Hostname: page-component-586b7cd67f-l7hp2 Total loading time: 0 Render date: 2024-11-24T12:43:15.694Z Has data issue: false hasContentIssue false
  • English
  • Français

Synthesis of MnOx–CeO2·NOx catalysts by polyvinylpyrrolidone-assisted supercritical antisolvent precipitation

Published online by Cambridge University Press:  01 August 2014

Haoxi Jiang ,
Huiqin Wang ,
Li Kuang ,
Guiming Li  and
Minhua Zhang
Haoxi Jiang
Affiliation:
Key Laboratory for Green Chemical Technology of Ministry of Education, R&D Center for Petrochemical Technology, Tianjin University, Tianjin 300072, China
Huiqin Wang
Affiliation:
Key Laboratory for Green Chemical Technology of Ministry of Education, R&D Center for Petrochemical Technology, Tianjin University, Tianjin 300072, China
Li Kuang
Affiliation:
Key Laboratory for Green Chemical Technology of Ministry of Education, R&D Center for Petrochemical Technology, Tianjin University, Tianjin 300072, China
Guiming Li*
Affiliation:
Key Laboratory for Green Chemical Technology of Ministry of Education, R&D Center for Petrochemical Technology, Tianjin University, Tianjin 300072, China
Minhua Zhang*
Affiliation:
Key Laboratory for Green Chemical Technology of Ministry of Education, R&D Center for Petrochemical Technology, Tianjin University, Tianjin 300072, China
*
b)e-mail: [email protected]
a)Address all correspondence to these authors. e-mail: [email protected]
Get access

Abstract

A series of MnOx–CeO2 binary oxide catalysts were synthesized by polyvinylpyrrolidone -assisted supercritical antisolvent precipitation and the effects of the manganese (Mn)/cerium (Ce) molar ratio and calcination temperature on the structure and properties of MnOx–CeO2 were investigated. A solid solution was obtained at each experimental condition and the highest surface area of 107.6 m2/g was obtained at the Mn/Ce molar ratio of 3:5 and the calcination temperature of 400 °C. Low-temperature selective catalytic reduction of emissions of nitrogen oxides, namely NO, NO2, and N2O (deNOx) with ammonia (NH3) to convert them into nitrogen and water, was used as model reaction to evaluate MnOx–CeO2 catalytic performance. It is found that the activity first increased and then decreased with increasing Mn content and decreased with increasing calcination temperature. The highest catalytic activity (93.3% NO conversion and 100% N2 selectivity) was obtained at the Mn/Ce molar ratio of 1/1 and the calcination temperature of 400 °C, which was attributed to the combination of high surface area and high redox performance of the catalyst.

Type
Articles
Information
Journal of Materials Research , Volume 29 , Issue 18 , 28 September 2014 , pp. 2188 - 2197
Copyright
Copyright © Materials Research Society 2014 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Qi, G.S. and Yang, R.T.: Characterization and FTIR studies of MnOx-CeO2 catalyst for low-temperature selective catalytic reduction of NO with NH3 . J. Phys. Chem. B 108(40), 15738 (2004).Google Scholar
Wu, Z., Jiang, B., and Liu, Y.: Effect of transition metals addition on the catalyst of manganese/titania for low-temperature selective catalytic reduction of nitric oxide with ammonia. Appl. Catal., B: Environ. 79(4), 347 (2008).CrossRefGoogle Scholar
Qi, G.S., Yang, R.T., and Chang, R.: MnOx-CeO2 mixed oxides prepared by co-precipitation for selective catalytic reduction of NO with NH3 at low temperatures. Appl. Catal., B: Environ. 51(2), 93 (2004).Google Scholar
Costa, C.N. and Efstathiou, A.M.: Low-temperature H-2-SCR of NO on a novel Pt/MgO-CeO2 catalyst. Appl. Catal., B: Environ. 72(3–4), 240 (2007).Google Scholar
Carja, G., Kameshima, Y., Okada, K., and Madhusoodana, C.D.: Mn-Ce/ZSM5 as a new superior catalyst for NO reduction with NH3 . Appl. Catal., B: Environ. 73(1–2), 60 (2007).Google Scholar
Kijlstra, W.S., Brands, D.S., Poels, E.K., and Bliek, A.: Kinetics of the selective catalytic reduction of NO with NH3 over MnOx/Al2O3 catalysts at low temperature. Catal. Today 50(1), 133 (1999).Google Scholar
Ettireddy, P.R., Ettireddy, N., Mamedov, S., Boolchand, P., and Smirniotis, P.G.: Surface characterization studies of TiO2 supported manganese oxide catalysts for low temperature SCR of NO with NH3 . Appl. Catal., B: Environ. 76(1–2), 123 (2007).Google Scholar
Wu, Z., Jiang, B., Liu, Y., Zhao, W., and Guan, B.: Experimental study on a low-temperature SCR catalyst based on MnOx/TiO2 prepared by sol-gel method. J. Hazard. Mater. 145(3), 488 (2007).Google Scholar
Chang, H., Li, J., Chen, X., Ma, L., Yang, S., Schwank, J.W., and Hao, J.: Effect of Sn on MnOx-CeO2 catalyst for SCR of NOx by ammonia: Enhancement of activity and remarkable resistance to SO2 . Catal. Commun. 27, 54 (2012).Google Scholar
Wang, Y., Ge, C., Zhan, L., Li, C., Qiao, W., and Ling, L.: MnOx-CeO2/activated carbon honeycomb catalyst for selective catalytic reduction of NO with NH3 at low temperatures. Ind. Eng. Chem. Res. 51(36), 11667 (2012).CrossRefGoogle Scholar
Zou, Z.Q., Meng, M., and Zha, Y.Q.: Surfactant-assisted synthesis, characterizations, and catalytic oxidation mechanisms of the mesoporous MnOx-CeO2 and Pd/MnOx-CeO2 catalysts used for CO and C3H8 oxidation. J. Phys. Chem. C 114(1), 468 (2010).Google Scholar
Arena, F., Trunfio, G., Negro, J., and Spadaro, L.: Optimization of the MnCeOx system for the catalytic wet oxidation of phenol with oxygen (CWAO). Appl. Catal., B: Environ. 85(1–2), 40 (2008).CrossRefGoogle Scholar
Ge, S., He, D., and Li, Z.: A mesoporous Ce(0.5)Zr(0.5)O(2) solid solution catalyst for CO hydrogenation to iso-C(4) hydrocarbons. Catal. Lett. 126(1–2), 193 (2008).Google Scholar
Lin, H.Y., Huang, H.C., and Wang, W.L.: Preparation of mesoporous In-Nb mixed oxides and its application in photocatalytic water splitting for hydrogen production. Microporous Mesoporous Mater. 115(3), 568 (2008).Google Scholar
Morris, S.M., Horton, J.A., and Jaroniec, M.: Soft-templating synthesis and properties of mesoporous alumina-titania. Microporous Mesoporous Mater. 128(1–3), 180 (2010).CrossRefGoogle Scholar
Shen, W., Momoi, H., Komatsubara, K., Saito, T., Yoshida, A., and Naito, S.: Marked role of mesopores for the prevention of sintering and carbon deposition in dry reforming of methane over ordered mesoporous Ni-Mg-Al oxides. Catal. Today 171(1), 150 (2011).CrossRefGoogle Scholar
Xu, J., Xue, B., Liu, Y.M., Li, Y.X., Cao, Y., and Fan, K.N.: Mesostructured Ni-doped ceria as an efficient catalyst for styrene synthesis by oxidative dehydrogenation of ethylbenzene. Appl. Catal., A: Gen. 405(1–2), 142 (2011).Google Scholar
Sun, M., Zou, G., Xu, S., and Wang, X.: Synthesis of alumina supported LaMnO3 with excellent thermal stability by a PVP-assisted route. Mater. Chem. Phys. 134(1), 309 (2012).Google Scholar
Reverchon, E., De Marco, I., Adami, R., and Caputo, G.: Expanded micro-particles by supercritical antisolvent precipitation: Interpretation of results. J. Supercrit. Fluids 44(1), 98 (2008).Google Scholar
Tang, Z.R., Edwards, J.K., Bartley, J.K., Taylor, S.H., Carley, A.F., Herzing, A.A., Kiely, C.J., and Hutchings, G.J.: Nanocrystalline cerium oxide produced by supercritical antisolvent precipitation as a support for high-activity gold catalysts. J. Catal. 249(2), 208 (2007).Google Scholar
Tang, Z.R., Jones, C.D., Aldridge, J.K.W., Davies, T.E., Bartley, J.K., Carley, A.F., Taylor, S.H., Allix, M., Dickinson, C., Rosseinsky, M.J., Claridge, J.B., Xu, Z., Crudace, M.J., and Hutchings, G.J.: New nanocrystalline Cu/MnOx catalysts prepared from supercritical antisolvent precipitation. ChemCatChem 1(2), 247 (2009).Google Scholar
Tang, Z.R., Kondrat, S.A., Dickinson, C., Bartley, J.K., Carley, A.F., Taylor, S.H., Davies, T.E., Allix, M., Rosseinsky, M.J., Claridge, J.B., Xu, Z., Romani, S., Crudace, M.J., and Hutchings, G.J.: Synthesis of high surface area CuMn2O4 by supercritical anti-solvent precipitation for the oxidation of CO at ambient temperature. Catal. Sci. Technol. 1(5), 740 (2011).Google Scholar
Reverchon, E., Della Porta, G., Sannino, D., and Ciambelli, P.: Supercritical antisolvent precipitation of nanoparticles of a zinc oxide precursor. Powder Technol. 102(2), 127 (1999).Google Scholar
Tang, Z.R., Bartley, J.K., Taylor, S.H., and Hutchings, G.J.: Preparation of TiO(2) using supercritical CO(2) antisolvent precipitation (SAS): A support for high activity gold catalysts. In Scientific Bases for the Preparation of Heterogeneous Catalysts, Proceedings of the 9th International Symposium; Gaigneaux, E.M., Devillers, M., De Vos, D.E., Hermans, S., Jacobs, P.A., Martens, J.A., and Ruiz, P., ed, Elsevier, Louvain-la-Neuve, Belgium, 2006; p. 219.CrossRefGoogle Scholar
Jiang, D., Zhang, M., Li, G., and Jiang, H.: Preparation and evaluation of MnOx-CeO2 nanospheres via a green route. Catal. Commun. 17, 59 (2012).CrossRefGoogle Scholar
Jiang, D., Zhang, M., and Jiang, H.: Preparation and formation mechanism of nano-sized MnOx-CeO2 hollow spheres via a supercritical anti-solvent technique. Mater. Lett. 65(8), 1222 (2011).CrossRefGoogle Scholar
Jiang, H., Zhao, J., Jiang, D., and Zhang, M.: Hollow MnOx-CeO2 nanospheres prepared by a green route: A novel low-temperature NH3-SCR catalyst. Catal. Lett. 144(2), 325 (2014).Google Scholar
Machida, M., Uto, M., Kurogi, D., and Kijima, T.: MnOx-CeO2 binary oxides for catalytic NOx sorption at low temperatures. Sorptive removal of NOx . Chem. Mat. 12(10), 3158 (2000).Google Scholar
Li, H., Lu, G., Dai, Q., Wang, Y., Guo, Y., and Guo, Y.: Efficient low-temperature catalytic combustion of trichloroethylene over flower-like mesoporous Mn-doped CeO2 microspheres. Appl. Catal., B: Environ. 102(3–4), 475 (2011).CrossRefGoogle Scholar
Li, X., Lu, X., Meng, Y., Yao, C., and Chen, Z.: Facile synthesis and catalytic oxidation property of palygorskite/mesocrystalline Ce1-xMnxO2 nanocomposites. J. Alloys Compd. 562, 56 (2013).Google Scholar
Murugan, B., Ramaswamy, A.V., Srinivas, D., Gopinath, C.S., and Ramaswamy, V.: Nature of manganese species in Ce1-xMnxO2-delta solid solutions synthesized by the solution combustion route. Chem. Mat. 17(15), 3983 (2005).Google Scholar
Tang, X.F., Li, Y.G., Huang, X.M., Xu, Y.D., Zhu, H.Q., Wang, J.G., and Shen, W.J.: MnOx-CeO2 mixed oxide catalysts for complete oxidation of formaldehyde: Effect of preparation method and calcination temperature. Appl. Catal., B: Environ. 62(3–4), 265 (2006).Google Scholar
Yu, D., Huang, X., Deng, M., Lin, Y., Jiang, L., Huang, J., and Wang, Y.: Effects of inorganic and organic salts on aggregation behavior of cationic gemini surfactants. J. Phys. Chem. B 114(46), 14955 (2010).Google Scholar
Engberts, J.B.F.N.: Effect of counterions on properties of micelles formed by alkylpyridinium surfactants. 1. Conductometry and 1H-NMR chemical shifts. Langmuir 13, 4843 (1997).Google Scholar
Thirupathi, B. and Smirniotis, P.G.: Co-doping a metal (Cr, Fe, Co, Ni, Cu, Zn, Ce, and Zr) on Mn/TiO2 catalyst and its effect on the selective reduction of NO with NH3 at low-temperatures. Appl. Catal., B: Environ. 110, 195 (2011).Google Scholar
Shen, B., Liu, T., Zhao, N., Yang, X., and Deng, L.: Iron-doped Mn-Ce/TiO2 catalyst for low temperature selective catalytic reduction of NO with NH3 . J. Environ. Sci. 22(9), 1447 (2010).Google Scholar
Azalim, S., Franco, M., Brahmi, R., Giraudon, J.M., and Lamonier, J.F.: Removal of oxygenated volatile organic compounds by catalytic oxidation over Zr-Ce-Mn catalysts. J. Hazard. Mater. 188(1–3), 422 (2011).Google Scholar
Wang, X., Kang, Q., and Li, D.: Catalytic combustion of chlorobenzene over MnOx-CeO2 mixed oxide catalysts. Appl. Catal., B: Environ. 86(3–4), 166 (2009).Google Scholar
Larachi, F., Pierre, J., Adnot, A., and Bernis, A.: Ce 3d XPS study of composite CexMn1-xO2-y wet oxidation catalysts. Appl. Surf. Sci. 195(1–4), 236 (2002).CrossRefGoogle Scholar
Delimaris, D. and Ioannides, T.: VOC oxidation over MnOx-CeO2 catalysts prepared by a combustion method. Appl. Catal., B: Environ. 84(1–2), 303 (2008).Google Scholar
Trovarelli, A.: Catalytic properties of ceria and CeO2-containing materials. Catal. Rev.-Sci. Eng. 38(4), 439 (1996).Google Scholar
Zhao, B., Li, G., Ge, C., Wang, Q., and Zhou, R.: Preparation of Ce0.67Zr0.33O2 mixed oxides as supports of improved Pd-only three-way catalysts. Appl. Catal., B: Environ. 96(3–4), 338 (2010).Google Scholar
Fernandez-Garcia, M., Martinez-Arias, A., Iglesias-Juez, A., Belver, C., Hungria, A.B., Conesa, J.C., and Soria, J.: Structural characteristics and redox behavior of CeO2-ZrO2/Al2O3 supports. J. Catal. 194(2), 385 (2000).Google Scholar
Pu, Z.Y., Lu, J.Q., Luo, M.F., and Me, Y.L.: Study of oxygen vacancies in Ce0.9Pr0.1O2-delta solid solution by in situ x-ray diffraction and in situ Raman spectroscopy. J. Phys. Chem. C 111(50), 18695 (2007).Google Scholar
Zhang, M., Jiang, D., and Jiang, H.: Enhanced oxygen storage capacity of Ce0.88Mn0.12Oy compared to CeO2: An experimental and theoretical investigation. Mater. Res. Bull. 47(12), 4006 (2012).Google Scholar
Si, R., Zhang, Y.W., Li, S.J., Lin, B.X., and Yan, C.H.: Urea-based hydrothermally derived homogeneous nanostructured Ce1-xZrxO2 (x = 0-0.8) solid solutions: A strong correlation between oxygen storage capacity and lattice strain. J. Phys. Chem. B 108(33), 12481 (2004).Google Scholar