Hostname: page-component-78c5997874-fbnjt Total loading time: 0 Render date: 2024-11-03T02:05:15.213Z Has data issue: false hasContentIssue false

Promotional effect of Ba additives on MnCeOx/TiO2 catalysts for NH3-SCR of NO at low temperature

Published online by Cambridge University Press:  06 July 2018

Youchun Pan
Affiliation:
College of Materials Science and Engineering, Nanjing Tech University, Nanjing 210009, China; Jiangsu Collaborative Innovation Center for Advanced Inorganic Function Composites, Nanjing Tech University, Nanjing 210009, China; and Jiangsu National Synergetic Innovation Center for Advanced Materials, Nanjing Tech University, Nanjing 210009, China
Yuesong Shen*
Affiliation:
College of Materials Science and Engineering, Nanjing Tech University, Nanjing 210009, China; Jiangsu Collaborative Innovation Center for Advanced Inorganic Function Composites, Nanjing Tech University, Nanjing 210009, China; and Jiangsu National Synergetic Innovation Center for Advanced Materials, Nanjing Tech University, Nanjing 210009, China
Qijie Jin
Affiliation:
College of Materials Science and Engineering, Nanjing Tech University, Nanjing 210009, China; Jiangsu Collaborative Innovation Center for Advanced Inorganic Function Composites, Nanjing Tech University, Nanjing 210009, China; and Jiangsu National Synergetic Innovation Center for Advanced Materials, Nanjing Tech University, Nanjing 210009, China
Shemin Zhu
Affiliation:
College of Materials Science and Engineering, Nanjing Tech University, Nanjing 210009, China; Jiangsu Collaborative Innovation Center for Advanced Inorganic Function Composites, Nanjing Tech University, Nanjing 210009, China; and Jiangsu National Synergetic Innovation Center for Advanced Materials, Nanjing Tech University, Nanjing 210009, China
*
a)Address all correspondence to this author. e-mail: [email protected]
Get access

Abstract

A series of Ba-modified MnCeOx/TiO2 catalysts were prepared by a wet impregnation method and tested for selective catalytic reduction (SCR) of NO with NH3 at low temperature. The results showed that Ba additives obviously improved the catalytic performance of the MnCeOx/TiO2 catalyst for NH3-SCR, and the BaMnCeOx/TiO2 catalyst with 3 wt% BaO exhibited the optimal catalytic performance. Moreover, the introduction of Ba also improved the resistances toward water vapor and SO2 of catalysts. The N2 adsorption, H2-TPR, and X-ray photoelectron spectroscopy results showed that the addition of Ba increased the specific surface area, redox properties, and concentrations of surface Mn4+ and chemisorbed oxygen of catalysts. Furthermore, NH3-TPD and NO-TPD were used to investigate the absorption of NH3 and NO on the catalyst. The results revealed that although the introduction of Ba significantly promoted the adsorption of NO, it also inhibited the adsorption of NH3. Consequently, the catalytic performance of MnCeOx/TiO2 was greatly improved with the Ba additives.

Type
Article
Copyright
Copyright © Materials Research Society 2018 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Liu, C., Shi, J.W., Gao, C., and Niu, C.M.: Manganese oxide-based catalysts for low-temperature selective catalytic reduction of NOx with NH3: A review. Appl. Catal., A 522, 54 (2016).CrossRefGoogle Scholar
Deng, S.C., Zhuang, K., Xu, B.L., Ding, Y.H., Yu, L., and Fan, Y.N.: Promotional effect of iron oxide on the catalytic properties of Fe–MnOx/TiO2 (anatase) catalysts for the SCR reaction at low temperatures. Catal. Sci. Technol. 6, 1772 (2016).CrossRefGoogle Scholar
Jin, Q.J., Shen, Y.S., and Zhu, S.M.: Effect of fluorine additive on CeO2(ZrO2)/TiO2 for selective catalytic reduction of NO by NH3. J. Colloid Interface Sci. 487, 401 (2016).CrossRefGoogle ScholarPubMed
Jin, Q.J., Shen, Y.S., Zhu, S.M., Li, H.Y., and Li, Y.B.: Rare earth ions (La, Nd, Sm, Gd, and Tm) regulate the catalytic performance of CeO2/Al2O3 for NH3-SCR of NO. J. Mater. Res. 32, 2438 (2017).CrossRefGoogle Scholar
Wan, Y.P., Zhao, W.R., Yu, T., Liang, L., Wang, H.J., Cui, Y.L., Gu, J.L., Li, Y.S., and Shi, J.L.: Ni–Mn bi-metal oxide catalysts for the low temperature SCR removal of NO with NH3. Appl. Catal., B 148–149, 114 (2014).CrossRefGoogle Scholar
Gao, R.H., Zhang, D.S., Liu, X.G., Shi, L.Y., Maitarad, P., Li, H.R., Zhang, J.P., and Cao, W.G.: Enhanced catalytic performance of V2O5–WO3/Fe2O3/TiO2 microspheres for selective catalytic reduction of NO by NH3. Catal. Sci. Technol. 3, 191 (2012).CrossRefGoogle Scholar
Zang, S.M., Zhang, G.Z., Qiu, W.G., Song, L.Y., Zhang, R., and He, H.: Resistance to SO2 poisoning of V2O5/TiO2-PILC catalyst for the selective catalytic reduction of NO by NH3. Chin. J. Catal. 37, 888 (2016).CrossRefGoogle Scholar
Han, J., Meeprasert, J., Maitarad, P., Nammuangruk, S., Shi, L.Y., and Zhang, D.S.: Investigation of the facet-dependent catalytic performance of Fe2O3/CeO2 for the selective catalytic reduction of NO with NH3. J. Phys. Chem. C 120, 1523 (2016).CrossRefGoogle Scholar
Wang, X.Y., Wen, W., Mi, J.X., Li, X.X., and Wang, R.H.: The ordered mesoporous transition metal oxides for selective catalytic reduction of NOx at low temperature. Appl. Catal., B 176–177, 454 (2015).CrossRefGoogle Scholar
Li, Y., Li, Y.P., Shi, Q., Qiu, M.Y., and Zhan, S.H.: Novel hollow microspheres MnxCo3−xO4 (x = 1, 2) with remarkable performance for low-temperature selective catalytic reduction of NO with NH3. J. Sol-Gel Sci. Technol. 81, 576 (2017).CrossRefGoogle Scholar
Si, Z.C., Weng, D., Wu, X.D., Li, J., and Guo, L.: Structure, acidity and activity of CuOx/WOx–ZrO2 catalyst for selective catalytic reduction of NO by NH3. J. Catal. 271, 43 (2010).CrossRefGoogle Scholar
Yao, X.J., Kong, T.T., Chen, L., Ding, S.M., Yang, F.M., and Dong, L.: Enhanced low-temperature NH3-SCR performance of MnOx/CeO2 catalysts by optimal solvent effect. Appl. Surf. Sci. 420, 407 (2017).CrossRefGoogle Scholar
Yao, X.J., Ma, K.L., Zou, W.X., He, S.G., An, J.B., Yang, F.M., and Dong, L.: Influence of preparation methods on the physicochemical properties and catalytic performance of MnOx–CeO2 catalysts for NH3-SCR at low temperature. Chin. J. Catal. 38, 146 (2017).CrossRefGoogle Scholar
Yu, Y.K., Chen, J.S., Wang, J.X., and Chen, Y.T.: Performances of CuSO4/TiO2 catalysts in selective catalytic reduction of NOx by NH3. Chin. J. Catal. 37, 281 (2016).CrossRefGoogle Scholar
Zhang, L., Sun, J.F., Xiong, Y., Zeng, X.Q., Tang, C.J., and Dong, L.: Catalytic performance of highly dispersed WO3 loaded on CeO2 in the selective catalytic reduction of NO by NH3. Chin. J. Catal. 38, 1749 (2017).CrossRefGoogle Scholar
Xu, B.Q., Xu, H.D., Lin, T., Cao, Y., Lan, Li, Li, Y.S., Feng, X., Gong, M.C., and Chen, Y.Q.: Promotional effects of Zr on K+-poisoning resistance of CeTiOx catalyst for selective catalytic reduction of NOx with NH3. Chin. J. Catal. 37, 1354 (2016).CrossRefGoogle Scholar
You, X.C., Sheng, Z.Y., Yu, D.Q., Yang, L., Xiao, X., and Wang, S.: Influence of Mn/Ce ratio on the physicochemical properties and catalytic performance of graphene supported MnOx–CeO2 oxides for NH3-SCR at low temperature. Appl. Surf. Sci. 423, 845 (2017).CrossRefGoogle Scholar
Jiang, H.X., Wang, H.Q., Kuang, L., Li, G.M., and Zhang, M.H.: Synthesis of MnOx–CeO2 dot NOx catalysts by polyvinylpyrrolidone-assisted supercritical antisolvent precipitation. J. Mater. Res. 29, 2188 (2014).CrossRefGoogle Scholar
Yang, N.Z., Guo, R.T., Pan, W.G., Chen, Q.L., Wang, Q.S., Lu, C.Z., and Wang, S.X.: The deactivation mechanism of Cl on Ce/TiO2 catalyst for selective catalytic reduction of NO with NH3. Appl. Surf. Sci. 378, 513 (2016).CrossRefGoogle Scholar
Lu, X.N., Song, C.Y., Jia, S.H., Tong, Z.S., Tang, X.L., and Teng, Y.X.: Low-temperature selective catalytic reduction of NOx with NH3 over cerium and manganese oxides supported on TiO2–graphene. Chem. Eng. J. 260, 776 (2015).CrossRefGoogle Scholar
Lin, F.W., He, Y., Wang, Z.H., Ma, Q., Whiddon, R., Zhu, Y.Q., and Liu, J.Z.: Catalytic oxidation of NO by O2 over CeO2–MnOx: SO2 poisoning mechanism. RSC Adv. 6, 31422 (2016).CrossRefGoogle Scholar
Liu, C., Gao, G., Shi, J.W., He, C., Li, G.D., Bai, N., and Niu, C.M.: MnOx–CeO2 shell-in-shell microspheres for NH3-SCR de-NOx at low temperature. Catal. Commun. 86, 36 (2016).CrossRefGoogle Scholar
Qi, G.S., Yang, R.T., and Chang, R.: MnOx–CeO2 mixed oxides prepared by co-precipitation for selective catalytic reduction of NO with NH3 at low temperatures. Appl. Catal., B 51, 93 (2004).CrossRefGoogle Scholar
Boningari, T., Ettireddy, P.R., Somogyvari, A., Liu, Y., Vorontsov, A., Mcdonald, C.A., and Smirniotis, P.G.: Influence of elevated surface texture hydrated titania on Ce-doped Mn/TiO2 catalysts for the low-temperature SCR of NOx under oxygen-rich conditions. J. Catal. 325, 145 (2015).CrossRefGoogle Scholar
Zhao, B.H., Ran, R., Guo, X.G., Cao, Li, Xu, T.F., Chen, Z., Wu, X.D., Si, Z.C., and Weng, D.: Nb-modified Mn/Ce/Ti catalyst for the selective catalytic reduction of NO with NH3 at low temperature. Appl. Catal., A 545, 64 (2017).CrossRefGoogle Scholar
Yan, W., Shen, Y.S., Zhu, S.M., Jin, Q.J., Liu, Y.L., and Li, X.H.: Promotional effect of molybdenum additives on catalytic peroformance of CeO2/Al2O3 for selective catalytic reduction of NOx. Catal. Lett. 146, 1221 (2016).CrossRefGoogle Scholar
Castoldi, L., Lietti, L., Nova, I., Matarrese, R., Forzatti, P., Vindigni, F., Morandi, S., Prinetto, F., and Ghiotti, G.: Alkaline- and alkaline-earth oxides based Lean NOx traps: Effect of the storage component on the catalytic reactivity. Chem. Eng. J. 161, 416 (2010).CrossRefGoogle Scholar
Zhou, C., Feng, Z.J., Zhang, Y.X., Hu, L.J., Chen, R., Shan, B., Yin, H.F., Wang, W.G., and Huang, A.: Enhanced catalytic activity for NO oxidation over Ba doped LaCoO3 catalyst. ChemInform 5, 28054 (2015).Google Scholar
Mousavi, S.M., Niaei, A., Gómez, M.J., Salari, D., Panahi, P.N., and Abaladejo-Fuentes, V.: Characterization and activity of alkaline earth metals loaded CeO2–MOx (M = Mn, Fe) mixed oxides in catalytic reduction of NO. Mater. Chem. Phys. 143, 921 (2014).CrossRefGoogle Scholar
Jin, Q.J., Shen, Y.S., Zhu, S.M., Liu, Q., Li, X.H., and Yan, W.: Effect of praseodymium additive on CeO2(ZrO2)/TiO2 for selective catalytic reduction of NO by NH3. J. Rare Earths 34, 1110 (2016).CrossRefGoogle Scholar
Dong, W.K., Nam, K.B., and Hong, S.C.: Influence of tungsten on the activity of a Mn/Ce/W/Ti catalyst for the selective catalytic reduction of NO with NH3 at low temperatures. Appl. Catal., A 497, 160 (2015).Google Scholar
Meng, D.M., Zhan, W.C., Guo, Y., Guo, Y.L., Wang, L., and Lu, G.Z.: A highly effective catalyst of Sm–MnOx for the NH3-SCR of NOx at low temperature: The promotional role of Sm and its catalytic performance. ACS Catal. 5, 5973 (2015).CrossRefGoogle Scholar
Dong, W.K., Nam, K.B., and Hong, S.C.: The role of ceria on the activity and SO2 resistance of catalysts for the selective catalytic reduction of NOx by NH3. Appl. Catal., B 166–167, 37 (2015).Google Scholar
Shen, Q., Zhang, L.Y., Sun, N.N., Wang, H., Zhong, L.S., He, C., Wei, W., and Sun, Y.H.: Hollow MnOx–CeO2 mixed oxides as highly efficient catalysts in NO oxidation. Chem. Eng. J. 322, 46 (2017).CrossRefGoogle Scholar
Lee, S.M., Park, K.H., Kim, S.S., Kwon, D.W., and Hong, S.C.: Effect of the Mn oxidation state and lattice oxygen in Mn-based TiO2 catalysts on the low-temperature selective catalytic reduction of NO by NH3. J. Air Waste Manag. 62, 1085 (2012).CrossRefGoogle ScholarPubMed
Kang, M., Park, E.D., Kim, J.M., and Yie, J.E.: Manganese oxide catalysts for NOx reduction with NH3 at low temperatures. Appl. Catal., A 327, 261 (2007).CrossRefGoogle Scholar
Zhou, L.L., Li, C.T., Zhao, L.K., Zeng, G.M., Gao, L., Wang, Y., and Yu, M.E.: The poisoning effect of PbO on Mn–Ce/TiO2 catalyst for selective catalytic reduction of NO with NH3 at low temperature. Appl. Surf. Sci. 389, 532 (2016).CrossRefGoogle Scholar
France, L.J., Yang, Q., Li, W., Chen, Z.H., Guang, J.Y., Guo, D.W., Wang, L.F., and Li, X.H.: Ceria modified FeMnOx-enhanced performance and sulphur resistance for low-temperature SCR of NOx. Appl. Catal., B 206, 203 (2017).CrossRefGoogle Scholar
Zhou, A.Y., Yu, D.Q., Yang, L., and Sheng, Z.Y.: Combined effects Na and SO2 in flue gas on Mn–Ce/TiO2 catalyst for low temperature selective catalytic reduction of NO by NH3 simulated by Na2SO4 doping. Appl. Surf. Sci. 378, 167 (2016).CrossRefGoogle Scholar
Zhang, L., Zhang, D., Zhang, J., Cai, S., Fang, C., Huang, L., Li, H., Gao, R., and Shi, L.: Design of meso-TiO2@MnOx–CeOx/CNTs with a core-shell structure as deNOx catalysts: Promotion of activity, stability and SO2–tolerance. Nanoscale 5, 9821 (2013).CrossRefGoogle ScholarPubMed
Song, D.D., Shao, X.Z., Yuan, M.L., Wang, L., Zhan, W.C., Guo, Y.L., Guo, Y., and Lu, G.Z.: Selective catalytic oxidation of ammonia over MnOx–TiO2 mixed oxides. RSC Adv. 6, 88117 (2016).CrossRefGoogle Scholar
Shang, Z., Sun, M., Che, X., Wang, W., Wang, L., Cao, X.M., Zhan, W.C., Guo, Y.L., Guo, Y., and Lu, G.Z.: The existing states of potassium species in K-doped Co3O4 catalysts and their influence on the activities for NO and soot oxidation. Catal. Sci. Technol. 7, 4710 (2017).CrossRefGoogle Scholar
Fang, N.J., Guo, J.X., Shu, S., Luo, H.D., Chu, Y.H., and Li, J.J.: Enhancement of low-temperature activity and sulfur resistance of Fe0.3Mn0.5Zr0.2 catalyst for NO removal by NH3-SCR. Chem. Eng. J. 325, 114 (2017).CrossRefGoogle Scholar
Wu, X., Liu, S., Lin, F., and Weng, D.: Nitrate storage behavior of Ba/MnOx–CeO2 catalyst and its activity for soot oxidation with heat transfer limitations. J. Hazard. Mater. 181, 722 (2010).CrossRefGoogle ScholarPubMed
Lian, Z.H., Liu, F.D., He, H., Shi, X.Y., Mo, J.S., and Wu, Z.B.: Manganese-niobium mixed oxide catalyst for the selective catalytic reduction of NOx with NH3 at low temperatures. Chem. Eng. J. 250, 390 (2014).CrossRefGoogle Scholar
Chen, T., Guan, B., Lin, H., and Zhu, L.: In situ DRIFTS study of the mechanism of low temperature selective catalytic reduction over manganese-iron oxides. Chin. J. Catal. 35, 294 (2014).CrossRefGoogle Scholar
Chen, Y., Zhang, Z.T., Liu, L.L., Mi, L., and Wang, X.D.: In situ DRIFTS studies on MnOx nanowires supported by activated semi-coke for low temperature selective catalytic reduction of NOx with NH3. Appl. Surf. Sci. 366, 139 (2016).CrossRefGoogle Scholar
Xiong, Y., Tang, C.J., Yao, X.J., Zhang, L., Li, L.L., Wang, X.B., Deng, Y., Gao, F., and Dong, L.: Effect of metal ions doping (M = Ti4+, Sn4+) on the catalytic performance of MnOx/CeO2 catalyst for low temperature selective catalytic reduction of NO with NH3. Appl. Catal., A 495, 206 (2015).CrossRefGoogle Scholar
Hong, W.J., Iwamoto, S., Hosokawa, S., Wada, K., Kanai, H., and Inoue, M.: Effect of Mn content on physical properties of CeOx–MnOy support and BaO–CeOx–MnOy catalysts for direct NO decomposition. J. Catal. 277, 208 (2011).CrossRefGoogle Scholar
Supplementary material: File

Pan et al. supplementary material

Figures S1-S5

Download Pan et al. supplementary material(File)
File 2.8 MB