glass fibers. To find out the effects of joint geometry and stacking sequences on the failure response, parametric studies were performed experimentally. Three different geometrical parameters that were the edge distance-to-hole diameter ratio (E/D), plate width-to-hole diameter ratio (W/D) and the distance between two serial holes-to-hole diameter ratio (K/D) were investigated. Hence, E/D, W/D and K/D ratios were considered from 1 to 5, 2 to 5 and 3 to 5, respectively. In addition, the failure tests were carried out for a range of preload moments as 2, 3, 4, 5 Nm and without any preload moments as 0Nm. Tested composite laminates were oriented two different stacking sequences as [0°]8 and [0°/0°/90°/90°]s. Experimental results point out that failure response of two serial bolted composite joints are firmly effected from material parameters, geometrical parameters and the magnitudes of applied preload moments.

Keywords

Layered structuresGlass fibresDamage mechanicsMechanical testing
Type
Articles
Information
Journal of Mechanics , Volume 27 , Issue 3 , September 2011 , pp. 293 - 307
Copyright
Copyright © The Society of Theoretical and Applied Mechanics, R.O.C. 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Kallmeyer, A. R. and Stephens, R. I., “A Finite Element Model for Predicting Time-Dependent Deformations and Damage Accumulation in Laminated Composite Bolted Joints,” Journal of Composite Materials, 33, pp. 794–826 (1999).CrossRefGoogle Scholar
2. Ahn, H. S., Kweon, J. H. and Choi, J. H., “Failure of Unidirectional-Woven Composite Laminated Pin-Loaded Joints,” Journal of Reinforced Plastics and Composites, 24, pp. 735–752 (2005).CrossRefGoogle Scholar
3. Sun, H. T., Chang, F. K. and Qing, X., “The Response of Composite Joints with Bolt-Clamping Loads, Part II: Model Verification,” Journal of Composite Materials, 36, pp. 69–92 (2002).Google Scholar
4. Pierron, F., Cerisier, F. and Grediac, M., “A Numerical and Experimental Study of Woven Composite Pin-Joints,” Journal of Composite Materials, 34, pp. 1028–1054 (2000).CrossRefGoogle Scholar
5. Okutan, B., “The Effects of Geometric Parameters on the Failure Strength for Pin-Loaded Multi-Directional Fiber-Glass Reinforced Epoxy Laminate,” Composites Part B: Engineering, 33, pp. 567–578 (2002).CrossRefGoogle Scholar
6. Chang, F. K., Scott, R. A. and Springer, G. S., “Strength of Mechanically Fastened Composite Joints,” Journal of Composite Materials, 16, pp. 470–494 (1982).CrossRefGoogle Scholar
7. Pakdil, M., Sen, F., Sayman, O. and Benli, S., “The Effect of Preload on Failure Response of Glass-Epoxy Laminated Composite Bolted-Joints with Clearance,” Journal of Reinforced Plastics and Composites, 26, pp. 1239–1252 (2007).CrossRefGoogle Scholar
8. Sayman, O., Siyahkoc, R., Sen, F. and Ozcan, R., “Experimental Determination of Bearing Strength in Fiber Reinforced Laminated Composite Bolted-Joints Under Preload,” Journal of Reinforced Plastics and Composites, 26, pp. 1051–1063 (2007).CrossRefGoogle Scholar
9. Mallick, P. K., “Fiber-Reinforced Composites Materials,” Manufacturing, and Design, Second Ed.,, Marcel Decker (1993).Google Scholar
10. Kradinov, V., Madenci, E. and Ambur, D. R., “Combined In-Plane and Through-The-Thickness Analysis for Failure Prediction of Bolted Composite Joints,” Composite Structures, 77, pp. 127–147 (2007).CrossRefGoogle Scholar
11. Yan, Y., Wen, W. D., Chang, F. K. and Shyprykevich, P., “Experimental Study on Clamping Effects on the Tensile Strength of Composite Plates with a Bolt-Filled Hole,” Composites Part A: Applied Science and Manufacturing, 30, pp. 1215–1229 (1999).CrossRefGoogle Scholar
12. Tong, L. “Bearing Failure of Composite Bolted Joints with Non-Uniform Bolt-To-Washer Clearance,” Composites Part A: Applied Science and Manufacturing, 31, pp. 609–615 (2000).CrossRefGoogle Scholar
13. Caprino, G., Giorleo, G., Nele, L. and Squillace, A., “Pin-Bearing Strength of Glass Mat Reinforced Plastics,” Composites Part A: Applied Science and Manufacturing, 33, pp. 779–785 (2002).Google Scholar
14. İçten, B. M. and Sayman, O., “Failure Analysis of Pin-Loaded Aluminum-Glass-Epoxy Sandwich Composite Plates,” Composites Science and Technology, 63, pp. 727–737 (2003).Google Scholar
15. Meola, C., Squillace, A., Giorleo, G. and Nele, L., “Experimental Characterization of an Innovative Glare Fiber Reinforced Metal Laminate in Pin Bearing,” Journal of Composite Materials, 37, pp. 1543–1552 (2003).CrossRefGoogle Scholar
16. Okutan, B., “The Effects of Geometric Parameters on the Failure Strength for Pin-Loaded Multi- Directional Fiber-Glass Reinforced Epoxy Laminate,” Composites Part B: Engineering, 33, pp. 567–578 (2002).CrossRefGoogle Scholar
17. Vangrimde, B. and Boukhili, R., “Analysis of the Bearing Response Test for Polymer Matrix Composite Laminates: Bearing Stiffness Measurement and Simulation,” Composite Structures, 56, pp. 359–374 (2002).CrossRefGoogle Scholar
18. Jones, R. M., Mechanics of Composite Material. Taylor and Francis (1999).Google Scholar
19. Gibson, R. F., Principals of Composite Material Mechanics. Mc Graw-Hill (1994).Google Scholar
20. Sen, F., Failure Analysis of Composite Pin-Loaded Joints under Preload Moments, Ph.D. Thesis, Dokuz Eylül University, Izmir (2007).Google Scholar
21. Reddy, J. N., Mechanics of Laminated Composite Plates; Theory and Analysis. CRC Press (1997).Google Scholar
22. İçten, B. M., Karakuzu, R. and Toygar, M. E., “Failure Analysis of Woven Kevlar Fiber Reinforced Epoxy Composites Pinned Joints,” Composite Structures, 73, pp. 443–450 (2006).CrossRefGoogle Scholar